Direct air flow by directing the blower tube/ nozzle down or to one side. Always work away from solid objects such as walks, large stones, vehicles, and fences.
Clean corners by starting in corners and moving outward. This will help prevent an accumulation of debris which could fly into your face.
Be careful when working near plants. The force of the air could damage tender plants.
USING YOUR UNIT AS A VACUUM
WARNING: Do not vacuum stones, gravel, metal, broken glass, etc., to avoid severe damage to the impeller. To avoid the possibility of electrical shock, do not attempt to vacuum water or other liquids.
Use your unit as a vacuum to pick up dry material such as leaves, grass, small twigs, and bits of paper.
DFor best results during vacuum use, op- erate your unit at high speed.
D Move slowly back and forth over the material as you vacuum. Avoid forcing the unit into a pile of debris as this can clog the unit.
D Keep the vacuum tube about an inch above the ground for best results.
WARNING: If the unit becomes clogged, stop the unit and unplug the ex- tension cord. Wait until the impeller has completely stopped turning, then remove the vacuum tubes. Carefully reach into the vacuum opening and clear out the clogged debris.
WARNING: Disconnect power source before performing maintenance.
GENERAL RECOMMENDATIONS
The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must main- tain unit as instructed in this manual. Vari- ous adjustments will need to be made peri- odically to properly maintain your unit.
BEFORE EACH USE
CHECK FOR LOOSE FASTENERS AND PARTS
SInlet Cover S Blower Tube
S Vacuum Tubes S Collection Bag
CHECK FOR DAMAGED OR
WORN PARTS
Contact an authorized service dealer for replacement of damaged or worn parts.
SON/OFF Switch
start motor and continue.
SInlet Cover
AFTER EACH USE
INSPECT AND CLEAN UNIT & LABELS
Stop unit and unplug extension cord.
SAfter each use, inspect complete unit for loose or damaged parts. Clean the unit
using a damp cloth with a mild detergent.
SWipe off unit with a clean dry cloth.
CLEAN COLLECTION BAG
IMPORTANT: THE COLLECTION BAG MUST BE PROPERLY EMPTIED.
D You must properly empty and maintain the collection bag to avoid deterioration and obstruction of air flow.
DRemove the collection bag from the unit and empty after each use. Do not store bag without emptying the bag of all con-
tents (grass, leaves, etc.).
DWash the bag once a year. Remove the bag from the blower and turn the bag in- side out. Wash the bag with a water hose. Allow the bag to hang and dry completely before you reuse the bag.
HOW TO REMOVE AN OBJECT FROM THE AIR INTAKE
WARNING: Stop the unit and dis- connect from the power source before opening the inlet cover. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades.
SWhile holding the inlet cover open, re- move the vacuum tubes. The inlet cov- er must be held open through all re-
maining steps.
SCarefully reach into the vacuum open- ing and clear out the air intake area.
Clear all debris from impeller.
S Inspect the impeller for cracks. If cracked or damaged, do not use the unit. Have parts replaced by your au- thorized service dealer. Do not attempt to replace them yourself.
7