Sears 950 operating instructions Risk of Electric Shock or Fire, Risk of Explosive Gases

Page 5

1.IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions

RISK OF ELECTRIC SHOCK OR FIRE.

1.1Read the entire manual before using this product. Failure to do so could result in serious injury or death.

1.2Keep out of reach of children.

1.3Use only recommended attachments. Use of an attachment not recommended or sold by the jump starter manufacturer may result in a risk of fire, electric shock or injury to persons or damage to property.

1.4Do not put fingers or hands into any of the jump starter’s outlets.

1.5Do not expose the jump starter to rain or snow.

1.6To reduce the risk of electric shock, turn off and/or unplug the jump starter before attempting any maintenance or cleaning. Simply turning off the controls will not reduce this risk.

1.7Do not operate the jump starter if it has received a sharp blow, been dropped or otherwise damaged in any way; take it to a qualified service person. (Call customer service at: 1-800-732-7764.)

1.8Do not disassemble the jump starter; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock. (Call customer service at: 1-800-732-7764.)

RISK OF EXPLOSIVE GASES.

1.9WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE

jump starter.

1.10To reduce the risk of a battery explosion, follow these instructions and those published by the battery manufacturer and the manufacturer of any equipment you intend to use in the vicinity of the battery. Review the cautionary markings on these products and on the engine.

2

Image 5
Contents OPERATOR’S Manual Page Table of Contents Page Risk of Explosive Gases Risk of Electric Shock or FirePage Negative Grounded System Follow These Steps When connecting to a BatteryFeatures Grounding and AC power cord connectionsAssembly Instructions Jump Starting a Vehicle Engine Operating InstructionsDigital Display Functions Appliance Type Estimated Wattage Estimated Usage Time Powering a 12V DC DeviceRisk of Explosion Using the Built-In Light Using the USB PortMaintenance Instructions Moving and Storage InstructionsCharge Immediately After Purchase Keep Fully Charged Troubleshooting Problem Possible Cause REASON/SOLUTIONReplacement PARTS/accessories Specifications