Craftsman 316350840 manual Maintenance Requirements Check for Damaged or Worn Parts, AIR Filter

Page 18

MAINTENANCE AND REPAIR INSTRUCTIONS

MAINTENANCE REQUIREMENTS

CHECK FOR DAMAGED OR WORN PARTS

Check a Sears Service Center for replacement of dam- aged or worn parts.

NOTE: It is normal for a small amount of oil to appear under the saw after the engine stops. Do not confuse this with a leaking oil tank.

•STOP Switch - Ensure STOP switch functions properly by moving the switch to the STOP position. Make sure the engine stops; then restart engine and continue.

•Fuel Tank - Do not use saw if fuel tank shows signs of damage or leaks.

•Oil Tank - Do not use saw if oil tank shows signs of damage or leaks.

CHECK FOR LOOSE FASTENERS AND PARTS

•Chain Brake Nuts

•Chain

•Muffler

•Cylinder Shield

•Air Filter

•Handle Screws

•Vibration Mounts

•Starter Housing

•Front Hand Guard

AIR FILTER

CAUTION: Never operate saw without the air filter.

Dust and dirt wil be drawn into engine and damage it. Keep the air filter clean.

1.Remove the top cover (A) by loosening the cover retaining screws. Cover will lift off (Fig. 31).

2.Clean air filter. Wash filter in clean, warm, soapy water. Rinse in clear, cool water. Air dry completely.

NOTE: It is advisable to have a supply of spare filters.

3.Install air filter. Install engine / air filter cover. Make sure cover fits properly. Tighten the cover retaining screws securely.

WARNING: To avoid serious per- sonal injury, always

turn your unit off and allow it to cool before you clean or service it.

B

A

Fig. 31

FUEL FILTER

CAUTION: Never operate saw without the fuel filter.

The fuel filter should be replaced after each 20 hours of use. Drain fuel tank before changing.

1.Pull fuel filter (A) out of tank with a bent wire (B) or long needle nosed pliers. Disconnect filter and discard (Fig. 32).

NOTE: Do not pull hose completely out of tank.

2.Install a new fuel filter on hose and push hose and fil- ter assembly back into tank so filter is positioned in front right corner.

3.Fill tank with fresh fuel/oil mixture. See Oil and Fuel Information. Install fuel cap.

A B

Fig. 32

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operator’s Manual Table of Contents Warranty StatementSymbol Meaning Rules for Safe OperationOperate Your SAW Safely Kickback Safety Precautions Maintain Your SAW in Good Working OrderHandle Fuel with Caution Other Safety Precautions Fuel SafetyWear EYE, Hearing and Hardhat Protection Safety Alert SymbolRead Operators Manual Unleaded FuelSafety Features Chain SAW ComponentsKickback Specifics Pinch KickbackOIL and Fuel Information Using Blended FuelsUsing Fuel Additives OIL and Fuel Mixing InstructionsFueling the Engine STARTING/STOPPING InstructionsGuide BAR and Chain OIL Chain BrakeStopping Instructions Starting a Cold EngineStarting a Warm Engine Chain Brake Test Chain LubricationAutomatic Oiler Operating Instructions FellingBucking Using a Sawhorse LimbingBucking Maintenance and Repair Instructions Removing Guide BAR and Chain Replacing Guide BAR and ChainSAW Chain Tension Adjustment Fuel Filter Maintenance Requirements Check for Damaged or Worn PartsAIR Filter Check for Loose Fasteners and PartsSpark Arrester Screen Carburetor AdjustmentOIL Filter Spark PlugRemoving a Unit from Storage Guide BAR MaintenanceStoring a Chain SAW SAW Chain / BAR LubricationChain Maintenance Chain Replacement InformationInertia Chain Brake Action Troubleshooting Unit WON’T Start or Starts but will not RUNSpecifications EngineParts List Parts No DescriptionYour Warranty Rights and Obligations Owner’s Warranty ResponsibilitiesManufacturer’s Warranty Coverage

316350840 specifications

The Craftsman 316350840 is a powerful and versatile electric leaf blower designed to tackle the tough task of outdoor cleanup with ease and efficiency. This model stands out among its competitors, offering homeowners a practical solution for maintaining their yards and gardens. One of the key features of the Craftsman 316350840 is its robust motor, which provides ample airspeed and airflow to handle leaves, grass clippings, and debris with minimal effort. The unit boasts an impressive airspeed of up to 230 mph, allowing users to clear large areas quickly and effectively.

In addition to its powerful performance, the Craftsman 316350840 is designed with user comfort in mind. It features an ergonomic handle that minimizes fatigue during extended use, ensuring a comfortable grip even during long periods of operation. The lightweight design of the blower further enhances ease of use, making it easy to maneuver around trees, shrubs, and garden beds without straining the body.

The Craftsman 316350840 incorporates advanced technology to ensure reliable operation. Its electric motor means there are no gas emissions, making it an eco-friendly choice for environmentally conscious homeowners. This model also features a variable speed control, allowing users to adjust the airspeed according to the task at hand, whether it’s moving a few stray leaves or tackling a large pile of debris.

Moreover, the blower is designed for quick and easy assembly, enabling users to get started on their outdoor cleanup projects without unnecessary delay. The low-maintenance nature of the electric motor eliminates the need for oil changes or gasoline refills, offering convenience and savings in the long run.

Overall, the Craftsman 316350840 delivers a blend of power, comfort, and efficiency, making it an ideal choice for homeowners looking to maintain the beauty of their outdoor spaces. Its combination of an impressive airspeed, user-friendly design, and environmentally friendly technology ensures that it stands out as a reliable tool for all your yard cleanup needs. With this leaf blower in hand, tackling seasonal leaf fall and cleaning up your garden becomes a breeze.
Top Page Image Contents