Weed Eater 530163993 Double Insulation CONSTRUC- Tion, UNIT/MAINTENANCE Safety, Power source

Page 3

fences, or pipes, to avoid the possibility of electric shock. Don’t handle plug or unit with wet hands.

DDo not use with damaged cord or plug. If unit is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an autho-

rized service dealer for repair.

D Ground Fault Circuit Interrupter (GFCI) protection should be provided on the cir- cuit or outlet to be used for this unit. Re- ceptacles are available having built-in GFCI protection and may be used for this measure of safety.

D Keep others including children, animals, bystanders, and helpers a minimum of 30 feet (10 meters) away. Stop the motor im- mediately if you are approached. Do not allow the unit to be used as a toy.

DOUBLE INSULATION CONSTRUC- TION

Your unit is double insulated to help pro- tect against electric shock. Double insula- tion construction consists of two separate “layers” of electrical insulation instead of grounding. Tools and appliances built with a double insulation system are not in- tended to be grounded. No grounding means is provided on this unit, nor should a means for grounding be added to this unit. As a result, the extension cord used with your unit can be plugged into any standard 120 volt electrical outlet.

Safety precautions must be observed when operating any electrical tool. The double in- sulation system only provides added pro- tection against injury resulting from an inter- nal electrical insulation failure.

WARNING: All electrical repairs to this unit, including housing, switch, motor, etc., must be diagnosed and repaired by an authorized service dealer. Replace- ment parts for a double insulated appliance must be identical to the parts they replace. A double insulated appliance is marked with the words “DOUBLE INSULATION” or “DOUBLE INSU- LATED.” The symbol (square within a square) may also be marked on the ap- pliance. Failure to have the unit repaired by an authorized service dealer can cause the double insulation construction to become ineffective and result in seri- ous injury.

UNIT/MAINTENANCE SAFETY

DTurn off all controls and allow the motor to stop before disconnecting the unit from

the power source.

D Disconnect the unit from the power source when not in use. Do not leave the unit when it is plugged into an outlet.

3

DDo not set the unit on any surface except a clean, hard area while the unit is run- ning. Debris such as gravel, sand, dust, grass, etc., could be picked up by the air intake and thrown out through the dis- charge opening, damaging the unit, prop- erty, or causing serious injury to bystand-

ers or operator.

D Do not overreach or use from unstable surfaces such as ladders, trees, steep slopes, rooftops, etc. Use extra care when cleaning on stairways. Keep firm footing and balance at all times. Keeps hands out of tubes.

DInspect the entire unit before each use for worn, loose, missing, or damaged parts. Do not use until the unit is in proper work- ing order.

D Disconnect unit from power source be- fore servicing, cleaning, performing main- tenance, or storing.

D This unit is double insulated. See the

DOUBLE INSULATION CONSTRUCTION

section. Have all internal service per- formed by qualified service repair person- nel to avoid creating a hazard or voiding your warranty.

DHave all maintenance other than the rec- ommended procedures described in the

instruction manual performed by an au- thorized service dealer.

DAlways see an authorized service dealer to replace a damaged impeller. Parts that are chipped, cracked, broken, or dam-

aged in any other way can fly apart and cause serious injury. Replace damaged parts before using the unit.

D Never place any object in the air intake opening as this could restrict proper air flow and cause damage to the unit.

DNever douse the unit with water or other liquids or squirt with a water hose. Clean with a damp sponge and mild soap. See

STORAGE.

DCheck air intake openings and tubes fre- quently, always with the unit stopped and power source disconnected. Keep vents and tubes free from debris which can ac-

cumulate and restrict proper air flow.

D Do not burn, incinerate, or expose this unit to extreme heat.

DStore the unit unplugged in a high, cool, dry, indoor area out of the reach of chil- dren.

D Use only recommended attachments and replacement parts to avoid creating a hazard and/or voiding your warranty.

D Maintain the unit according to recom- mended procedures.

DUse only for jobs explained in this man- ual.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Manual de Instrucciones Manuel d’Instructions Pulling on cord. To unplug, grasp the plug, not the cord Operator SafetyElectrical Safety This manualUNIT/MAINTENANCE Safety Power sourceDouble Insulation CONSTRUC- Tion Standards Blower SafetyUse only in daylight or in good artificial light Cue pits, ashtrays, etcEnsure unit is stopped and extension cord is unplugged Blower Assembly Attaching the Blower Tube and NozzleVacuum Assembly Remove the Inlet RestrictorAmp Rating 25 ft 50 ft More Not More Volts Than Adjusting the Shoulder Strap on the Collection BAGHOW to Convert Unit from Vacuum USE to Blower USE Select AN Extension CordUsing Your Unit AS a Blower Using Your Unit AS a VacuumALL Other Models Operating Position Check for Loose Fasteners and Parts Inspect and Clean Unit & LabelsHOW to Remove AN Object from the AIR Intake General RecommendationsElectrolux Home Products Troubleshooting TableAccessories Available Symptom Cause Remedy

530163993 specifications

The Weed Eater 530163993 is a standout model in the line of outdoor power equipment, perfectly designed for homeowners and landscaping professionals alike. This versatile tool offers exceptional performance, making lawn maintenance easier and more efficient.

One of the primary features of the Weed Eater 530163993 is its lightweight construction. This design allows users to maneuver the unit with ease, reducing fatigue during long gardening sessions. Moreover, its compact design makes it simple to store when not in use, taking up minimal space in sheds or garages.

The Weed Eater also incorporates a powerful engine, providing ample power for a variety of trimming tasks. Equipped with a reliable gas engine, this unit ensures consistent performance, even in tough landscaping conditions. The high RPM capability allows for quicker cutting, making it an ideal choice for those with larger areas to maintain.

In terms of technology, the Weed Eater 530163993 features an innovative bump head that allows for easy line advancement. Users can simply tap the head on the ground to release more line without interruption, making it incredibly user-friendly. This technology improves workflow and helps maintain a tidy, well-groomed appearance in lawns and gardens.

Durability is a significant aspect of the Weed Eater 530163993, with a tough construction designed to withstand the rigors of regular use. The equipment is built to last, featuring quality materials that can handle the challenges of outdoor work, from brush cutting to clearing overgrown grass.

Additionally, the Weed Eater is designed for easy maintenance, featuring a straightforward fuel system that simplifies refueling and reduces downtime. The air filter is easily accessible, allowing for quick cleaning or replacement, which keeps the engine operating smoothly.

Overall, the Weed Eater 530163993 embodies efficiency, power, and user-friendly technology, making it a remarkable choice for anyone looking to maintain their outdoor space. With its combination of lightweight design, powerful engine, and easy-to-use features, this tool promises to deliver a top-notch performance that meets various trimming needs. Whether you are a seasoned landscaper or a homeowner handling routine yard work, the Weed Eater 530163993 is an invaluable addition to your gardening arsenal.
Top Page Image Contents