Weed Eater 530163353 Starting a Flooded Engine, General Recommendations, Clean AIR Filter

Page 6

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the ON/OFF switch in the ON position and the choke lever in the OFF CHOKE position and engaging the throttle lock as directed in the STARTING A COLD ENGINE section; then, pull the rope to clear the engine of excess fuel. Starting could require pulling the starter rope many times depending on how badly the unit is flooded. If the unit still doesn’t start, refer to the TROUBLESHOOTING TABLE or call 1-800-554-6723.

WARNING: Ensure ON/OFF switch is in the OFF position and disconnect the spark plug before performing maintenance except for carburetor adjustments.

GENERAL RECOMMENDATIONS

Thewarranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/OFF Switch -- Ensure ON/OFF switch functions properly by moving the switch to the OFF position. Make sure engine stops; then restart engine and continue.

SFuel Tank -- Do not use unit if fuel tank shows signs of damage or leaks.

INSPECT AND CLEAN UNIT AND LABELS

SBefore and after each use, inspect com- plete unit for loose or damaged parts. After each use, clean the unit and labels using a

damp cloth with a mild detergent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

Air Filter

Cover

Air Filter

Screw

Cleaning the air filter:

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the cover and the area around it to keep debris from falling into the carburetor chamber when the cover is removed.

2.Remove parts as illustrated.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze filter to distribute oil.

6.Replace parts.

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

NOTE: THE SPARK ARRESTING SCREEN ON THIS UNIT IS NOT SERVICEABLE.

For normal homeowner use, the muffler and spark arresting screen will not require any ser- vice.

After 50 hours of use, we recommend that your muffler be replaced by an authorized service dealer.

CARBURETOR ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The blade will be moving during most of this procedure. Wear your protective equipment and observe all safety precautions. When making adjust- ments, use a screwdriver short enough to keep your hands behind the handguard and away from the blade. After making adjust- ments, the blade must not move at idle speed. The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

SEngine will not idle when the throttle is re-

leased.

SThe blade moves at idle.

Keep others away when making idle speed adjustments. Make adjustments with the unit resting on a level surface free of debris that can be caught in the hedge trimmer blade. Serious injury to the operator and others can occur if the carburetor is not properly ad- justed. Keep all parts of your body away from the blade and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without blade moving (idle too fast) or en- gine stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speedif engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed if the blade moves at idle.

WARNING: Recheck the idle speed after each adjustment. The blade must not move at idle speed to avoid serious injury to the operator or others.

-- 6 --

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 530163353 10/9/03Handle Fuel with Caution Know Your UnitPlan Ahead Operate Your Unit SafelyAssembly Choke ON/OFF Switch Primer BulbKnow Your Hedge Trimmer Throttle TriggerStopping Your Engine Starting Your EngineStarting a Warm Engine Carburetor Adjustment Inspect and Clean Unit and LabelsClean AIR Filter Starting a Flooded EngineReplace Fuel Filter Need Service PARTS?Replace Spark Plug Seasonal StorageCarbon build-up on Troubleshooting Table Cause RemedyLoad Adjustment Muffler outlet screen Compression lowElectrolux Home PRODUCTS, INC Parts. HOW to File a Claim If you have Ranty. Emission Control Warranty

530163353 specifications

The Weed Eater 530163353 is a versatile and efficient solution for those seeking a reliable string trimmer for their gardening and landscaping needs. Designed to tackle a variety of outdoor tasks, this trimmer combines power, convenience, and technology to deliver exceptional performance.

One of the main features of the Weed Eater 530163353 is its lightweight design, which makes it easier for users to maneuver and operate for extended periods without fatigue. Weighing in at a modest level, this trimmer is perfect for both homeowners and professional landscapers who require an efficient tool for maintaining lawns and gardens.

Power is a crucial aspect of any string trimmer, and the Weed Eater 530163353 does not disappoint. Equipped with a reliable gas engine, it provides ample cutting power, allowing users to tackle tough weeds and thick grass with ease. The engine's design ensures consistent performance while maintaining fuel efficiency, meaning users can get more done without constantly refueling.

One of the standout features of the Weed Eater 530163353 is its innovative automatic feed system. This technology allows for seamless line advancement, meaning the trimmer will automatically release more line as needed while in use. This eliminates the need to stop and manually adjust the line, ensuring a smooth and uninterrupted trimming experience. The result is a more efficient trimming process that saves time and energy.

In addition to its powerful engine and automatic feed system, the Weed Eater 530163353 is designed with user comfort in mind. The ergonomic handle provides a comfortable grip, reducing strain on the hands and wrists during extended use. Furthermore, the adjustable shaft length allows users to customize the trimmer to their height, promoting good posture and reducing fatigue.

Durability is another key characteristic of the Weed Eater 530163353. Built with high-quality materials, this trimmer is designed to withstand the rigors of outdoor use. Its rugged construction ensures that it can handle tough conditions and provide reliable performance over time.

With its combination of power, efficiency, and user-friendly features, the Weed Eater 530163353 is an excellent choice for anyone looking to maintain their yard or garden. Whether you are a homeowner seeking to keep your lawn pristine or a professional landscaper in need of a reliable tool, this string trimmer offers everything you need to get the job done effectively.
Top Page Image Contents