Starting a Flooded Engine, Clean AIR Filter

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

SMove the choke lever to the RUN position. S Move throttle lever to the position.

S Pull rope to clear engine of excess fuel. This could require pulling the starter rope many times.

If unit still doesn’t start, call 1-800-554-6723.

WARNING: Avoid touching muffler

CLEAN AIR FILTER

Air Filter

Cover

unless engine and muffler are cold. A hot muffler can cause serious burns.

Air Filter

Screws

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury. Always disconnect the spark plug before performing maintenance or ac- cessing movable parts.

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instruct-ed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws S Muffler

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S Fuel Tank -- Do not use unit if fuel tank shows signs of damage or leaks.

S Vacuum Bag -- Do not use vacuum bag if it is torn or damaged.

INSPECT AND CLEAN UNIT AND DECALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

S Wipe off unit with a clean dry cloth.

Cleaning the air filter:

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean or replace air filter after every 5 hours of operation or yearly, whichever comes first.

SClean the cover and the area around it to keep debris from falling into the carburetor

chamber when the cover is removed.

SRemove parts as illustrated.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

SWash the filter in soap and water. S Allow filter to dry.

S Apply a few drops of oil to the filter; squeeze filter to distribute oil.

S Replace parts.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed, nonadjustable.

S Twist, then pull off spark plug boot.

S Remove spark plug from cylinder and dis- card.

S Replace with Champion RCJ-6Y spark plug and tighten with a 3/4 in. socket wrench (15 - 20 ft/lbs).

S Reinstall the spark plug boot.

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Line

Fuel Filter

-- 6 --

530086692 specifications

The Weed Eater 530086692 is a standout model in the realm of outdoor power equipment, specifically designed for homeowners and gardening enthusiasts who crave both efficiency and versatility in their landscaping tools. This product embodies innovation and practicality, making the daunting task of yard care manageable and even enjoyable.

One of the standout features of the Weed Eater 530086692 is its powerful engine. The tool is equipped with a reliable and robust power source that allows it to tackle tough vegetation and overgrown areas with ease. The engine’s efficiency not only provides a longer run time but also ensures that users can complete their tasks without frequent interruptions for refueling.

Another notable characteristic of this weed eater is its lightweight design. Weighing in at just a few pounds, it is easily maneuverable, allowing users to navigate tight spaces and difficult terrains without straining their bodies. This feature is particularly beneficial for extended use, reducing user fatigue during long mowing sessions.

The Weed Eater 530086692 also boasts a user-friendly no-tool line replacement system. This technology simplifies the process of changing the cutting line, allowing users to quickly swap out the spool when necessary. This convenience is especially important for maintaining productivity, as it minimizes downtime during yard work.

Additionally, this model features an innovative 2-in-1 head, providing users with the versatility of both trimming and edging capabilities. The ability to switch between functions makes the Weed Eater 530086692 an all-in-one solution for lawn care, ensuring users can achieve a professional-looking finish with minimal effort.

In terms of durability, the Weed Eater 530086692 is built to last. It incorporates high-quality materials in its construction to withstand the rigors of regular use. This durability is complemented by the machine's easy-to-use design, with straightforward controls that make it accessible for users of all skill levels, from novices to seasoned garden warriors.

Safety is also a priority in the design of the Weed Eater 530086692. It includes features such as a protective guard that shields users from debris while maintaining optimal visibility, ensuring a safer mowing experience.

Overall, the Weed Eater 530086692 integrates cutting-edge technology with practical features, making it an indispensable tool for anyone looking to maintain a neat and tidy yard. Whether users need to tackle tough weeds or do some light trimming, this weed eater offers the performance and reliability required to get the job done efficiently. With its combination of power, ease of use, and durability, the Weed Eater 530086692 is a worthwhile investment for maintaining any home landscape.