Craftsman 316350840 manual OIL and Fuel Information, OIL and Fuel Mixing Instructions

Page 9

OIL AND FUEL INFORMATION

OIL AND FUEL MIXING INSTRUCTIONS

Old and/or improperly mixed fuel are the main reasons for the unit not running properly. Be sure to use fresh (less than 60 days old) clean unleaded fuel. Follow the instruc- tions carefully for the proper fuel/oil mixture.

Definition of Blended Fuels

Today's fuels are often a blend of gasoline and oxy- genates such as ethanol, methanol, or MTBE (ether). Alcohol-blended fuel absorbs water. As little as 1% water in the fuel can make fuel and oil separate and lead to for- mation of acids during storage. When using alcohol- blended fuel, use fresh fuel.

Using Blended Fuels

If you choose to use a blended fuel, or its use is unavoid- able, follow recommended precautions:

•Always use the fresh fuel mix explained in your opera- tor's manual

•Always shake the fuel mix before fueling the unit

•Drain the tank and run the engine dry before storing the unit

Using Fuel Additives

The bottle of 2-cycle oil that came with your unit contains a fuel additive which will help inhibit corrosion and mini- mize the formation of gum deposits. It is recommended that you use our 2-cycle oil with this unit.

If unavailable, use a good 2-cycle oil designed for air-cooled engines along with a fuel additive, such as STA-BIL®Gas Stabilizer or an equivalent. Add 0.8 oz.

(23 ml.) of fuel additive per gallon of fuel according to the instructions on the container. NEVER add fuel additives directly to the unit's fuel tank.

CAUTION: For proper engine operation and maxi-

mum reliability, pay strict attention to the oil and fuel mixing instructions on the 2-cycle oil container. Using improperly mixed fuel can severely damage the engine.

To Obtain Correct Fuel Mix:

Thoroughly mix the proper ratio of 2-cycle engine oil with unleaded gasoline in a separate fuel can. Use a 40:1 fuel/oil ratio. Do not mix them directly in the engine fuel tank. See the table below for specific gas and oil mixing ratios.

NOTE: One gallon (3.8 liters) of unleaded gasoline mixed with one 3.2 oz. (95 ml.) bottle of

2-cycle oil makes a 40:1 fuel/oil ratio.

 

 

 

 

 

 

 

 

 

 

 

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UNLEADED GAS

 

 

2 CYCLE OIL

 

 

 

 

1 GALLON US

 

 

3.2 FL. OZ.

 

(3.8 LITERS)

 

 

(95 ml)

 

 

 

 

 

 

 

 

1 LITER

 

 

25 ml

 

 

 

 

 

 

 

 

MIXING RATIO - 40:1

WARNING: Gasoline is extreme- ly flammable. Ignited

Vapors may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while filling the tank. Keep sparks and open flames at a distance from the area.

WARNING: Remove fuel cap slowly to avoid injury

from fuel spray. Never operate the unit without the fuel cap securely in place.

WARNING: Add fuel in a clean, well ventilated out-

door area. Wipe up any spilled fuel immedi- ately. Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapors dissipate.

NOTE: Dispose of the old fuel/oil mix in accordance to Federal, State and Local regulations.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operator’s Manual Warranty Statement Table of ContentsSymbol Meaning Rules for Safe OperationOperate Your SAW Safely Kickback Safety Precautions Maintain Your SAW in Good Working OrderHandle Fuel with Caution Fuel Safety Other Safety PrecautionsRead Operators Manual Safety Alert SymbolWear EYE, Hearing and Hardhat Protection Unleaded FuelChain SAW Components Safety FeaturesPinch Kickback Kickback SpecificsUsing Fuel Additives Using Blended FuelsOIL and Fuel Information OIL and Fuel Mixing InstructionsGuide BAR and Chain OIL STARTING/STOPPING InstructionsFueling the Engine Chain BrakeStopping Instructions Starting a Cold EngineStarting a Warm Engine Chain Brake Test Chain LubricationAutomatic Oiler Felling Operating InstructionsBucking Using a Sawhorse LimbingBucking Maintenance and Repair Instructions Replacing Guide BAR and Chain Removing Guide BAR and ChainSAW Chain Tension Adjustment AIR Filter Maintenance Requirements Check for Damaged or Worn PartsFuel Filter Check for Loose Fasteners and PartsOIL Filter Carburetor AdjustmentSpark Arrester Screen Spark PlugStoring a Chain SAW Guide BAR MaintenanceRemoving a Unit from Storage SAW Chain / BAR LubricationChain Maintenance Chain Replacement InformationInertia Chain Brake Action Unit WON’T Start or Starts but will not RUN TroubleshootingEngine SpecificationsParts No Description Parts ListYour Warranty Rights and Obligations Owner’s Warranty ResponsibilitiesManufacturer’s Warranty Coverage

316350840 specifications

The Craftsman 316350840 is a powerful and versatile electric leaf blower designed to tackle the tough task of outdoor cleanup with ease and efficiency. This model stands out among its competitors, offering homeowners a practical solution for maintaining their yards and gardens. One of the key features of the Craftsman 316350840 is its robust motor, which provides ample airspeed and airflow to handle leaves, grass clippings, and debris with minimal effort. The unit boasts an impressive airspeed of up to 230 mph, allowing users to clear large areas quickly and effectively.

In addition to its powerful performance, the Craftsman 316350840 is designed with user comfort in mind. It features an ergonomic handle that minimizes fatigue during extended use, ensuring a comfortable grip even during long periods of operation. The lightweight design of the blower further enhances ease of use, making it easy to maneuver around trees, shrubs, and garden beds without straining the body.

The Craftsman 316350840 incorporates advanced technology to ensure reliable operation. Its electric motor means there are no gas emissions, making it an eco-friendly choice for environmentally conscious homeowners. This model also features a variable speed control, allowing users to adjust the airspeed according to the task at hand, whether it’s moving a few stray leaves or tackling a large pile of debris.

Moreover, the blower is designed for quick and easy assembly, enabling users to get started on their outdoor cleanup projects without unnecessary delay. The low-maintenance nature of the electric motor eliminates the need for oil changes or gasoline refills, offering convenience and savings in the long run.

Overall, the Craftsman 316350840 delivers a blend of power, comfort, and efficiency, making it an ideal choice for homeowners looking to maintain the beauty of their outdoor spaces. Its combination of an impressive airspeed, user-friendly design, and environmentally friendly technology ensures that it stands out as a reliable tool for all your yard cleanup needs. With this leaf blower in hand, tackling seasonal leaf fall and cleaning up your garden becomes a breeze.
Top Page Image Contents