McCulloch 966564101, ZM4619 manual Safety System, Tire Pressures

Page 37

MAINTENANCE

Safety System

The machine is equipped with a safety system that prevents starting or driving under the following conditions.

The engine can only be started when:

The mower deck is disengaged.

The steering controls are in the outer, locked neutral position.

The driver is sitting in the driver’s seat.

The parking brake is on.

Make daily inspections to ensure that the safety system works by attempting to start the engine when one of the conditions is not met. Change the conditions and try again.

If the machine starts when one of these conditions is not met, turn the machine off and repair the safety system before using the machine again.

Make sure the engine stops when the parking brake is not engaged and the operator leaves the seated position.

Check that the engine stops if the mower blades are engaged and the driver temporarily moves off the drivers seat.

Tire Pressures

All four tires should have a pressure of 15 psi / 103 kPa /1 bar.

8058-078

Steering controls locked in neutral

8058-079

Check tire pressure

37

Image 37
Contents Operator Manual Page Table of Contents Page Introduction Manufacturing Number Good ServiceSymbols and decals Manual Performing any Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsMotion Control Levers Bypass Linkage Seat Adjustment LeverUnlocking Transmission Fuel Tank Choke Control Ignition SwitchThrottle Control Cutting Height Adjuster Blade SwitchParking Brake Always use the high position to transportFuel Shut Off Valve FusesSteering TrainingStarting the Engine Before StartingPlace controls in neutral position USE Full Throttle When Mowing To remove cables, reverse order Weak BatteryRunning Mower deck’s anti-scalp rollers should be evenly adjustedOperating On Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MaintenanceBefore After Year 100 Replacing battery BatteryTire Pressures Safety SystemDeck Belt Faulty adjustment can cause an accidentDeck Belt Removal EZT Belt Installation Deck Belt InstallationPump Belt Replacing EZT E-Series Zeroturn Transaxle beltCutting Blades Blade replacementAnti-scalp Rollers Deck Leveling Adjusting the Mower DeckUse protective glasses when cleaning and washing CleaningCaster Wheels HardwareLubrication Schedule LubricationGeneral Deck Spindles Wheel and Deck ZerksFront Wheel Mount Front Wheel BearingsProblem Cause Trouble ShootingMaintenance section Trouble Shooting Storage ServiceWinter Storage Schematic Torque Specifications Technical DataHex Head Cap Screws Standard HardwareEngine ZM4619Transmission ZM4619 Equipment Overall dimensionsProductivity USA requirements Conformity CertificatesCE requirements Delivery Service Service JournalAction Stamp, signAfter 10 hours Daily ServiceHour Service Service Journal At least once each year Action Date, mtr reading Stamp, sign Page 115 349428R1 03/08/10