Grounding and AC power cord connections, Features

4.Grounding and AC power cord connections

RISK OF ELECTRIC SHOCK OR FIRE.

4.1The jump starter charger is for use on a nominal 120-volt circuit. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. The plug pins must fit the receptacle (outlet). Do not use with an ungrounded system.

4.2 Never alter the AC cord or plug provided – if it does not fit the outlet, have a proper grounded outlet installed by a qualified electrician. An improper connection can result in a risk of an electric shock or electrocution. NOTE: Pursuant to Canadian Regulations, use of an adapter plug is not allowed in Canada. Use of an adapter plug in the United States is not recommended and should not be used.

5.ASSEMBLY INSTRUCTIONS

Remove all cord wraps and uncoil the cables prior to using the jump starter.

6.FEATURES

1.Jump Start On/Off Switch

2.Digital Display

3.Work Light

4.Two, 12V DC power outlets

5.Rear charger plug (not shown)

6.Clamps and Cables

7.USB Port

8.Power Switch

9.Wall charger (not shown)

• 5 •