Display Features

AXIS 8

25.Power Switch- Turn on and turn off the machine with this button. The unit should always be shut down with this button first before any external power is removed. Typically it is recommended that the CD player is powered on before amplifiers and off after amplifiers to avoid an audio spike to be sent through your equipment.

26.IEC Power Plug Connector - Plug your supplied power cord in here.

27.Voltage Selector - Set this switch to the voltage for your location.

28.RCA Audio Connectors - Connect your CD player to your mixer from this line level output.

29.Digital Output - The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). To active digital output, hold down “PROG” followed by “PITCH”. This allows digital audio information to be sent. Some CDs also have information encoded in the original audio output such as CDG graphic CDs for Karaoke.

30.Relay Connector- If you wish to use the relay function plug in your 3.5mm stereo control cables into here and then into your other unit. The cable must be a stereo style plug for the units to work properly

31.Remote Start Connector – Use this connector to plug into your fader start compatible mixer or remote switch. This function is always active.

To use this connector for fader start, connect the supplied fader start cable to a fader start compatible mixer. Every time you move the crossfader on the mixer over to the side that the unit is on, it will automatically start playing. When you move the fader away from that side, the unit will stop. Moving the fader back to the unit side will start play again.

Foot switches can also be attached to this jack for creative mixing techniques and can be found in most music shops. Connector plugs are often ¼” and an adapter to 1/8” will be needed for connection. There are also two types of footswitches that will work with this connector. The first is a typical, on/off pushbutton switch and are generally used for switching channels on guitar amps. The second switch is a momentary footswitch and is usually used for keyboard sustain pedals.

32.MIDI IN Connector – The port is for receiving MIDI (Musical Instrument Digital Interface) signals from other MIDI devices such as CD players, Keyboards, or Drum machines.

33.MIDI OUT Connector –The port is for sending MIDI signals to other MIDI devices .

1.PLAY - Active while the unit is actually playing a CD.

2.PAUSE - Active when the unit is paused.

3.CUE - Flashing when the unit is setting a cue point. Active when the unit is paused at a cue point.

4.SCRATCH – indicates when the wheel will cue as a smooth transition over the music creating a scratch effect. When not lit the wheel will cue in the customary stutter style.

5.SINGLE - Shows when the unit is set to play just one track at a time.

6.TRACK - Shows the track that the unit is playing.

7.PROGRAM – On when a sequence of songs is preprogrammed into the unit.

8.TOTAL TRACK – shows number of tracks available on the CD.

9.MINUTES - Shows the minutes elapsed or remaining depending on mode setting.

10.SECONDS - Shows the seconds elapsed or remaining depending on mode setting.

11.FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting.

12.BPM – Indicates the current BPM.

13.KEY – Lights when key effects are active and indicates key position.

14.LOCK – Lights when key has been locked

15.PITCH – Shows current pitch position.

16.TIME MODE (TOTAL) indicates when full CD remain time is showing.

17.TIME MODE (REMAIN) shows how much time is left on a particular track.

18.TIME BAR - Shows either track time remaining, total CD time remaining or track elapsed time depending on the setting of the “TIME” button.

19.TIME MODE (ELAPSED) is for showing time as it is taking place.

20.SEARCH – Shows when the wheel is active for the search effect.

21.AUTOSTART- Indicates when the CD is set to relay.

22.HOT – Active when hot points have been set.

23.LOOP INDICATOR – Activates as loops are playing.

24.1,2 – Indicates which hot points or loops are set.

25.EFFECT – indicates when wheel is in effect mode.

26.HOLD – indicates when effects are being held in position.

27.EFFECT PARAMETER – Shows the current effect setting.

28.MASTER/SLAVE – indicates unit dominance in MIDI interlock functions

- The Leader in DJ Technology

- 7 -

http://www.numark.com

AXIS 8 specifications

Numark Industries has established itself as a cornerstone in the world of DJ equipment, and the AXIS 8 stands as a testament to the brand’s commitment to innovation and quality. The AXIS 8 is a versatile digital turntable that is designed to cater to the needs of both novice and professional DJs. This piece of equipment embodies a mix of cutting-edge technology and user-friendly features, making it a powerful tool for live performances and studio use alike.

One of the standout features of the AXIS 8 is its direct drive motor. This motor technology delivers a consistent and high-torque performance, allowing for precise control and quick start-up times. This means DJs can effortlessly scratch, mix, and match beats without the lag that can sometimes accompany belt-driven turntables. The adjustable pitch control gives users the flexibility to fine-tune their tracks, providing a professional edge when mixing live.

Additionally, the AXIS 8 is equipped with a USB output, allowing for seamless connectivity to computers and digital audio workstations. This feature enables DJs to digitize their vinyl collections or utilize digital audio files directly, offering flexibility in their music library. With the AXIS 8, DJs can create and manipulate their sound in real time, leading to a dynamic and immersive performance.

The build quality of the AXIS 8 also deserves attention. Constructed with durable materials, the turntable is designed to withstand the rigors of frequent use. The sleek, modern design ensures that it not only performs well but also looks great in any setup. The integrated audio interface further enhances usability, providing high-quality sound output without the need for additional equipment.

The AXIS 8 also incorporates an adjustable anti-skate feature, enhancing accuracy when mixing and scratching. This attention to detail ensures that the stylus maintains optimal contact with the record groove, minimizing wear and tear while maximizing sound fidelity.

Overall, the Numark Industries AXIS 8 represents a perfect blend of technology and artistry, tailored for DJs who value performance, reliability, and sophistication. Whether in a club setting or a home studio, the AXIS 8 promises to elevate the DJ experience and inspire creativity.