Line Replacement, Carburetor Adjustment

LINE REPLACEMENT

1.Remove spool by firmly pulling on tap button.

2.Clean entire surface of hub and spool.

3.Replace with a pre-wound spool, or cut two lengths of 12-1/2feet of 0.080! (2 mm) diam- eter Weed Eaterr brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert ends of the lines about 1/2 inch (1 cm) into the small holes on the inside of spool.

Spool

Small

Holes

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

6.Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the exit holes in the hub as shown in the illustration.

8.Align the notches with the line exit holes.

9.Push spool into hub until it snaps into place. 10.Pull the lines extending outside of the hub to

release the lines from the notches.

CARBURETOR ADJUSTMENT

Your carburetor is equipped with limiter caps. Carburetor adjustment is a complicated task. We recommend that you take your unit to an authorized service dealer. Damage will occur if you turn the needles beyond the limiter stops.

Line exit holes					Line in Notch

Line in Notch Hub

WARNING: Perform the following steps after each use:

S Allow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom- mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

S Replace your gasoline can if it starts to rust.

530086922 specifications

The Weed Eater 530086922 is a powerful and efficient string trimmer designed for homeowners and gardening enthusiasts looking for a reliable tool to maintain their lawns and gardens. With its robust features and user-friendly design, this tool makes yard work easier and more effective.

One of the standout features of the Weed Eater 530086922 is its lightweight and ergonomic design. Weighing in at just over 10 pounds, it is easy to maneuver, allowing users to tackle even the most challenging terrains without feeling fatigued. The adjustable handle provides comfort and reduces strain during extended use, making it ideal for those who spend a lot of time maintaining their outdoor spaces.

The trimmer is equipped with a powerful 25cc two-cycle engine that delivers impressive cutting performance. This engine allows the Weed Eater 530086922 to efficiently slice through tall grass, tough weeds, and overgrown brush, making it suitable for various landscaping tasks. Its easy-start technology minimizes pull effort, ensuring that users can start the trimmer with minimal hassle.

The 530086922 features a dual-line bump feed head that allows for quick and easy replacement of trimmer line. This method ensures uninterrupted trimming, saving time and increasing productivity. The adjustable cutting width provides flexibility, enabling users to switch between a wider cut for quick jobs and a narrower cut for precision work around flower beds and trees.

Another significant aspect of the Weed Eater 530086922 is its limited emission technology. Designed with environmental concerns in mind, it operates efficiently while minimizing harmful emissions. This commitment to reducing the environmental impact makes it a responsible choice for the eco-conscious gardener.

Durability is another characteristic that stands out in the Weed Eater 530086922. Constructed with high-quality materials, it is built to withstand the rigors of outdoor use. The trimmer is also designed for easy maintenance, ensuring it can be kept in excellent working condition with minimal effort.

In summary, the Weed Eater 530086922 is an exceptional string trimmer that combines power, efficiency, and ease of use. With its lightweight design, reliable engine, adjustable features, and eco-friendly technology, it is an excellent addition to any homeowner's landscaping toolkit. Whether you're maintaining your lawn or tackling overgrown areas, this trimmer is engineered to meet your gardening needs effectively.