Weed Eater 530163353 Stopping Your Engine, Starting Your Engine, Starting a Warm Engine

Page 5

STOPPING YOUR ENGINE

D To stop the engine, move the ON/OFF switch to the OFF position.

STARTING YOUR ENGINE

DFuel engine. Move at least 10 feet (3 me- ters) away from the fueling site.

DHold the unit on the ground in the starting position as shown. Support unit so the blade is off of the ground and away from trees, bushes, onlookers, etc.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Throttle Lock

Throttle

Lock-out

Throttle

Trigger

1.Move the ON/OFF switch to the ON posi- tion.

2.Engage the throttle lock as follows: D press the throttle lock--out;

D squeeze and hold throttle trigger; D press and hold throttle lock, then D release the throttle trigger

NOTE: Keep the throttle lock engaged until the engine starts.

ON OFF

Switch

3.Slowly press the primer bulb 6 times.

4.Move the choke lever to the FULLCHOKE position.

Primer Bulb

Choke

 

 

Lever

5.Pull starter rope handle sharply until en- gine sounds as if it is trying to run, but do not pull rope more than 6 times.

6.Move the choke lever to the HALF CHOKE position.

7.Pull starter rope sharply until the engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), check to make sure the ON/OFF switch is in the ON position. Move the choke lever to the FULL CHOKE position and press the primer bulb 6 times; pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter rope until the engine runs, but no more than 6 more pulls. If the engine still doesn’t start, it is probably flooded. Pro- ceed to STARTING A FLOODED EN- GINE.

8.Once the engine starts, allow the engine to run 10 seconds, then move the choke lever to the OFF CHOKE position. Allow the unit to run for 30 more seconds at the OFF CHOKE position before squeezing and releasing the throttle trigger to release the throttle lock.

NOTE: If engine dies with the choke lever in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until the engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move the ON/OFF switch to the ON posi- tion.

2.Slowly press the primer bulb 6 times.

3.Move the choke lever to the HALF CHOKE position.

4.Engage the throttle lock as directed in

STARTING A COLD ENGINE.

NOTE: Keep the throttle lock engaged until the engine starts.

5.Pull starter rope sharply until engine runs, but no more than 5 pulls.

6.Allow the engine to run 10 seconds, then move the choke lever to the OFF CHOKE position.

7.Release the throttle lock by squeezing and releasing the trigger.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

-- 5 --

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 10/9/03 530163353Plan Ahead Know Your UnitHandle Fuel with Caution Operate Your Unit SafelyAssembly Know Your Hedge Trimmer ON/OFF Switch Primer BulbChoke Throttle TriggerStarting a Warm Engine Stopping Your EngineStarting Your Engine Clean AIR Filter Inspect and Clean Unit and LabelsCarburetor Adjustment Starting a Flooded EngineReplace Spark Plug Need Service PARTS?Replace Fuel Filter Seasonal StorageLoad Adjustment Troubleshooting Table Cause RemedyCarbon build-up on Muffler outlet screen Compression lowElectrolux Home PRODUCTS, INC Ranty. Emission Control Warranty Parts. HOW to File a Claim If you have

530163353 specifications

The Weed Eater 530163353 is a versatile and efficient solution for those seeking a reliable string trimmer for their gardening and landscaping needs. Designed to tackle a variety of outdoor tasks, this trimmer combines power, convenience, and technology to deliver exceptional performance.

One of the main features of the Weed Eater 530163353 is its lightweight design, which makes it easier for users to maneuver and operate for extended periods without fatigue. Weighing in at a modest level, this trimmer is perfect for both homeowners and professional landscapers who require an efficient tool for maintaining lawns and gardens.

Power is a crucial aspect of any string trimmer, and the Weed Eater 530163353 does not disappoint. Equipped with a reliable gas engine, it provides ample cutting power, allowing users to tackle tough weeds and thick grass with ease. The engine's design ensures consistent performance while maintaining fuel efficiency, meaning users can get more done without constantly refueling.

One of the standout features of the Weed Eater 530163353 is its innovative automatic feed system. This technology allows for seamless line advancement, meaning the trimmer will automatically release more line as needed while in use. This eliminates the need to stop and manually adjust the line, ensuring a smooth and uninterrupted trimming experience. The result is a more efficient trimming process that saves time and energy.

In addition to its powerful engine and automatic feed system, the Weed Eater 530163353 is designed with user comfort in mind. The ergonomic handle provides a comfortable grip, reducing strain on the hands and wrists during extended use. Furthermore, the adjustable shaft length allows users to customize the trimmer to their height, promoting good posture and reducing fatigue.

Durability is another key characteristic of the Weed Eater 530163353. Built with high-quality materials, this trimmer is designed to withstand the rigors of outdoor use. Its rugged construction ensures that it can handle tough conditions and provide reliable performance over time.

With its combination of power, efficiency, and user-friendly features, the Weed Eater 530163353 is an excellent choice for anyone looking to maintain their yard or garden. Whether you are a homeowner seeking to keep your lawn pristine or a professional landscaper in need of a reliable tool, this string trimmer offers everything you need to get the job done effectively.
Top Page Image Contents