Sears 917.25559 manual Ervice AN Adjustm TS, To Removemower See Fig

Page 18

ERVICE AN ADJUSTM TS

CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

•Depress clutch!brake pedal fully and set parking brake.

oPlace motion control lever in "NEUTRAL" position.

-Place attachment clutch in "DISENGAGED" position.

oTurn ignition key "OFF" and remove key.

oMake sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug,

TRACTOR

TO REMOVEMOWER (See Fig. 19)

Mower will be easier to remove from the right side of unit.

,Place attachment clutch in "DISENGAGED" position.

oMove attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine puItey,

oDisconnect clutch rod from clutch lever by removing retainer spring.

oDisconnect suspension arms from rear deck brackets by removing retainer springs.

,Disconnect front links from deck by removing retainer springs.

oRaise lift lever to raise suspension arms. Slide mower out from under tractor.

iMPORTANT: IF AN ATTACHMENT OTHER THAN THE

MOWER tS TO BE MOUNTED TO THE TRACTOR, THE R.H. AND L.H. SUSPENSION ARMS MUST BE REMOVED FROM TRACTOR.

CLUTCH

ROD

RETAINER

SPRINGS

\

\

TO iNSTALL MOWER (See Fig. 19)

-Raise attachment lift lever to its highest position.

oSlide mower under tractor with discharge guard to right side of tractor.

,	Lower lift lever to its lowest position.
o	Install mower in reverse order of removal instructions.	FiG. 19

ENGINE

PULLEY

18

Image 18

Contents Owners Manual Model no I1. Slope Operation IV. ServiceSafe Operation Practices for RideOn Mowers ChildrenMawntenance Agreement RaND Accessories AN Attachments Engine NantenancePerformance Contents of Hardwa Pack Unpack Carton Tools Required For AssemblyTo Remove Unit from Carton Attach STEE!RJNG Wheel See FigCheck Tire Pressure Adjustmentlock Washer BoltNstall Seat See Fig Check Deck LevelnessASS LY CheckmstOperation NOW Your TractorTo SET Parking Brake See Fig HOW to USE Your TractorTo Adjust Mower Cutting HIT l,,= Fig To USE Throttle Control See FigTo Operate on Hills OpefiatioBefore Starting the Engine To TransportOperatio Mowing TipsCustom Espo Maintenance ScheduleChart General RecommendationsTires TractorBrake Operation Blade CareTransaxle Pump Fluud Level See Figs, t3 Transaxle CooungMuffler Custo E ResponsiClsaning Spark PlugsErvice AN Adjustm TS To Removemower See FigService AN Adjustments To Level Mower HousingTo Adjust Brake See Fig, ,!5 Service ANAdjustments To Replace Mower Blade Drive BeltConnector Service AN AdjustmentsTo Adjust Motion Control Lever Forward AdjustmentTo Remove Wheel for Repairs See Fig To Start Engine WiTH a Weak BatteryFront Wheel TOE-IN/CAMBER To Attach Jumper CablesService ITO Replace Fuse See FigTo Replace Headlight Bulb Preliminary Setting To Adjust Carburetor See FigFinal Setting Acceleration TestFuel System StorageEngine Engine OILProblem Cause CorrectionProblem Cause Correction Trou Leshooti G PointsSolenoid Wiring Insulated Clips NON-REMOVABLE ConnectionsFuse 3OAMP Pedal UP CLUTCH/BRAKEKEY Part Description NO. no DecalsWheels and Tires KEYRepair Parts KEY Part Standard Hardware -- Purchase LocallyRepair Parts Chassb and Enclosures 12.5 HP 38 Riding Lawn Tractor -MODEL Number 917,255590 Standard Hardware DrhveKEY Part Description Locally3543 2324 12.5 HP 38 Riding Lawn Tractor =.. Model Number 917,255590 KEY PartDescription EQU1PM ENT KEY Part DescriptionStandard Hardware - Purchase Locally 12.5 HP 38 Riding Lawn Tractor == Model Number 917,255590 KEY Part NO. no KEY Part DescriptionSeat Assem BLY KEY Part NO. no DescriptionSection Repair Parts 12.5 HP 38 R DtNG Lawn Tractor = Model Number 9!7o255590 Descrbption837 GasketsetSpecial Tools Required to NSTALLo 13114 125KEY Number ManufacturerKEY Part Dsscription 005Part NO. no Suggested Guide for SiGHTiNG Slopes for Safe Operation LAW Tractor MoweAutomatic Hydrostatic Part Description