McCulloch 532 43 67-90, MOWCART 66, 96021000900 manual Riding Mower

Page 14

MAINTENANCE

RIDING MOWER

Always observe safety rules when performing any maintenance.

BRAKE OPERATION

If riding mower requires more than four (4) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See PSI on tires).

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

AXLE AND SPINDLES

•Front wheel axles and front spindles should be properly lubricated.

•Wheel Axles should be lubricated with a dry, powdered graphite type lubricant.

•Spindles should be lubricated with a spray type silicone base lubricant.

Spindle

Wheel Axle

OPERATOR PRESENCE SYSTEM AND REVERSE OPERATION SYSTEM (ROS)

Be sure operator presence and reverse operation sys- tems are working properly. If your riding mower does not function as described, repair the problem immediately.

•The engine should not start unless the brake pedal is fully depressed, and the deck clutch lever is in the disengaged position.

CHECK OPERATOR PRESENCE SYSTEM

•When the engine is running, any attempt by the opera- tor to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the deck clutch lever is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The deck clutch lever should never operate unless the operator is in the seat.

CHECK REVERSE OPERATION (ROS) SYSTEM

•When the engine is running with the ignition switch in the engine "ON" position and the deck clutch lever en- gaged, any attempt by the operator to shift into reverse should shut off the engine.

•When the engine is running with the ignition switch in the ROS "ON" position and the deck clutch lever en- gaged, any attempt by the operator to shift into reverse should NOT shut off the engine.

BLADE CARE

For best results mower blades must be sharp. Replace worn, bent or damaged blades.

CAUTION: Use only a replacement blade approved by the manufacturer of your riding mower. Using a blade not approved by the manufacturer of your riding mower is hazardous, could damage your riding mower and void your warranty.

 

02828

ROS "ON"

ENGINE "ON" POSITION

POSITION

(NORMAL OPERATING)

BLADE REMOVAL

1.Raise mower to highest position to allow access to blade.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

2.Remove blade bolt by turning counterclockwise.

3.Install new blade with stamped "THIS SIDE UP" fac- ing deck and mandrel assembly.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4. Install and tighten blade bolt securely (45-55 Ft. Lbs.).

Mandrel

Assembly

Blade

Blade Bolt (Special)

02545

Star

Center Hole

IMPORTANT: Special blade bolt is heat treated.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Mowcart II. Slope Operation Safety RulesGeneral Operation III. Children IV. Service Safe Handling of GasolineGeneral Service Table of Contents Unassembled Parts HOW to SET UP Your Riding Mower AssemblyTools Required for Assembly To Remove Riding Mower from CartonCheck Deck Levelness Check BatteryCheck Tire Pressure Check for Proper Positon of Mower Drive BeltOperation Know Your Riding Mower ROSHOW to USE Your Riding Mower To Operate on Hills Using the Reverse Operation SystemReverse Operation System ROS To TransportMowing Tips ADD GasolineTo Start Engine Recoil Starting SystemBefore Each USE MaintenanceGeneral Recommendations Riding Mower Belt BatteryTransaxle Cooling EngineCleaning Clean AIR ScreenClean AIR INTAKE/COOLING Areas AIR FilterTo Remove Mower Service and AdjustmentsTo Install Mower To Level Mower Housing To Replace Mower Blade Drive BeltTo Start Engine with a Weak Battery To Adjust BrakeTo Adjust Steering Wheel Alignment Replacing BatteryInterlocks and Relays To Replace FuseOther StorageMower Troubleshooting Points Mower blade will 06.02.10 CL

MOWCART 66, 532 43 67-90, 96021000900 specifications

The McCulloch 96021000900,532 43 67-90, MOWCART 66 is a versatile and robust lawn care solution designed for homeowners and landscape professionals alike. This innovative product combines power, functionality, and user-friendly features, making it an essential addition to any garden maintenance toolkit.

One of the standout features of the MOWCART 66 is its powerful engine. It is equipped with a reliable and efficient motor that delivers exceptional cutting performance. This ensures that even the toughest grass and overgrown areas are tackled with ease, providing a clean, even cut every time. The engine's design also emphasizes fuel efficiency, allowing users to complete larger tasks without frequent refueling.

The MOWCART 66 boasts a wide cutting deck, enabling it to cover substantial ground in a single pass. The adjustable cutting height feature allows users to customize their lawn care experience according to their preferences or the specific needs of their lawn. Whether it’s a manicured lawn or a more rugged terrain, the MOWCART 66 offers the adaptability required to meet diverse conditions.

The design of the MOWCART 66 places significant emphasis on user comfort and convenience. Its ergonomic handle makes maneuvering the machine effortless, reducing strain on the user during extended use. Additionally, the lightweight construction ensures that the unit remains easy to handle, even in tight spaces.

Another notable aspect of the McCulloch MOWCART 66 is its cutting technologies. The product incorporates advanced blade designs that enhance cutting efficiency and reduce the risk of clogging. This technology ensures that the clippings are finely chopped, allowing for better mulch distribution, which enriches the soil and promotes healthy grass growth.

Safety is paramount in the design of the MOWCART 66. It is equipped with various safety features to protect the user while in operation. These include a blade brake that stops the blades immediately when the user releases the handle, minimizing potential accidents.

In summary, the McCulloch 96021000900,532 43 67-90, MOWCART 66 represents a blend of power, adaptability, and ease of use. Its high-performance engine, wide cutting deck, and user-centric design make it a valuable tool for anyone looking to maintain a pristine outdoor space. Whether you're a seasoned landscaper or simply looking to keep your yard in top shape, the MOWCART 66 is engineered to meet your lawn care needs efficiently and effectively.
Top Page Image Contents