Sears 917.25667 owner manual Storage, Tractor, Other, Fuel System, Engine OIL

Page 28

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor wilt not be used for 30 days or more.

II

ACAUTION: Never store the tractor with

,_/_. gasoline in the tank inside a building where fumes may reach an open flame

or spark. Allow the engine to cool

......... befor estoring, in any enc!osu[e:

d

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thor- oughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

-Clean entire tractor (See"CLEAN ING" in the Customer Responsibilities section of this manual).

Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

oLubricate as shown in the Customer Responsibilities section of this manuat.

oBe sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

oTouch up all rusted or chipped paint surfaces; sand lightly before painting

BATTERY

o Fully charge the battery for storage.,

oAfter a period of time in storage, battery may require recharging

oTo help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected and battery cleaned thoroughly (see "TO CLEAN BATTERY AND TERMINALS" in the Cus- tomer Responsibilities section of this manual)

oAfter cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals

o Be sure battery drain tube is securely attached°

oIf battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS iMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL

SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO,

EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR

METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING

STORAGE ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE

°Drain the fuel tank_

Start the engine and let it run until the fuel lines and carburetor are empty.

oNever use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

o Use fresh fuel next season..

NOTE: Fuel stabilizer is an acceptable aFternative in minimizing the formation of fuel gum deposits during stor- age.. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer

container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do

not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine Clio (See "ENGINE" in the Customer Responsibilities section of this manual).

CYLINDERS

°Remove spark plug(s).

Pour one ounce of oil through spark plug hole(s) into cylinder(s)

oTurn ignition key to"START" position for a few seconds to distribute oil.

°Replace with new spark plug(s).

OTHER

=Do not store gasoline from one season to another.

oReplace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline win cause problems,

. If possible, store your tractor indoors and cover it to give protection from dust and dirt.

oCover your tractor with a suitable protective cover that

does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

8

Image 28
Contents Model Number 917.256670 Ownersmanual Safe Operation Practices for Ride-On Mowers II. Slope OperationMaintenance Agreement Product SpecificationsLimited TWO Year Warranty on Craftsman Riding Equipment Limited 90 DAY Warranty on BatteryINDEX Engine Maintenance Accessories AN Attach EntsPerformance Parts bag contents not shown full size Parts packed separately in cartonAssembly Tools Required for AssemblyBefore Rolling Tractor OFF Skid Unpack CartonHOW to SET UP Your Tractor Connect Battery See FigInstall Seat See Fig Check Tire PressureInstall MowerDrive Belt Check for Proper Position of ALL BeltsChecklist Install Mulcher PlateSee Figs To Convert to Bagging orOperation LockKnow Your Tractor Operaon HOW to USE Your TractorTo SET Parking Brake See Fig Before Starting the Engine To Operate Mower See FigTo Operate on Hills ADD GasolinePurge TRANSM!SSION To Start Engine See FigHydrostatic Transmission Warm UP Mowing Tips OperatjoMulching Mowing Tips Maintenance Schedule Lubrication ChartCustomer Responsibilities NJoyBlade Removal See Fig To Sharpen Blade See FigEngine BeltsTransaxle Cooling Transaxle Pump FluidCleaning Engine Cooling Fins See FigMuffler Spark PlugsService and Adjustments To Install MowerTo Level Mower Housing To Remove Mower See FigAdjustments SERVmCEANTo Replace Mower Drive Belt To Replace Mower Blade Drive Belt See FigTo Adjust Attachment Clutch See To Adjust Brake See FigTo Replace Motion Drive Belt With Parking Brake EngagedTo Adjust Motion Control Lever Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERTo Remove Hood and Grill Assembly To Adjust Throttle Control CableTo Start Engine WiTH a Weak Batter See FigService Adjustments To Adjust Choke Control See FigTo Adjust Carburetor See Figs Preliminary SettingStorage TractorOther Fuel SystemProblem PointsCause CorrectionTroubleshooting Problem CauseSchematic SparkElectrical KEY Part Description PTOChassis and Enclosures Repair Parts KEY Part NO. noDrive KEY Part 801D x 1.50DSteering Assembly Tractor -- Model Number Seat Assembly DescriptionWheels Tires DecalsDescription KEY Part ENGINE27 Optional EquipmentKEY Part KEY DescriptionMower Lift KEY PartMower Deck Tractor - Model Number UNCHydro Gear Transaxle Model Number Locknut, Hex Tractor - Model Number Carburetor KIT Briggs & Stratton Engine Model Number 42A707, Type NumberGasket SET 801 8O2 615A 653 201414 206308A 308 307 306Repaur Parts KEY Part Description NO. noTractor --MODEL Number Page Suggested Guide for SiGHTiNG Slopes for Safe Operation For Repair SERVICE, Call this Toll Free Number Part Number Part Description