Replace Spark Plug, Replace Fuel Filter

Idle Speed Screw

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed, nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Filter

Fuel Line

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric

motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit.

SStore in a clean dry area.

S Clean all parts and check for damage. Have damaged parts repaired or replaced by an authorized service dealer.

SKeep all nuts, bolts, and screws tight.

SLightly oil external metal surfaces, includ-

ing the blade.

To oil the blade, do the following:

SStop the engine and allow blade to come to

a complete stop.

SEnsure ON/OFF switch is in the OFF posi-

tion.

SDisconnect the spark plug wire.

SApply a light machine oil along the edge of the top strap as shown.

OIL

Top Strap

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine. Fuel stabilizer is an ac- ceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabi- lizer to gasoline in fuel tank or fuel storage con- tainer. Follow the mix instructions found on sta- bilizer container. Run engine at least 5 minutes after adding stabilizer.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom- mended type and heat range (see RE- PLACE SPARK PLUG section).

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to

another.

SReplace your gasoline can if it starts to rust.

NEED ASSISTANCE?

Call 1-800-554-6723 for assistance.

NEED SERVICE PARTS?

Contact your authorized service dealer.

-- 7 --

530163353 specifications

The Weed Eater 530163353 is a versatile and efficient solution for those seeking a reliable string trimmer for their gardening and landscaping needs. Designed to tackle a variety of outdoor tasks, this trimmer combines power, convenience, and technology to deliver exceptional performance.

One of the main features of the Weed Eater 530163353 is its lightweight design, which makes it easier for users to maneuver and operate for extended periods without fatigue. Weighing in at a modest level, this trimmer is perfect for both homeowners and professional landscapers who require an efficient tool for maintaining lawns and gardens.

Power is a crucial aspect of any string trimmer, and the Weed Eater 530163353 does not disappoint. Equipped with a reliable gas engine, it provides ample cutting power, allowing users to tackle tough weeds and thick grass with ease. The engine's design ensures consistent performance while maintaining fuel efficiency, meaning users can get more done without constantly refueling.

One of the standout features of the Weed Eater 530163353 is its innovative automatic feed system. This technology allows for seamless line advancement, meaning the trimmer will automatically release more line as needed while in use. This eliminates the need to stop and manually adjust the line, ensuring a smooth and uninterrupted trimming experience. The result is a more efficient trimming process that saves time and energy.

In addition to its powerful engine and automatic feed system, the Weed Eater 530163353 is designed with user comfort in mind. The ergonomic handle provides a comfortable grip, reducing strain on the hands and wrists during extended use. Furthermore, the adjustable shaft length allows users to customize the trimmer to their height, promoting good posture and reducing fatigue.

Durability is another key characteristic of the Weed Eater 530163353. Built with high-quality materials, this trimmer is designed to withstand the rigors of outdoor use. Its rugged construction ensures that it can handle tough conditions and provide reliable performance over time.

With its combination of power, efficiency, and user-friendly features, the Weed Eater 530163353 is an excellent choice for anyone looking to maintain their yard or garden. Whether you are a homeowner seeking to keep your lawn pristine or a professional landscaper in need of a reliable tool, this string trimmer offers everything you need to get the job done effectively.