McCulloch MC30 Reverse Operation System ROS, Using the Reverse Operation System, To Transport

Page 15

RIDING MOWER

MODEL NUMBER MC30 (96022001300)

ELECTRICAL

PRODUCT NUMBER 960 22 00-13

LRV2

 

 

13

 

 

 

 

 

25

 

 

 

 

3

4

 

 

 

1

 

 

 

 

18

 

 

10

12

 

 

 

 

 

 

 

 

20

21

22

23

 

 

 

 

 

 

9

19

 

 

 

 

 

 

17

 

 

 

 

 

 

16

 

15

 

24

 

 

 

REVERSE OPERATION SYSTEM (ROS)

Your riding mower is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direc- tion with the deck clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the deck clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to al- low reverse operation with the deck clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged.

Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

1.Move motion control lever to neutral (N) position.

2.With engine running, turn ignition key counterclockwise to ROS "ON" position.

3.Look down and behind before and while backing.

4.Slowly move motion control lever to reverse (R) position to start movement.

5.When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" Position

Engine "ON" Position

 

(Normal Operating)

TO ATTACH DEFLECTOR

1.Unhook the 2 bungees from deck to the mulch cover.

Bungee

Mulch Cover

Bungee

2.Lift the mulch cover.

3.Attach the deflector to the hinge bracket.

Hinge Bracket

Deflector

Shield

4.Rest the mulch cover on the deflector.

5.Attach the 2 bungees from the deflector to the deck.

Deflector Shield

Mulch Cover

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope. Use the slope guide at the back of this manual.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake posi- tion and engage parking brake.

•Move motion control lever to neutral (N) position.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

When pushing or towing your riding mower, be sure to disengage transmission by placing shifter in neutral.

•Raise mower height adjustment to its high- est position with mower height adjustment lever.

•To reengage transmission, press brake and shift out of neutral.

30

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 06.28.11 TH/BD MC30Table of Contents WarrantyService Notes Service Notes Safety Rules Always wear eye protection when operat- ing machineGeneral Operation Safe Handling of Gasoline IV. ServiceII. Slope Operation III. ChildrenGeneral Service Riding MowerNever operate machine in a closed area Unassembled Parts Product SpecificationsProduct Specifications Read and observe the safety rulesTo Remove Riding Mower from ASSEMBLY/PRE-OPERATIONTools Required for Assembly HOW to SET UP Your Riding MowerLumbar Support Install SeatTo Adjust Seat Front and BackCheck Deck Levelness To Attach Front BumperCheck Tire Pressure To Attach Rear BumperChecklist 89 88 107 111 OperationIgnition Switch Used for starting and stopping the engine Know Your Riding MowerBrake into brake position Stopping HOW to USE Your Riding MowerTo SET Parking Brake Ground DriveTo Operate Mower To Adjust Mower Cutting HeightTo USE Throttle Control To Move Forward and BackwardTo Operate on Hills Using the Reverse Operation SystemReverse Operation System ROS To Attach DeflectorADD Gasoline Before Starting the EngineTo Start Engine Check Engine OIL LevelMowing Tips Troubleshooting ChartMaintenance General RecommendationsBefore Each USE Other BatteryStorage EngineTransaxle Cooling BatteryTo Start Engine with a Weak Battery Replacing BatteryCleaning To Remove Mower Service and AdjustmentsTo Level Mower Housing To Install Mower

MC30 specifications

The McCulloch MC30 is a versatile and powerful chainsaw designed to meet the needs of both professional users and DIY enthusiasts alike. Known for its lightweight design and easy maneuverability, the MC30 allows users to tackle a variety of cutting tasks with confidence and efficiency.

One of the standout features of the McCulloch MC30 is its robust 30cc engine, which offers an excellent balance of power and efficiency. This engine is engineered with advanced technology that enables it to deliver high performance while minimizing fuel consumption. Users will appreciate the quick start technology, which reduces the effort required to start the chainsaw, making it more accessible for those who may not have extensive experience with power tools.

The MC30 is equipped with a high-quality 12-inch bar and chain, allowing for smooth, precise cuts in a range of materials. This is particularly beneficial when trimming branches, cutting firewood, or performing other outdoor maintenance tasks. The low kickback chain enhances safety while still providing the cutting power needed for effective performance.

Ergonomics play a significant role in the design of the McCulloch MC30. The chainsaw features a comfortable handle and an adjustable pivoting chain oil pump, which allows users to set the oil flow rate according to their cutting demands. This not only improves the longevity of the bar and chain but also ensures a seamless cutting experience.

Another innovative characteristic of the MC30 is its anti-vibration technology, which reduces the vibration transmitted to the user's hands. This feature is particularly crucial during extended use, as it helps decrease fatigue and increases overall comfort. The chainsaw also includes a tool-less chain tensioning system, allowing for easy adjustments to the chain without the need for additional tools.

Safety is an essential consideration in the design of the McCulloch MC30, which includes a chain brake feature that provides added protection against accidental chain movement. This model also sports a protective bar sheath for safe storage when the tool is not in use.

In summary, the McCulloch MC30 is a powerful yet lightweight chainsaw that combines performance and comfort. With its advanced engine technology, ergonomic design, and essential safety features, it is an ideal choice for anyone looking to undertake a variety of cutting tasks around the home or on the job site. Whether you're an experienced user or a newcomer, the MC30 delivers reliability and efficiency in a compact package.
Top Page Image Contents