Craftsman 316350840 manual SAW Chain Tension Adjustment

Page 17

MAINTENANCE AND REPAIR INSTRUCTIONS

SAW CHAIN TENSION ADJUSTMENT

WARNING: Always use protective gloves when handling

the saw chain.

Proper tension of saw chain is extremely important and must be checked before starting, as well as during any cutting operation.

Taking the time to make needed adjustments to the saw chain will result in improved cutting performance and pro- longed chain life.

To adjust the saw chain:

1.Loosen the bar retaining nut(s) (B, Fig. 27). Hold nose of guide bar up and turn adjustment screw (D) CLOCKWISE to increase chain tension. Turning screw COUNTERCLOCKWISE will decrease amount of ten- sion on chain. Ensure the chain fits snugly all the way around the guide bar (Fig. 28).

D

Fig. 28

2.After making adjustment, and while still holding nose of bar in the uppermost position, tighten the bar retaining nuts securely. Chain has proper tension when it has a snug fit all around and can be pulled around by gloved hand.

NOTE: If chain is difficult to rotate on guide bar or if it binds, too much tension has been applied. This requires minor adjustment as follows:

A.Loosen the bar retaining nuts so they are hand tight. Decrease tension by turning the bar adjustment screw COUNTERCLOCKWISE slowly. Move chain back and forth on bar. Continue to adjust until chain rotates freely, but fits snugly. Increase tension by turning bar adjustment screw CLOCKWISE.

B.When saw chain has proper tension, hold nose of bar in uppermost position and tighten the bar retaining nuts securely.

CAUTION: A new saw chain stretches, requiring

adjustment after as few as 5 cuts. This is normal with a new chain, and the interval between future adjustments will lengthen quickly.

CAUTION: If saw chain is TOO LOOSE or TOO

TIGHT, the sprocket, bar, chain, and crank- shaft bearings will wear more rapidly. Study Fig. 29 for information concerning correct cold tension (A), correct warm tension (B), and as a guide for when saw chain needs adjustment (C).

CHAIN BRAKE MECHANICAL TEST

WARNING: The purpose of the Chain Brake® is to reduce the possibility of injury due to kick-

back; however, it cannot provide the intend- ed measure of protection if the saw is oper- ated carelessly.

Always test the Chain Brake® before using your saw and periodically while on the job.

Your chain saw is equipped with a Chain Brake® that reduces possibility of injury due to kickback. The brake is activated if pressure is applied against brake lever when, as in the event of kickback, operator’s hand strikes the lever. When the brake is activated, chain movement stops abruptly.

To Test the Chain Brake®:

1.The Chain Brake® is DISENGAGED (chain can move) when BRAKE LEVER IS PULLED BACK AND LOCKED (A, Fig. 24).

2.The Chain Brake® is ENGAGED (chain is stopped) when brake lever is in forward position. You should not be able to move chain (B, Fig. 30).

NOTE: The brake lever should snap into both positions. If strong resistance is felt, or lever does not move into either position, do not use your saw. Take your saw to a Sears or other qualified service dealer.

A

B

A B C

Fig. 29

 

 

 

Fig. 30

17

 

 

 

 

 

 

 

 

 

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Operator’s Manual Warranty Statement Table of ContentsOperate Your SAW Safely Symbol MeaningRules for Safe Operation Handle Fuel with Caution Kickback Safety PrecautionsMaintain Your SAW in Good Working Order Fuel Safety Other Safety PrecautionsRead Operators Manual Safety Alert SymbolWear EYE, Hearing and Hardhat Protection Unleaded FuelChain SAW Components Safety FeaturesPinch Kickback Kickback SpecificsUsing Fuel Additives Using Blended FuelsOIL and Fuel Information OIL and Fuel Mixing InstructionsGuide BAR and Chain OIL STARTING/STOPPING InstructionsFueling the Engine Chain BrakeStarting a Warm Engine Stopping InstructionsStarting a Cold Engine Automatic Oiler Chain Brake TestChain Lubrication Felling Operating InstructionsBucking Bucking Using a SawhorseLimbing Maintenance and Repair Instructions Replacing Guide BAR and Chain Removing Guide BAR and ChainSAW Chain Tension Adjustment AIR Filter Maintenance Requirements Check for Damaged or Worn PartsFuel Filter Check for Loose Fasteners and PartsOIL Filter Carburetor AdjustmentSpark Arrester Screen Spark PlugStoring a Chain SAW Guide BAR MaintenanceRemoving a Unit from Storage SAW Chain / BAR LubricationInertia Chain Brake Action Chain MaintenanceChain Replacement Information Unit WON’T Start or Starts but will not RUN TroubleshootingEngine SpecificationsParts No Description Parts ListManufacturer’s Warranty Coverage Your Warranty Rights and ObligationsOwner’s Warranty Responsibilities

316350840 specifications

The Craftsman 316350840 is a powerful and versatile electric leaf blower designed to tackle the tough task of outdoor cleanup with ease and efficiency. This model stands out among its competitors, offering homeowners a practical solution for maintaining their yards and gardens. One of the key features of the Craftsman 316350840 is its robust motor, which provides ample airspeed and airflow to handle leaves, grass clippings, and debris with minimal effort. The unit boasts an impressive airspeed of up to 230 mph, allowing users to clear large areas quickly and effectively.

In addition to its powerful performance, the Craftsman 316350840 is designed with user comfort in mind. It features an ergonomic handle that minimizes fatigue during extended use, ensuring a comfortable grip even during long periods of operation. The lightweight design of the blower further enhances ease of use, making it easy to maneuver around trees, shrubs, and garden beds without straining the body.

The Craftsman 316350840 incorporates advanced technology to ensure reliable operation. Its electric motor means there are no gas emissions, making it an eco-friendly choice for environmentally conscious homeowners. This model also features a variable speed control, allowing users to adjust the airspeed according to the task at hand, whether it’s moving a few stray leaves or tackling a large pile of debris.

Moreover, the blower is designed for quick and easy assembly, enabling users to get started on their outdoor cleanup projects without unnecessary delay. The low-maintenance nature of the electric motor eliminates the need for oil changes or gasoline refills, offering convenience and savings in the long run.

Overall, the Craftsman 316350840 delivers a blend of power, comfort, and efficiency, making it an ideal choice for homeowners looking to maintain the beauty of their outdoor spaces. Its combination of an impressive airspeed, user-friendly design, and environmentally friendly technology ensures that it stands out as a reliable tool for all your yard cleanup needs. With this leaf blower in hand, tackling seasonal leaf fall and cleaning up your garden becomes a breeze.
Top Page Image Contents