Weed Eater 530086692 Check Muffler Mounting Screws, Inspect Muffler and Spark Arresting Screen

Page 7

CHECK MUFFLER MOUNTING SCREWS

Once each year, ensure muffler mounting screws are secure and tightened properly to prevent damage.

Cap Screws

Muffler Cover

Mounting

Screw Holes

NOTE: The muffler mounting screws are lo- cated behind the cap screws. The cap screws must be removed to access the mounting screws.

SRemove muffler cover.

SLoosen and remove the 2 cap screws from

the muffler mounting screw holes.

STighten the 2 mounting screws (100 in/lbs). S Reinstall and tighten the 2 cap screws (100

in/lbs).

S Reinstall muffler cover.

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As the unit is used, carbon deposits build up on the muffler and spark arresting screen, and must be removed to avoid creating a fire hazard or affecting engine performance.

TOP VIEW OF MUFFLER

Exhaust

Diverter

Screws

Replace the spark arresting screen every 50 hours of operation or if any damage or breaks in the screen are noted.

NOTE: Do not attempt to clean the spark ar- resting screen.

SRemove muffler cover.

SLoosen and remove both screws from the

exhaust diverter.

SRemove the exhaust diverter and spark ar- resting screen.

SInstall new spark arresting screen.

SReinstall exhaust diverter and both screws.

Tighten screws securely.

SReinstall muffler cover.

NOTE: If any part of the muffler is cracked, broken or damaged, we recommend that the muffler be replaced.

We recommend all service and adjustments not listed in this manual be performed by an authorized service dealer.

CARBURETOR ADJUSTMENTS

Your carburetor is equipped with limiter caps. Adjusting the carburetor is a complicated task. We recommend that you take your unit to an an authorized service dealer. Damage will occur if you turn the needles beyond the limiter stops.

WARNING: Perform the following steps after each use:

S Allow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area

where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

NEED ASSISTANCE?

Call: 1-800-554-6723.

NEED A SERVICE PART?

Contact your dealer.

-- 7 --

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions Operate Your Unit Safely Know Your UnitPlan Ahead Handle Fuel with CAUTION, IT is Highly FlammableAshtrays, etc Use only for jobs explained in this manual Blower Tube AssemblyVacuum BAG Assembly Maintain Your Unit ProperlyOperating Position Vacuum Tube AssemblyOperating Tips Blower Vacuum To Stop the EngineBefore Starting the Engine Starting a Warm EngineGeneral Recommendations Clean AIR FilterInspect and Clean Unit and Decals Starting a Flooded EngineInspect Muffler and Spark Arresting Screen Carburetor AdjustmentsNeed a Service PART? Check Muffler Mounting ScrewsReplace screen Troubleshooting Table Cause RemedyConsequential Damages Poulan

530086692 specifications

The Weed Eater 530086692 is a standout model in the realm of outdoor power equipment, specifically designed for homeowners and gardening enthusiasts who crave both efficiency and versatility in their landscaping tools. This product embodies innovation and practicality, making the daunting task of yard care manageable and even enjoyable.

One of the standout features of the Weed Eater 530086692 is its powerful engine. The tool is equipped with a reliable and robust power source that allows it to tackle tough vegetation and overgrown areas with ease. The engine’s efficiency not only provides a longer run time but also ensures that users can complete their tasks without frequent interruptions for refueling.

Another notable characteristic of this weed eater is its lightweight design. Weighing in at just a few pounds, it is easily maneuverable, allowing users to navigate tight spaces and difficult terrains without straining their bodies. This feature is particularly beneficial for extended use, reducing user fatigue during long mowing sessions.

The Weed Eater 530086692 also boasts a user-friendly no-tool line replacement system. This technology simplifies the process of changing the cutting line, allowing users to quickly swap out the spool when necessary. This convenience is especially important for maintaining productivity, as it minimizes downtime during yard work.

Additionally, this model features an innovative 2-in-1 head, providing users with the versatility of both trimming and edging capabilities. The ability to switch between functions makes the Weed Eater 530086692 an all-in-one solution for lawn care, ensuring users can achieve a professional-looking finish with minimal effort.

In terms of durability, the Weed Eater 530086692 is built to last. It incorporates high-quality materials in its construction to withstand the rigors of regular use. This durability is complemented by the machine's easy-to-use design, with straightforward controls that make it accessible for users of all skill levels, from novices to seasoned garden warriors.

Safety is also a priority in the design of the Weed Eater 530086692. It includes features such as a protective guard that shields users from debris while maintaining optimal visibility, ensuring a safer mowing experience.

Overall, the Weed Eater 530086692 integrates cutting-edge technology with practical features, making it an indispensable tool for anyone looking to maintain a neat and tidy yard. Whether users need to tackle tough weeds or do some light trimming, this weed eater offers the performance and reliability required to get the job done efficiently. With its combination of power, ease of use, and durability, the Weed Eater 530086692 is a worthwhile investment for maintaining any home landscape.
Top Page Image Contents