SERVICE AND
...... iTO REPLACE FUSE (See Fig, 31)
Replace with 30 amp
FiG. 3i
TO REPLACE HEADLIGHT BULB
°Raise hood,
oPull bulb holder out of the hole in the backside of the grill.
°Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.
°Close hood.
ADJUSTMENTS
TO REMOVE HOOD AND GRILL (See Fig. 32}
_/
CAUTION: Muffler is hot. Be careful i!
when removing retainer springs from _i_
I | hood pivot brackets, | i |
°Raise hood.
tUnsnap headlight wire connector.
°Remove retainer springs from hood pivot brackets.
=Stand in front of tractor. Grasp hood at sides, tilt forward and lift off of tractor.
•To reinstall, slide hood pivot brackets into slots in frame. Replace retainer springs.
•Reconnect headlight wire connector and close hood.
HEADLIGHT
CONNECTOR
HOOD
\
iNTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor to run poorly, stop running or prevent it from starting.
oCheck wiring. See electrical wiring diagram in Repair Parts section of this manual.
REMOVE RETAINER SPRINGS
FiG. 32
23