Operating Manual
Operation
The srr.rrrr is a number from
Note: It is assumed that the DAC output and oscillator control are linear. If not, then the oscillator control range should be extrapolated from a subset of the control curve that is near zero frequency error.
Response Format:
Design Verify On/Off
Command Format:
Description:
Determines whether filtered rate or filter offset is returned in a status request. When x = 0, the extra data is not included. When x = 1, the extra data is included.
The response to the status command is changed to the following:
Frr.rrrrrr - Filtered rate in microseconds; rr.rrrrrr is the an average frequency rate error calculated internally by the unit. This is one of the values used by the program to determine the dynamic gain.
Oyyyyyy.yyy - Filtered offset in microseconds; yyyyyy.yyy is the an average time error calculated internally by the unit. This is one of the values used by the program to determine the dynamic gain.
Response Format:
PN | 23 |