Checklist | McCulloch MC30 manual

✓CHECKLIST

Before you operate your new riding mower, we wish to assure that you receive the best performance and satisfaction from this Qual- ity Product.

Please review the following checklist:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly connected.

✓Seat is adjusted comfortably and tight- ened securely.

✓All tires are properly inflated. (For ship- ping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower belt. Be sure it is routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

While learning how to use your riding mower, pay extra attention to the following important items:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Operation System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

RIDING MOWER	MODEL NUMBER MC30 (96022001300)
DRIVE	PRODUCT NUMBER 960 22 00-13

KEY	PART		KEY	PART
NO.	NO.	DESCRIPTION	NO.	NO.	DESCRIPTION
1	532 44 20-79 WHEEL ASM (REAR)		70	532 41 15-55	GRIP LEVER
2	532 12 17-48 WASHER, 16 GA.		71	532 43 68-65 TUBE SHIFT LRV
3	812 00 00-01	E-CLIP	72	872 11 04-06	BOLT CARR.
6	532 15 69-72	SPACER AXLE	73	873 68 04-00	NUT CROWNLOCK 1/4 - 20 UNC
7	874 78 04-28 HCS 1/4-20 X 1-3/4 GR 5 ZD		75	532 43 67-00 BRACKET MOUNT SHIFT
8	532 43 66-95	WELMENT SUPPORT AXLE RH	76	532 18 35-00	HUB SHIFT
9	532 44 19-36 SUBASM FINAL DRIVE		78	532 42 90-55 SPACER NYLON .866 X 1.25 X
10	817 00 05-12 SCREW 5/16 - 18 X 3/4				.250
11	532 43 67-41	BRACKET.SUPPORT.RH	79	874 78 04-12	BOLT.FIN.HEX.1/4-20 UNC X .75
12	532 43 61-48 CASE CHAIN RH		80	810 04 04-00	WASHER LOCK HVY HLCL
13	532 43 72-80 BEARING BALL 6207-SRS				SPRING
14	532 43 71-76	SPROCKET DRIVEN 37 TOOTH	81	819 09 12-10 WASHER 9/32 X 3/4 X 10 GA.
15	532 44 25-51 TUBE INPUT HEX		84	819 11 16-10	WASHER 11/32 X 1.00 X 10 GA.
16	532 43 61-53 CHAIN PRIMARY DRIVE		85	532 43 69-14 SPRING FRICTION PACK
17	532 43 72-82 BEARING BALL 6204-3-2RS		86	532 43 73-04	BUSHING PACK FRICTION FD2
18	532 43 61-49 CASE CHAIN LH		87	532 43 69-48 WASHER PLASTIC
19	818 05 10-10	SCREW 10 - 24 X 5/8 PAN HEAD	88	532 43 67-01 STUD PACK FRICTION
		TORX	89	532 43 72-99 SPACER PACK FRICTION FD2
20	532 12 49-31 WASHER THRUST .75 X 1.230		90	819 11 14-16 WASHER.11/32 X 7/8 X 16 GA.
22	532 43 66-96	WELMENT SUPPORT AXLE LH	91	532 43 69-24	SUBASM.LINK.SHIFT
23	818 10 10-08 SCREW TORX #10 - 14 X 1/2		94	532 43 69-18	WELDMENT.SHIFT.FD2
32	532 43 61-51 BLOCK TENSION CHAIN		95	532 43 68-66	PLATE.SHIFT
33	532 43 61-50	SPRING ADJUSTER TENSION	96	532 43 77-67 DRUM CLUTCH MULTI DISC
34	877 10 10-40 PIN CLEVIS 5/16 X 2-1/2		97	532 43 69-25	SUBASM LINK SHIFT PRIMARY
36	532 43 57-22 SHAFT INPUT CLUTCH		98	532 15 03-60	NUT LOCK CENTER 1/4 - 28
37	532 43 61-52	SPROCKETSPLINED14TOOTH			FNTHD
39	532 43 04-70 BEARING BALL		101	817 06 06-24	SCREW.3/8-16X1-1/2. SMGML.
40	532 43 69-39	ARM BRAKE			TAP/R
41	532 10 95-53 SWITCH INTLK CL MWR GRY		102	532 08 67-77	THREAD.CUTTER
		4 TERM	103	532 10 44-45	SWITCH.SEAT.
43	873 80 05-00 NUT LOCK HEX W/INSERT		104	532 43 77-81	HUB CENTER
		5/16 - 18 UNC	105	532 43 61-42 SPRING WAVE C125-H5
44	532 43 66-52 COVER END HEX		106	532 19 43-21 SPACER RETAINER
45	532 43 61-54	SPRING DRIVE	107	532 12 47-88	RETAINER.SPRING.1”.ZINC/
47	532 43 69-49 BRACKET MOUNT CABLE				CAD
		LRV B	108	532 43 67-84	BUSHING.5/16IDX7/16ODX1/2
48	817 54 10-16 SCREW.HEX.HEAD WASH.10-		109	532 19 32-68 CAP.HUB.AXLE.1.50 X 1.00
		24X1.00	110	532 42 84-61 BRACKET SHIFTER FLEX
51	532 43 67-39 BRACKET SUPPORT LH		111	532 12 35-83	KEY.SQUARE.2.0 X .1845/.1865
53	873 90 06-00 LOCK NUT, FLANGED		112	818 10 10-12 SCREW TORX #10-14 X .750
54	532 43 57-26 BEARING BALL		113	873 90 05-00 NUT LOCK FLANGE HEX
55	532 43 77-77 COVER WHEEL CLUTCH		114	532 43 62-82 BEARING FLANGE
57	532 43 65-59 WHEEL FRICTION

59532 44 10-97 PLATE.CLUTCH.DRIVE

60532 43 77-87 PLATE PRESSURE DRIVE

62532 43 77-86 PLATE CLUTCH BRAKE

63532 43 77-85 PLATE PRESSURE BRAKE

65532 43 57-23 PLATE PRESSURE MASTER

66532 43 57-24 BEARING THRUST 20MM

67532 43 57-25 PLATE THROWOUT

68	532 43 57-28	BEARING BALL LOOSE	NOTE: All component dimensions given in U.S. inches
69	532 43 57-27	COVER CLUTCH	1 inch = 25.4 mm

MC30 specifications

The McCulloch MC30 is a versatile and powerful chainsaw designed to meet the needs of both professional users and DIY enthusiasts alike. Known for its lightweight design and easy maneuverability, the MC30 allows users to tackle a variety of cutting tasks with confidence and efficiency.

One of the standout features of the McCulloch MC30 is its robust 30cc engine, which offers an excellent balance of power and efficiency. This engine is engineered with advanced technology that enables it to deliver high performance while minimizing fuel consumption. Users will appreciate the quick start technology, which reduces the effort required to start the chainsaw, making it more accessible for those who may not have extensive experience with power tools.

The MC30 is equipped with a high-quality 12-inch bar and chain, allowing for smooth, precise cuts in a range of materials. This is particularly beneficial when trimming branches, cutting firewood, or performing other outdoor maintenance tasks. The low kickback chain enhances safety while still providing the cutting power needed for effective performance.

Ergonomics play a significant role in the design of the McCulloch MC30. The chainsaw features a comfortable handle and an adjustable pivoting chain oil pump, which allows users to set the oil flow rate according to their cutting demands. This not only improves the longevity of the bar and chain but also ensures a seamless cutting experience.

Another innovative characteristic of the MC30 is its anti-vibration technology, which reduces the vibration transmitted to the user's hands. This feature is particularly crucial during extended use, as it helps decrease fatigue and increases overall comfort. The chainsaw also includes a tool-less chain tensioning system, allowing for easy adjustments to the chain without the need for additional tools.

Safety is an essential consideration in the design of the McCulloch MC30, which includes a chain brake feature that provides added protection against accidental chain movement. This model also sports a protective bar sheath for safe storage when the tool is not in use.

In summary, the McCulloch MC30 is a powerful yet lightweight chainsaw that combines performance and comfort. With its advanced engine technology, ergonomic design, and essential safety features, it is an ideal choice for anyone looking to undertake a variety of cutting tasks around the home or on the job site. Whether you're an experienced user or a newcomer, the MC30 delivers reliability and efficiency in a compact package.

✓CHECKLIST

RIDING MOWER

PRODUCT NUMBER 960 22 00-13

KEY

SPROCKET DRIVEN 37 TOOTH

HUB CENTER

532 43 67-39 BRACKET SUPPORT LH

532 43 77-77 COVER WHEEL CLUTCH

MC30 specifications