McCulloch Aug-42 Important points, Types of Cutting Used for Bucking, Bucking Without a Support

Page 12

Important points

SCut only one log at a time.

SCut shattered wood very carefully; sharp pieces of wood could be flung toward oper- ator.

SUse a sawhorse to cut small logs. Never allow another person to hold the log while cutting and never hold the log with your leg

or foot.

SDo not cut in an area where logs, limbs, and roots are tangled. Drag the logs into a clear area before cutting by pulling out ex- posed and cleared logs first.

TYPES OF CUTTING USED FOR BUCKING

WARNING: If saw becomes pinched or hung in a log, don’t try to force it out. You can lose control of the saw resulting in injury and/or damage to the saw. Stop the saw, drive a wedge of plastic or wood into the cut until the saw can be removed easily. Restart the saw and carefully reenter the cut. Do not attempt to restart your saw when it is pinched or hung in a log.

Turn saw OFF and use a plastic or wooden wedge to force cut open.

Overcutting begins on the top side of the log with the saw against the log. When overcut- ting use light downward pressure.

Overcutting

Undercutting

Undercutting involves cutting on the under- side of the log with top of saw against the log. When undercutting use light upward pres- sure. Hold saw firmly and maintain control. The saw will tend to push back toward you.

WARNING: Never turn saw upside down to undercut. The saw cannot be con- trolled in this position.

First cut on pressure side of log

Second cut

Second cut

First cut on pressure side of log

BUCKING WITHOUT A

SUPPORT

SOvercut through 1/3 of the diameter of the log.

SRoll the log over and finish with a second overcut.

SGive special attention to logs under strain to prevent the saw from pinching. Make the first cut on the pressure side to relieve the stress on the log.

BUCKING USING A LOG OR SUP- PORT STAND

SRemember your first cut is always on the pressure side of the log.

S Your first cut should extend 1/3 of the diameter of the log.

SFinish with your second cut.

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

Using a support stand 2nd Cut

1st Cut

1st Cut

2nd Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branched or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, plat- forms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Watch out for springpoles. Use extreme caution when cutting small size limbs. Slen- der material may catch the saw chain and be whipped toward you or pull you off balance.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Manuel D’INSTRUCTIONS BetriebsanweisungManual DE Instrucciones Identification What is WHAT? Identification of SymbolsON/STOP Safety Rules Plan AheadChain SAW Safety Equipment Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionKickback Reduce the Chance KickbackKickback Safety Features Maintain ControlWith the cutting chain Hand slips off the front handlebarAssembly Attaching the Bumper SpikeAttaching the BAR & Chain LoosenAdjusting the tension Adjusting WheelWheel Bar Knob Bar ToolOperating Your Unit Before Starting Engine BAR and Chain LubricationFueling Engine Chain BrakeCutting Methods Starting a Warm EngineChain Brake Important PointsTree Felling Techniques Felling Large TreesNotch CUT and Felling the Tree Cutting a Fallen TreeBucking Using a LOG or SUP- Port Stand Important pointsTypes of Cutting Used for Bucking Bucking Without a SupportService and Adjustments BAR MaintenanceLimbing PruningCarburetor Adjustment Spark PlugChain Sharpening Troubleshooting Table Cause Remedy StorageStore in a dry area out of the reach of chil- dren Long--term storageDeclaration of Conformity Technical Data Sheet Iida

Aug-42 specifications

The McCulloch Aug-42 is a remarkable piece of engineering that showcases innovation in the small engine and handheld power tool industry. This chainsaw, introduced by McCulloch, has made its mark for its reliability, efficiency, and ease of use, making it an excellent choice for both professional and amateur users.

At the heart of the Aug-42 is a powerful 42cc engine that provides optimal performance for cutting tasks. The engine's design emphasizes lightweight construction while maintaining durability, allowing for ease of maneuverability. This is especially beneficial for users who may be involved in lengthy cutting or trimming tasks, as the lightweight build reduces fatigue.

One of the standout features of the Aug-42 is its anti-vibration technology. This innovation significantly minimizes the vibrations felt by the user during operation, enhancing comfort and control. As a result, operators can work for extended periods without the discomfort typically associated with prolonged chainsaw use.

The Aug-42 also incorporates a strategized fuel delivery system that maximizes power while ensuring fuel efficiency. It features a catalytic muffler that not only reduces noise during operation but also lowers the emissions produced, making it a more environmentally responsible choice. This combination of power and eco-friendliness caters to today’s environmentally conscious consumers.

The chainsaw comes equipped with a side-access chain tensioning system. This allows users to adjust the chain tension without needing to remove the guide bar, resulting in quick and hassle-free adjustments in the field. This essential feature minimizes downtime and keeps the user focused on their task.

Safety is another priority in the design of the McCulloch Aug-42. It includes an automatic chain brake that halts the chain’s motion when unexpected movements occur, protecting the user from possible accidents. Additionally, the chainsaw has a comfortable grip handle designed to provide optimum control, even in wet conditions.

In summary, the McCulloch Aug-42 fuses power, efficiency, and safety into a robust, user-friendly package. Its advanced technologies, including anti-vibration systems, fuel efficiency features, and safety mechanisms, position it as a preferred choice for those needing a dependable chainsaw. Whether used for general yard work, tree trimming, or more significant outdoor projects, the Aug-42 stands as a testament to McCulloch’s commitment to quality and innovation in outdoor power equipment.
Top Page Image Contents