Numark Industries AXIS 8 owner manual Safety Instructions

Page 2

AXIS 8

SAFETY INSTRUCTIONS

a)Read Instructions - All the safety and operating instructions should be read before this product is connected and used.

b)Retain Instructions - The safety and operating instructions should be kept for future reference.

c)Heed Warnings - All warnings on this product and in these operating instructions should be followed.

d)Follow Instructions - All operating and other instructions should be followed.

e)Placement – place the unit in a clean dry location.

f)Water and Moisture - This product should be kept away from direct contact with liquids. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

g)Temperature- Avoid placing this product to close to any high heat sources such as radiators. Do not use this unit at temperatures below 41°F/5°C or higher than 95°F/35°C.

h)Ventilation - The appliance should be situated so that it’s location or position does not interfere with it’s proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation opening; or, placed in a built-installation, such as bookcase or cabinet that may impede the flow of air through the ventilation openings.

i)Power Sources - This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.

j)Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them. When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord.

k)Object and Liquid Entry - Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer.

l)Cleaning – The appliance should be cleaned only as recommended by the manufacturer. Do not use chemical solvents to clean the unit.

m)Non-use Periods – The power cord of the appliance should be unplugged from the outlet when left unused for long periods of time.

n)Damage Requiring Service - Only qualified personnel should service this product. If you have any questions about service please contact Numark at the number(s) shown on the back cover of this manual.

o)Grounding or Polarization - Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated.

p)Internal/External Voltage Selectors - Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.

q)Carts and StandsThe appliance should be used only with a cart or stand

that is recommended by the manufacturer of the cart or stand. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

SERVICE INSTRUCTIONS

Disconnect power cord before servicing

Replace critical components only with factory parts or recommended equivalents

For AC line powered units - Before returning repaired unit to user, use an ohmmeter to measure from both AC plug blades to all exposed metallic parts. The resistance should be no more than 100,000ohms.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE ANY COVER. NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL ONLY.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.

CAUTION

FOR USA & CANADIAN MODELS ONLY TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.

NOTICE CONCERNING FCC REGULATIONS

This equipment generates and uses radio frequency energy and may cause interference to radio and television reception if you do not operate it in strict accordance with the procedures detailed in this OPERATING MANUAL. This unit complies with Class B computing device rules in accordance with the specifications in Sub-part J or Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. There is no guarantee, however, that interference will not occur in a particular installation. If the unit does cause interference to any radio or television reception, try to reduce it by one or more of the following means:

a)Reposition the other unit and/or its antennae

b)Move this unit

c)Move this unit and the other unit(s) further apart

d)Plug this unit into a different AC outlet so that it is on a different circuit from the other equipment.

This note is in accordance with Section 15.838 of the FCC Rules.

This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications.

DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK

FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM.

USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE

DOUBLE INSULATED - When servicing use only identical replacement parts

For 220-volt use in USA, use NEMA style 220-volt plug. For other countries use proper plug for local outlet.

- The Leader in DJ Technology

©2002 Numark Industries

- 2 -

http://www.numark.com

Image 2
Contents Owner Manual Safety Instructions Table of Contents Axis Setup and Connections Line Voltage SelectionFeatures Track SELECT/SEARCH- Rotation selects tracksDisplay Features Basic Operations Setting CUE Points Editing CUE PointBeatkeeper Adjusting PitchKEY Lock / KEY Change Using Pitch Bend Matching the Beats PER Minute BPMLoop Looping OperationsLooping Loop OUTMoving Loop Points RELOOP/STUTTERSpecial Effects EffectsAxis Program Functions Please Read Fader Start Remote Switch StartRelay Play CUE/LOOP Point Storage and Recall To Save Cue and Loop points on the current CDAudio CD Programming Procedure Upgrading Your UnitMidi IN-OUT Midi Implementation Chart Before Switching OFF the Power TroubleshootingSpecifications Professional Disc Jockey Products

AXIS 8 specifications

Numark Industries has established itself as a cornerstone in the world of DJ equipment, and the AXIS 8 stands as a testament to the brand’s commitment to innovation and quality. The AXIS 8 is a versatile digital turntable that is designed to cater to the needs of both novice and professional DJs. This piece of equipment embodies a mix of cutting-edge technology and user-friendly features, making it a powerful tool for live performances and studio use alike.

One of the standout features of the AXIS 8 is its direct drive motor. This motor technology delivers a consistent and high-torque performance, allowing for precise control and quick start-up times. This means DJs can effortlessly scratch, mix, and match beats without the lag that can sometimes accompany belt-driven turntables. The adjustable pitch control gives users the flexibility to fine-tune their tracks, providing a professional edge when mixing live.

Additionally, the AXIS 8 is equipped with a USB output, allowing for seamless connectivity to computers and digital audio workstations. This feature enables DJs to digitize their vinyl collections or utilize digital audio files directly, offering flexibility in their music library. With the AXIS 8, DJs can create and manipulate their sound in real time, leading to a dynamic and immersive performance.

The build quality of the AXIS 8 also deserves attention. Constructed with durable materials, the turntable is designed to withstand the rigors of frequent use. The sleek, modern design ensures that it not only performs well but also looks great in any setup. The integrated audio interface further enhances usability, providing high-quality sound output without the need for additional equipment.

The AXIS 8 also incorporates an adjustable anti-skate feature, enhancing accuracy when mixing and scratching. This attention to detail ensures that the stylus maintains optimal contact with the record groove, minimizing wear and tear while maximizing sound fidelity.

Overall, the Numark Industries AXIS 8 represents a perfect blend of technology and artistry, tailored for DJs who value performance, reliability, and sophistication. Whether in a club setting or a home studio, the AXIS 8 promises to elevate the DJ experience and inspire creativity.