Know Your Unit, Plan Ahead | Weed Eater 530163353 specification

WARNING: Failure to follow all Safety Rules and Precautions can result in serious injury.

DANGER: THIS POWER TOOL CAN

BE DANGEROUS! This unit can cause serious injury including amputation or blindness to the operator and others. The warnings and safety instructions in this manual must be followed to provide reasonable safety and efficiency in us- ing this unit. The operator is responsible for fol- lowing the warnings and instructions in this manual and on the unit. Never allow children to use this tool.

KNOW YOUR UNIT

SRead your instruction manual carefully until you completely understand and can follow all warnings and safety rules before operat-

ing the unit.

DRestrict unit to users who understand and will follow all warnings and safety rules in this manual and on the unit.

PLAN AHEAD

WARNING: Inspect area before start- ing unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can rico- chet, be thrown, or otherwise cause injury or damage during operation.

DAlways wear eye protection when operating, servicing, or performing maintenance on unit. Wearing eye protection will help to prevent brush or debris from being thrown or ricochet- ing into eyes and face which can result in blindness and/or serious injury. Eye protec- tion should be marked Z87.

D Wear hearing protection when using this unit.

DSecure hair above shoulder length. Secure or remove jewelry, loose clothing, or cloth- ing with loosely hanging straps, ties, tas- sels, etc. They can be caught in moving

parts.

DStay alert. Do not operate unit when you are tired, ill, upset, or if you are under the influence of alcohol, drugs, or medication.

D Keep children, bystanders, and animals away from work area a minimum of 30 feet (10 meters) when starting or operating unit.

HANDLE FUEL WITH CAUTION

DEliminate all sources of sparks or flame (in- cluding smoking, open flames, or work that can cause sparks) in the areas where fuel is mixed, poured, or stored.

DMix and pour fuel in an outdoor area; store fuel in a cool, dry, well ventilated place; use an approved, marked container for all fuel

purposes.

DDo not smoke while handling fuel or while operating the unit.

DDo not fill fuel tank while engine is running. D Make sure the unit is properly assembled

and in good operating condition.

DAvoid spilling fuel or oil. Wipe up fuel spills before starting the engine.

DMove at least 10 feet (3 meters) away from fuel and fueling site before starting engine.

D Always store gasoline in a container ap- proved for flammable liquids.

OPERATE YOUR UNIT SAFELY

DANGER: RISK OF CUT; KEEP HANDS AWAY FROM BLADE--Blade

moves momentarily after the trigger is re- leased. Do not attempt to clear away cut ma- terial when the blade is in motion. Make sure the switch is in the OFF position, the spark plug wire is disconnected, and the blade has stopped moving before removing jammed material from the cutting blade. Do not grab or hold the unit by the cutting blade.

D Inspect unit before each use for worn, loose, missing, or damaged parts. Do not use until unit is in proper working order.

D Keep outside surfaces free from oil and fuel.

D Never start or run engine inside a closed room or building. Breathing exhaust fumes can kill.

DAvoid dangerous environments. Do not use in unventilated areas or where explosive vapors or carbon monoxide build up could be present.

DDo not overreach or use from unstable sur- faces such as ladders, trees, steep slopes, rooftops, etc. Keep firm footing and balance

at all times.

DDo not raise unit above your shoulders; the cutting blade can come dangerously close

to your body.

DAlways keep unit in front of your body. Keep all parts of your body away from the cutting blade.

D Keep the cutting blade and air vents free from debris.

DUse only for jobs explained in this manual.

MAINTAIN YOUR UNIT PROPERLY

D Have all maintenance other than the rec- ommended procedures described in the in- struction manual performed by an autho- rized service dealer.

D Disconnect spark plug before performing maintenance except for carburetor adjust- ments.

D Do not use a cutting blade that is bent, warped, cracked, broken, or damaged in any other way. Have worn or damaged parts replaced by an authorized service dealer.

DUse only recommended Weed Eater! cut- ting blades and replacement parts; use of any other parts may void your warranty and cause damage to your unit.

DEmpty fuel tank before storing the unit. Use up fuel left in carburetor by starting engine and

letting it run until it stops.

DHand carry the unit with the engine stopped and the muffler and cutting blade away from your body.

DAllow engine to cool, empty the fuel tank, and secure the unit before storing or trans- porting it in a vehicle.

-- 2 --

530163353 specifications

The Weed Eater 530163353 is a versatile and efficient solution for those seeking a reliable string trimmer for their gardening and landscaping needs. Designed to tackle a variety of outdoor tasks, this trimmer combines power, convenience, and technology to deliver exceptional performance.

One of the main features of the Weed Eater 530163353 is its lightweight design, which makes it easier for users to maneuver and operate for extended periods without fatigue. Weighing in at a modest level, this trimmer is perfect for both homeowners and professional landscapers who require an efficient tool for maintaining lawns and gardens.

Power is a crucial aspect of any string trimmer, and the Weed Eater 530163353 does not disappoint. Equipped with a reliable gas engine, it provides ample cutting power, allowing users to tackle tough weeds and thick grass with ease. The engine's design ensures consistent performance while maintaining fuel efficiency, meaning users can get more done without constantly refueling.

One of the standout features of the Weed Eater 530163353 is its innovative automatic feed system. This technology allows for seamless line advancement, meaning the trimmer will automatically release more line as needed while in use. This eliminates the need to stop and manually adjust the line, ensuring a smooth and uninterrupted trimming experience. The result is a more efficient trimming process that saves time and energy.

In addition to its powerful engine and automatic feed system, the Weed Eater 530163353 is designed with user comfort in mind. The ergonomic handle provides a comfortable grip, reducing strain on the hands and wrists during extended use. Furthermore, the adjustable shaft length allows users to customize the trimmer to their height, promoting good posture and reducing fatigue.

Durability is another key characteristic of the Weed Eater 530163353. Built with high-quality materials, this trimmer is designed to withstand the rigors of outdoor use. Its rugged construction ensures that it can handle tough conditions and provide reliable performance over time.

With its combination of power, efficiency, and user-friendly features, the Weed Eater 530163353 is an excellent choice for anyone looking to maintain their yard or garden. Whether you are a homeowner seeking to keep your lawn pristine or a professional landscaper in need of a reliable tool, this string trimmer offers everything you need to get the job done effectively.