Weed Eater 530086922 Check for Loose Fasteners and Parts, Check for Damaged or Worn Parts

Page 7

SWEEPING -- The fanning action of the rotat- Sweeping ing line can be used for a quick and easy

clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/STOP Switch -- Ensure ON/STOP switch functions properly by pushing and releasing the switch. Make sure engine stops. Wait 5 seconds before attempting to restart unit to allow switch to reset. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1. Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2. Remove parts as illustrated.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze the filter to distribute oil.

6.Replace parts.

Air Filter

Screws

Air Filter

Cover

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions Unit / Maintenance Safety Operator SafetyFuel Safety Attaching Shield Cutting SafetyAdjusting the Handle Transporting and StoragePrimer Bulb ON/STOP Switch ChokeHOW to Stop Your Unit Know Your TrimmerStarting a Flooded Engine HOW to Start Your UnitSwitch Starting a Warm EngineCutting Methods Trimmer Line AdvanceCheck for Damaged or Worn Parts Inspect and Clean Unit and LabelsClean AIR Filter Check for Loose Fasteners and PartsFuel System Line ReplacementCarburetor Adjustment Seasonal StorageTroubleshooting Table Cause Remedy Agency and POULAN/WEED EATER, Divi

530086922 specifications

The Weed Eater 530086922 is a powerful and efficient string trimmer designed for homeowners and gardening enthusiasts looking for a reliable tool to maintain their lawns and gardens. With its robust features and user-friendly design, this tool makes yard work easier and more effective.

One of the standout features of the Weed Eater 530086922 is its lightweight and ergonomic design. Weighing in at just over 10 pounds, it is easy to maneuver, allowing users to tackle even the most challenging terrains without feeling fatigued. The adjustable handle provides comfort and reduces strain during extended use, making it ideal for those who spend a lot of time maintaining their outdoor spaces.

The trimmer is equipped with a powerful 25cc two-cycle engine that delivers impressive cutting performance. This engine allows the Weed Eater 530086922 to efficiently slice through tall grass, tough weeds, and overgrown brush, making it suitable for various landscaping tasks. Its easy-start technology minimizes pull effort, ensuring that users can start the trimmer with minimal hassle.

The 530086922 features a dual-line bump feed head that allows for quick and easy replacement of trimmer line. This method ensures uninterrupted trimming, saving time and increasing productivity. The adjustable cutting width provides flexibility, enabling users to switch between a wider cut for quick jobs and a narrower cut for precision work around flower beds and trees.

Another significant aspect of the Weed Eater 530086922 is its limited emission technology. Designed with environmental concerns in mind, it operates efficiently while minimizing harmful emissions. This commitment to reducing the environmental impact makes it a responsible choice for the eco-conscious gardener.

Durability is another characteristic that stands out in the Weed Eater 530086922. Constructed with high-quality materials, it is built to withstand the rigors of outdoor use. The trimmer is also designed for easy maintenance, ensuring it can be kept in excellent working condition with minimal effort.

In summary, the Weed Eater 530086922 is an exceptional string trimmer that combines power, efficiency, and ease of use. With its lightweight design, reliable engine, adjustable features, and eco-friendly technology, it is an excellent addition to any homeowner's landscaping toolkit. Whether you're maintaining your lawn or tackling overgrown areas, this trimmer is engineered to meet your gardening needs effectively.
Top Page Image Contents