McCulloch 532 43 67-90 manual Reverse Operation System ROS, To Operate on Hills, To Transport

Page 11

OPERATION

1.Select desired height of cut.

2.Start mower blade by engaging deck clutch lever.

TO STOP MOWER BLADE- Disengage deck clutch lever.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

Deflector Shield

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation Sys- tem (ROS). Any attempt by the operator to travel in the reverse direction with the deck clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the deck clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the deck clutch en- gaged, should only be done when the operator decides it is necessary to reposition the machine with the attach- ment engaged. Do not mow in reverse unless abso- lutely necessary.

USING THE REVERSE OPERATION SYSTEM

Only use if you are certain no children or other bystand- ers will enter the mowing area.

1.Move motion control lever to neutral (N) position.

2.With engine running, turn ignition key counterclock- wise to ROS "ON" position.

3.Look down and behind before and while backing.

4.Slowly move motion control lever to reverse (R) posi- tion to start movement.

5.When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" Position

Engine "ON" Position

 

(Normal Operating)

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope. Use the slope guide at the back of this manual.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

Move motion control lever to neutral (N) position.

To restart movement, slowly release parking brake and clutch/brake pedal.

Make all turns slowly.

TO TRANSPORT

When pushing or towing your riding mower, be sure to disengage transmission by placing freewheel control in freewheel position. Freewheel control is located at the rear drawbar of the riding mower.

Raise mower height adjustment to its highest position with mower height adjustment lever.

Push freewheel control down and over with foot.

To reengage transmission, reverse above procedure, or press brake lever all the way down.

Freewheel

Control

Disengaged

Freewheel

Control

Engaged

BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL

The engine in your riding mower has been shipped, from the factory, already filled with summer weight oil.

1.Check engine oil with riding mower on level ground.

2.Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Main- tenance section of this manual).

To change engine oil, see the Maintenance section in this manual.

02828

11

Image 11
Contents Mowcart II. Slope Operation Safety RulesGeneral Operation III. Children IV. Service Safe Handling of GasolineGeneral Service Table of Contents Unassembled Parts To Remove Riding Mower from Carton AssemblyTools Required for Assembly HOW to SET UP Your Riding MowerCheck for Proper Positon of Mower Drive Belt Check BatteryCheck Tire Pressure Check Deck LevelnessOperation ROS Know Your Riding MowerHOW to USE Your Riding Mower To Transport Using the Reverse Operation SystemReverse Operation System ROS To Operate on HillsRecoil Starting System ADD GasolineTo Start Engine Mowing TipsBefore Each USE MaintenanceGeneral Recommendations Riding Mower Engine BatteryTransaxle Cooling BeltAIR Filter Clean AIR ScreenClean AIR INTAKE/COOLING Areas CleaningTo Remove Mower Service and AdjustmentsTo Install Mower To Replace Mower Blade Drive Belt To Level Mower HousingReplacing Battery To Adjust BrakeTo Adjust Steering Wheel Alignment To Start Engine with a Weak BatteryTo Replace Fuse Interlocks and RelaysOther StorageMower Troubleshooting Points Mower blade will 06.02.10 CL

MOWCART 66, 532 43 67-90, 96021000900 specifications

The McCulloch 96021000900,532 43 67-90, MOWCART 66 is a versatile and robust lawn care solution designed for homeowners and landscape professionals alike. This innovative product combines power, functionality, and user-friendly features, making it an essential addition to any garden maintenance toolkit.

One of the standout features of the MOWCART 66 is its powerful engine. It is equipped with a reliable and efficient motor that delivers exceptional cutting performance. This ensures that even the toughest grass and overgrown areas are tackled with ease, providing a clean, even cut every time. The engine's design also emphasizes fuel efficiency, allowing users to complete larger tasks without frequent refueling.

The MOWCART 66 boasts a wide cutting deck, enabling it to cover substantial ground in a single pass. The adjustable cutting height feature allows users to customize their lawn care experience according to their preferences or the specific needs of their lawn. Whether it’s a manicured lawn or a more rugged terrain, the MOWCART 66 offers the adaptability required to meet diverse conditions.

The design of the MOWCART 66 places significant emphasis on user comfort and convenience. Its ergonomic handle makes maneuvering the machine effortless, reducing strain on the user during extended use. Additionally, the lightweight construction ensures that the unit remains easy to handle, even in tight spaces.

Another notable aspect of the McCulloch MOWCART 66 is its cutting technologies. The product incorporates advanced blade designs that enhance cutting efficiency and reduce the risk of clogging. This technology ensures that the clippings are finely chopped, allowing for better mulch distribution, which enriches the soil and promotes healthy grass growth.

Safety is paramount in the design of the MOWCART 66. It is equipped with various safety features to protect the user while in operation. These include a blade brake that stops the blades immediately when the user releases the handle, minimizing potential accidents.

In summary, the McCulloch 96021000900,532 43 67-90, MOWCART 66 represents a blend of power, adaptability, and ease of use. Its high-performance engine, wide cutting deck, and user-centric design make it a valuable tool for anyone looking to maintain a pristine outdoor space. Whether you're a seasoned landscaper or simply looking to keep your yard in top shape, the MOWCART 66 is engineered to meet your lawn care needs efficiently and effectively.