Numark Industries AXIS 8 owner manual Program Functions Please Read

Page 16

AXIS 8

PROGRAM FUNCTIONS

 

PLEASE READ!!!!

This button provides several programmable functions depending upon the combination of buttons used.

Track Sequence Programming - Depress while the unit is stopped and “ ” will light. Select each track to be

programmed then press between selections. Press “PLAY/STUTTER” to start the track sequence program playing. To exit and

erase program hold for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.

The following functions will work by pressing followed by appropriate function while still holding the program button:

Effect Options - pressing program with an effect button will offer alternative options to that effect. In the case of the “SCRATCH”

effect the display will toggle between “ ” and “ ”. Not all effects offer options. More information on these options is available in the effects section of this manual.

End of track dead space elimination – this will give and option for eliminating the dead space at the end of tracks. The unit already automatically removes dead space at the beginning of tracks. End of track dead space elimination is useful if you are playing a CD

continuously and want to eliminate all the gaps between songs. The display will indicate “ ” when the function is set to

eliminate space and indicates “ “ when the unit is left to leave the natural space between tracks. This setting will be remembered at power down.

Cueing Style Selection – this will alternate the jog wheel cue function from a smooth “scratch” sound to the tradition “stutter” sound

modes during cue operations. The display will indicate “ ” when the “scratch” style is active. This indication will go away when the style of cue is stutter. This setting will be remembered at power down.

Brake Speed – this allows you to adjust the speed of ‘PAUSE”, or braking. Press “PAUSE” then rotate the wheel until the desired

seconds of startup are shown. Pressing “PAUSE” twice will toggle startup from “ ” to the desired seconds.

Startup Speed – this allows you to adjust the startup speed of initial play. Press “PLAY/STUTTER” then rotate the wheel until the desired seconds of startup are shown. The “STUTTER” function will not be affected. Pressing “PLAY/STUTTER” twice will toggle

startup between “ ” and the desired seconds.

Relay time – this gives options for the amount of time used for relaying between tracks on two connected units. Options will appear to relay immediately after the track (0), with time added of 1, 2, or 3 seconds (1,2,3), or a reduction of 1,2, or 3 seconds (-1,-2,-3). By reducing time the attached CD player will start playing before the end of a track, creating an automatic segue. This feature will also work in track sequence program mode; however, if the units are also in SINGLE mode the same number of tracks programmed should be the same. Play will stop at the end of the last track. This setting will be remembered at power down.

Remote Start – The sets the mode for the “remote” jack on the rear of the unit. Details can be found in the relay and remote start sections of this manual.

Automatic door close protection – this option automatically closes the door at the specified time. The display will indicate 30 seconds, 60 seconds, 120 seconds, and (no) for no auto close. This setting will be remembered at power down.

Digital Output – This actives digital output and allows digital audio information to be extracted from the unit. Some tracks also have other information encoded in the original audio output such as CDG graphic CDs for Karaoke. – *Please see Specifications Page 19

for important manufacturer information.

Smart Looping – When active the display will indicate “ ” and all looping and stuttering will follow the beat of the music based upon the Beatkeeper information.

Sleep Mode – The unit will automatically enter sleep mode after 15 minutes of inactivity. In this mode the unit will still start instantly from buffer, however, the laser will turn off to extend it’s life. If this feature is undesirable, then it can be turned off. This setting will be remembered at power down.

- The Leader in DJ Technology

©2002 Numark Industries

- 16 -

http://www.numark.com

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Owner Manual Safety Instructions Table of Contents Axis Setup and Connections Line Voltage SelectionFeatures Track SELECT/SEARCH- Rotation selects tracksDisplay Features Basic Operations Setting CUE Points Editing CUE PointKEY Lock / KEY Change Adjusting PitchBeatkeeper Using Pitch Bend Matching the Beats PER Minute BPMLooping Operations LoopingLoop Loop OUTMoving Loop Points RELOOP/STUTTERSpecial Effects EffectsAxis Program Functions Please Read Relay Play Remote Switch StartFader Start CUE/LOOP Point Storage and Recall To Save Cue and Loop points on the current CDAudio CD Programming Procedure Upgrading Your UnitMidi IN-OUT Midi Implementation Chart Before Switching OFF the Power TroubleshootingSpecifications Professional Disc Jockey Products

AXIS 8 specifications

Numark Industries has established itself as a cornerstone in the world of DJ equipment, and the AXIS 8 stands as a testament to the brand’s commitment to innovation and quality. The AXIS 8 is a versatile digital turntable that is designed to cater to the needs of both novice and professional DJs. This piece of equipment embodies a mix of cutting-edge technology and user-friendly features, making it a powerful tool for live performances and studio use alike.

One of the standout features of the AXIS 8 is its direct drive motor. This motor technology delivers a consistent and high-torque performance, allowing for precise control and quick start-up times. This means DJs can effortlessly scratch, mix, and match beats without the lag that can sometimes accompany belt-driven turntables. The adjustable pitch control gives users the flexibility to fine-tune their tracks, providing a professional edge when mixing live.

Additionally, the AXIS 8 is equipped with a USB output, allowing for seamless connectivity to computers and digital audio workstations. This feature enables DJs to digitize their vinyl collections or utilize digital audio files directly, offering flexibility in their music library. With the AXIS 8, DJs can create and manipulate their sound in real time, leading to a dynamic and immersive performance.

The build quality of the AXIS 8 also deserves attention. Constructed with durable materials, the turntable is designed to withstand the rigors of frequent use. The sleek, modern design ensures that it not only performs well but also looks great in any setup. The integrated audio interface further enhances usability, providing high-quality sound output without the need for additional equipment.

The AXIS 8 also incorporates an adjustable anti-skate feature, enhancing accuracy when mixing and scratching. This attention to detail ensures that the stylus maintains optimal contact with the record groove, minimizing wear and tear while maximizing sound fidelity.

Overall, the Numark Industries AXIS 8 represents a perfect blend of technology and artistry, tailored for DJs who value performance, reliability, and sophistication. Whether in a club setting or a home studio, the AXIS 8 promises to elevate the DJ experience and inspire creativity.
Top Page Image Contents