Weed Eater 530163993 Blower Safety, Use only in daylight or in good artificial light, Standards

Page 4

BLOWER SAFETY

D Use only in daylight or in good artificial light.

D Inspect the area before using the unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can rico- chet, be thrown, or otherwise cause injury or damage during operation.

D Avoid accidental starting. Be sure the switch is in the OFF position and keep your hand and fingers away from the switch while connecting the unit to the power source or when carrying a unit connected to the power source.

D Never run the unit without the proper equipment attached. When used as a blower, always install a blower tube. Use only recommended attachments. Do not use with any opening blocked, Keep free from dust, lint, hair and anything that may reduce air flow.

DTo avoid spreading fire, do not use blower near leaf or brush fires, fireplaces, barbe-

cue pits, ashtrays, etc.

D Never place objects inside the blower tubes; always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to rico- chet which can hurt people or animals, break glass, or cause other damage.

DNever use for spreading chemicals, fertil- izers, or any other substances which may contain toxic materials.

VACUUM SAFETY (If applicable)

DStop the motor and disconnect the power source before opening the air inlet door or attempting to insert or remove the vacu- um tubes. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades.

DHard objects can be thrown through the collection bag or the housing and be- come dangerous missiles which can

DWhen using the vacuum attachment, the unit is designed to pick up dry material such as leaves, grass, small twigs, and bits of paper. Do not vacuum stones, gravel, metal, broken glass, etc., to avoid severe damage to the impeller. To avoid the possibility of electrical shock, do not

attempt to vacuum water or other liquids. D Never run the unit without the proper equipment attached. When used as a vacuum, always install vacuum tubes and collection bag assembly. Make sure the collection bag assembly is completely zipped when unit is running to avoid flying debris. Use only recom-

mended attachments.

DAvoid situations which could set the col- lection bag on fire. Do not vacuum dis- carded matches, cigars, cigarettes, or ash from fireplaces, barbecue pits, brush piles, etc. To avoid spreading fire, do not use blower near leaf or brush fires, fire- places, barbecue pits, ashtrays, etc.

DAlways use collection bag shoulder strap when vacuuming to avoid loss of control.

D Check air intake openings, elbow tube, and vacuum tubes frequently, always with the unit stopped and the power source disconnected. Keep vents and tubes free of debris which can accumu- late and restrict proper air flow. Do not use with any opening blocked. Keep free of dust, lint, hair and anything that may re- duce air flow.

STANDARDS

This product is listed by Underwriter’s Lab- oratories, Inc., in accordance with UL Stan- dard 1017.

If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your autho- rized service dealer or call 1-800-554-6723. Failure to follow all Safety Rules and Pre- cautions can result in serious injury.

cause serious injury to operator or others.

SAVE THESE INSTRUCTIONS

WARNING: Stop the unit and dis- connect from the power source before opening the inlet cover or attempting to in- sert or remove the inlet restrictor, blower tube, nozzle, or vacuum tubes. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades.

4

WARNING: If you receive your unit assembled, check each step to in- sure your unit is properly assembled and all fasteners are secure. Follow all safety information in the manual and on unit.

S A standard screwdriver is required for assembly.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Manual de Instrucciones Manuel d’Instructions Operator Safety Electrical SafetyThis manual Pulling on cord. To unplug, grasp the plug, not the cordPower source UNIT/MAINTENANCE SafetyDouble Insulation CONSTRUC- Tion Blower Safety Use only in daylight or in good artificial lightCue pits, ashtrays, etc StandardsBlower Assembly Attaching the Blower Tube and Nozzle Vacuum AssemblyRemove the Inlet Restrictor Ensure unit is stopped and extension cord is unpluggedAdjusting the Shoulder Strap on the Collection BAG HOW to Convert Unit from Vacuum USE to Blower USESelect AN Extension Cord Amp Rating 25 ft 50 ft More Not More Volts ThanUsing Your Unit AS a Vacuum Using Your Unit AS a BlowerALL Other Models Operating Position Inspect and Clean Unit & Labels HOW to Remove AN Object from the AIR IntakeGeneral Recommendations Check for Loose Fasteners and PartsTroubleshooting Table Accessories AvailableSymptom Cause Remedy Electrolux Home Products

530163993 specifications

The Weed Eater 530163993 is a standout model in the line of outdoor power equipment, perfectly designed for homeowners and landscaping professionals alike. This versatile tool offers exceptional performance, making lawn maintenance easier and more efficient.

One of the primary features of the Weed Eater 530163993 is its lightweight construction. This design allows users to maneuver the unit with ease, reducing fatigue during long gardening sessions. Moreover, its compact design makes it simple to store when not in use, taking up minimal space in sheds or garages.

The Weed Eater also incorporates a powerful engine, providing ample power for a variety of trimming tasks. Equipped with a reliable gas engine, this unit ensures consistent performance, even in tough landscaping conditions. The high RPM capability allows for quicker cutting, making it an ideal choice for those with larger areas to maintain.

In terms of technology, the Weed Eater 530163993 features an innovative bump head that allows for easy line advancement. Users can simply tap the head on the ground to release more line without interruption, making it incredibly user-friendly. This technology improves workflow and helps maintain a tidy, well-groomed appearance in lawns and gardens.

Durability is a significant aspect of the Weed Eater 530163993, with a tough construction designed to withstand the rigors of regular use. The equipment is built to last, featuring quality materials that can handle the challenges of outdoor work, from brush cutting to clearing overgrown grass.

Additionally, the Weed Eater is designed for easy maintenance, featuring a straightforward fuel system that simplifies refueling and reduces downtime. The air filter is easily accessible, allowing for quick cleaning or replacement, which keeps the engine operating smoothly.

Overall, the Weed Eater 530163993 embodies efficiency, power, and user-friendly technology, making it a remarkable choice for anyone looking to maintain their outdoor space. With its combination of lightweight design, powerful engine, and easy-to-use features, this tool promises to deliver a top-notch performance that meets various trimming needs. Whether you are a seasoned landscaper or a homeowner handling routine yard work, the Weed Eater 530163993 is an invaluable addition to your gardening arsenal.
Top Page Image Contents