Weed Eater 530163993 Blower Assembly Attaching the Blower Tube and Nozzle, Vacuum Assembly

Page 5

BLOWER ASSEMBLY

NOTE: Assembly intructions for using your unit as a vacuum follow this section.

ATTACHING THE BLOWER TUBE AND NOZZLE

1.Insert the blower tube into the blower outlet.

2.Twist the blower tube clockwise until it is firmly seated in the blower outlet.

3.Twist the nozzle into the end of the blower tube until it is firmly seated. Make sure the nozzle points upward.

Blower outlet

Blower Tube Nozzle

For Model 2695 only, the blower exten- sion tube and nozzle are combined into one component.

Blower Tube/Nozzle

VACUUM ASSEMBLY

(Some models)

NOTE: Assembly instructions for using your unit as a blower are explained in the previous section.

If you have already assembled your unit for use as a blower, remove the blower tube and nozzle.

REMOVE THE INLET RESTRICTOR

An inlet restrictor is used when using your unit as a blower. This restrictor is not used during vacuum use and must be removed during assembly for vacuum use.

NOTE: Be sure to keep the inlet restrictor for using your unit as a blower.

1.Ensure unit is stopped and extension cord is unplugged.

2.Open the inlet cover by inserting the tip of a screwdriver into the latch area on the vacuum inlet cover. Gently tilt handle of screwdriver toward the front of the unit while pulling up on the vacu- um inlet cover with your other hand.

Vacuum Inlet Cover

Latch Area

 

Impeller

5

3.Turn the inlet restrictor counterclock- wise and remove it from the unit. Do not close the inlet door. You will next attach the vacuum tubes.

Vacuum

Inlet Cover

Inlet

Restrictor

ATTACHING THE VACUUM TUBES There are 2 vacuum tubes, an upper and lower tube. The upper tube is cut straight on both ends and attaches to the blower unit. The lower tube attaches to the upper tube, and has an angled end that you point to- ward the ground during vacuum use.

1.Ensure unit is stopped and extension cord is unplugged.

2.Locate the arrows on the upper vacu- um tube and on the vacuum inlet area of the unit.

Upper Vacuum Tube

3.While holding the inlet cover open, align the arrows and insert the vacu- um tube into the opening. Twist the tube clockwise until it is seated. A se- cond arrow on the vacuum tube will align with the arrow on the unit once the tube is twisted completely into place.

Align arrows on tube and unit

4.To attach the lower vacuum tube to the upper vacuum tube, first align the ar- rows on the two tubes. Then, press the two tubes together until the lower tube is securely seated in the upper tube (about 3 inches).

Upper Tube

Lower Tube

ATTACH THE COLLECTION BAG

Slide the opening of the collection bag over the blower outlet. Pull the velcro strap tightly through the buckle and se- cure to the velcro tabs.

Image 5
Contents Manual de Instrucciones Manuel d’Instructions Electrical Safety Operator SafetyThis manual Pulling on cord. To unplug, grasp the plug, not the cordDouble Insulation CONSTRUC- Tion UNIT/MAINTENANCE SafetyPower source Use only in daylight or in good artificial light Blower SafetyCue pits, ashtrays, etc StandardsVacuum Assembly Blower Assembly Attaching the Blower Tube and NozzleRemove the Inlet Restrictor Ensure unit is stopped and extension cord is unpluggedHOW to Convert Unit from Vacuum USE to Blower USE Adjusting the Shoulder Strap on the Collection BAGSelect AN Extension Cord Amp Rating 25 ft 50 ft More Not More Volts ThanALL Other Models Operating Position Using Your Unit AS a BlowerUsing Your Unit AS a Vacuum HOW to Remove AN Object from the AIR Intake Inspect and Clean Unit & LabelsGeneral Recommendations Check for Loose Fasteners and PartsAccessories Available Troubleshooting TableSymptom Cause Remedy Electrolux Home Products

530163993 specifications

The Weed Eater 530163993 is a standout model in the line of outdoor power equipment, perfectly designed for homeowners and landscaping professionals alike. This versatile tool offers exceptional performance, making lawn maintenance easier and more efficient.

One of the primary features of the Weed Eater 530163993 is its lightweight construction. This design allows users to maneuver the unit with ease, reducing fatigue during long gardening sessions. Moreover, its compact design makes it simple to store when not in use, taking up minimal space in sheds or garages.

The Weed Eater also incorporates a powerful engine, providing ample power for a variety of trimming tasks. Equipped with a reliable gas engine, this unit ensures consistent performance, even in tough landscaping conditions. The high RPM capability allows for quicker cutting, making it an ideal choice for those with larger areas to maintain.

In terms of technology, the Weed Eater 530163993 features an innovative bump head that allows for easy line advancement. Users can simply tap the head on the ground to release more line without interruption, making it incredibly user-friendly. This technology improves workflow and helps maintain a tidy, well-groomed appearance in lawns and gardens.

Durability is a significant aspect of the Weed Eater 530163993, with a tough construction designed to withstand the rigors of regular use. The equipment is built to last, featuring quality materials that can handle the challenges of outdoor work, from brush cutting to clearing overgrown grass.

Additionally, the Weed Eater is designed for easy maintenance, featuring a straightforward fuel system that simplifies refueling and reduces downtime. The air filter is easily accessible, allowing for quick cleaning or replacement, which keeps the engine operating smoothly.

Overall, the Weed Eater 530163993 embodies efficiency, power, and user-friendly technology, making it a remarkable choice for anyone looking to maintain their outdoor space. With its combination of lightweight design, powerful engine, and easy-to-use features, this tool promises to deliver a top-notch performance that meets various trimming needs. Whether you are a seasoned landscaper or a homeowner handling routine yard work, the Weed Eater 530163993 is an invaluable addition to your gardening arsenal.