Blade Care
Periodically inspectthe blade adapter for cracks, especially if you strike a foreign object. Replace when necessary.
WARNING: When inspecting the cutting
_lk lade, protect hands by using heavy gloves or a rag to grasp the cutting
blade.
Disconnect spark plug wire from spark plug. Turn mower on its side making sure that the air
filter and the carburetor are up to check the blade. If the blade needs to be serviced, refer
to the instructionson blade care in the "Service
& Adjustments"section of this manual.
Lubrication
Wheels
Lubricate the wheels at least once a season
with light oil or engine oil. Also, ifthe wheels are removed for any reason, lubricatethe surface of the axle bolt and the inner surface of the wheel with light oil.
Blade Control Handle
•Lubricate the pivot points on the blade control handle and the brake cable at least once a
season with light oil. The blade control handle must operate freely in both directions. For complete lubrication chart, see Figure 15.
Chute Deflector
•Lubricate the torsion springand the pivot point on each end of the chute deflector using a light
oil. This will prevent rustingand ensure that the deflector, which is a safety device, can always work properly.
NOTE: Forsake ofctadty,illustrationsin the insetsrepresentviewfromanotherperspectiveratherthanfromthe operatingposition.
Figure 15: Lubrication Chart
14