McCulloch 532 40 80-72 manual Storage, Other, Fuel System, Engine OIL, Cylinders

Page 22

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

•Clean entire tractor (See “CLEANING” in the Mainte- nance section of this manual).

•Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Maintenance section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

•Fully charge the battery for storage.

•After a period of time in storage, battery may require recharging.

•To help prevent corrosion and power leakage during long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Mainte- nance section of this manual).

•After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

•If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

•Remove spark plug(s).

•Pour one ounce of oil through spark plug hole(s) into cylinder(s).

•Turn ignition key to “START” position for a few seconds to distribute oil.

•Replace with new spark plug(s).

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your tractor indoors and cover it to give protection from dust and dirt.

•Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model NO. M13538 13.5 HP 38 Inch Lawn Tractor General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Contents of Hardware Pack To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidCheck Deck Levelness Check Battery See FigCheck Tire Pressure Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine ADD Gasoline Mowing TipsTo Start Engine See Fig Maintenance Lubrication ChartTractor Blade Removal See FigBelts BatteryEngine Transaxle CoolingAIR Filter CleaningClean AIR Screen MufflerTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Replace Mower Blade Drive Belt See Fig To Level Mower HousingBelt Installation Belt RemovalTo Adjust Brake To Check and Adjust Brake See FigTransaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Replace Motion Drive Belt See FigReplacing Battery See Figs To Start Engine with a Weak Battery See FigTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

532 40 80-72 specifications

The McCulloch 532 40 80-72 is a standout model in the realm of garden and lawn care equipment, known for its power, efficiency, and user-friendly features. Designed for homeowners and professional landscapers alike, this versatile tool is equipped to handle a wide range of outdoor tasks, making it an essential addition to any gardening arsenal.

At the heart of the McCulloch 532 40 80-72 is a robust engine that delivers reliable performance. This powerful, two-stroke engine is designed for high efficiency, providing ample cutting power while maintaining lower fuel consumption. This not only ensures longer operational periods but also contributes to a more environmentally friendly approach to yard maintenance. The engine is optimized for reduced emissions, complying with modern environmental regulations without sacrificing performance.

One of the remarkable features of the McCulloch 532 40 80-72 is its ergonomic design. The machine boasts a comfortable grip handle that reduces fatigue during prolonged use. With an adjustable handle height, it caters to users of varying heights, allowing for a more personalized and comfortable experience. This attention to ergonomics ensures that users can manage their lawn care tasks with less strain, promoting productivity and ease of use.

Additionally, the cutting deck of the McCulloch 532 40 80-72 is engineered for durability and precision. The high-quality steel construction offers exceptional strength, while the design allows for efficient grass collection and even cutting. With adjustable cutting heights, users can customize the grass length to their preferences, enabling them to achieve a well-manicured lawn effortlessly.

Another noteworthy aspect of this model is its innovative starting system. Equipped with a reliable pull-start mechanism, the McCulloch 532 40 80-72 ensures quick and easy starts, even in cold weather conditions. This feature is particularly beneficial for those who need to get their outdoor tasks done swiftly, minimizing downtime and maximizing efficiency.

The self-propelled functionality adds an extra layer of convenience, allowing users to maneuver the mower with ease across varying terrain types. This feature not only reduces the physical effort required but also enhances the overall mowing experience.

In summary, the McCulloch 532 40 80-72 combines power, durability, and user-friendly features to create a high-performing lawn care solution. Its efficient engine, ergonomic design, durable cutting deck, and easy starting system make it a reliable choice for anyone seeking to maintain their outdoor spaces efficiently and effectively. Whether for occasional yard work or regular maintenance, the McCulloch 532 40 80-72 stands out as an exemplary tool in modern lawn care technology.
Top Page Image Contents