McCulloch Aug-42 instruction manual Safety Rules, Plan Ahead

Page 3

IDENTIFICATION OF SYMBOLS

Starting Reminder

Move ON/STOP switch to the ON position.

Slowly press primer bulb 6 times.

Pull choke/fast idle lever out to the full extent (to the FULL CHOKE posi- tion).

Pull the starter rope sharply 5 times with your right hand.

Push the choke/fast idle lever in to the HALF CHOKE position.

Pull the starter rope sharply with your right hand until the engine starts.

Chain Tensioning

Lift lever on bar knob and turn counterclockwise 1 turn to loosen clutch cover.

Turn adjusting wheel (downward direction) to tension chain until chain solidly contacts bottom of guide bar rail.

While lifting tip of guide bar, tight- en bar knob (clockwise) securely. Hand tighten only! Return lever on bar knob to original position.

SAFETY RULES

WARNING: Always disconnect spark plug wire and place wire where it can- not contact spark plug to prevent accidental starting when setting up, transporting, ad- justing or making repairs except carburetor adjustments.

Because a chain saw is a high-speed wood- cutting tool, special safety precautions must be observed to reduce the risk of accidents. Careless or improper use of this tool can cause serious injury.

PLAN AHEAD

S Read this manual carefully until you com- pletely understand and can follow all safety rules, precautions, and operating instruc- tions before attempting to use the unit.

SRestrict the use of your saw to adult users who understand and can follow safety rules, precautions, and operating instruc- tions found in this manual.

Hearing

Safety Hat

Protection

Eye

Snug

Protection

Heavy Duty

Fitting

Clothing

Gloves

Safety

Safety Chaps

Shoes

 

SWear protective gear. Always use steel-toed safety footwear with non-slip soles; snug-fit- ting clothing; heavy-duty, non-slip gloves; eye protection such as non-fogging, vented goggles or face screen; an approved safety hard hat; and sound barriers (ear plugs or mufflers) to protect your hearing. Secure hair above shoulder length.

S Always use approved hearing protection. Regular users should have hearing checked regularly as chain saw noise can damage hearing. Long--term exposure to noise can result in permanent hearing impairment.

3

Image 3
Contents Manuel D’INSTRUCTIONS BetriebsanweisungManual DE Instrucciones Identification What is WHAT? Identification of SymbolsON/STOP Plan Ahead Safety RulesOperate Your SAW Safely Chain SAW Safety EquipmentReduce the Chance Kickback Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackHand slips off the front handlebar Kickback Safety FeaturesMaintain Control With the cutting chainLoosen AssemblyAttaching the Bumper Spike Attaching the BAR & ChainBar Tool Adjusting the tensionAdjusting Wheel Wheel Bar KnobChain Brake Operating Your UnitBefore Starting Engine BAR and Chain Lubrication Fueling EngineImportant Points Cutting MethodsStarting a Warm Engine Chain BrakeCutting a Fallen Tree Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeBucking Without a Support Bucking Using a LOG or SUP- Port StandImportant points Types of Cutting Used for BuckingPruning Service and AdjustmentsBAR Maintenance LimbingCarburetor Adjustment Spark PlugChain Sharpening Long--term storage Troubleshooting Table Cause RemedyStorage Store in a dry area out of the reach of chil- drenDeclaration of Conformity Iida Technical Data Sheet

Aug-42 specifications

The McCulloch Aug-42 is a remarkable piece of engineering that showcases innovation in the small engine and handheld power tool industry. This chainsaw, introduced by McCulloch, has made its mark for its reliability, efficiency, and ease of use, making it an excellent choice for both professional and amateur users.

At the heart of the Aug-42 is a powerful 42cc engine that provides optimal performance for cutting tasks. The engine's design emphasizes lightweight construction while maintaining durability, allowing for ease of maneuverability. This is especially beneficial for users who may be involved in lengthy cutting or trimming tasks, as the lightweight build reduces fatigue.

One of the standout features of the Aug-42 is its anti-vibration technology. This innovation significantly minimizes the vibrations felt by the user during operation, enhancing comfort and control. As a result, operators can work for extended periods without the discomfort typically associated with prolonged chainsaw use.

The Aug-42 also incorporates a strategized fuel delivery system that maximizes power while ensuring fuel efficiency. It features a catalytic muffler that not only reduces noise during operation but also lowers the emissions produced, making it a more environmentally responsible choice. This combination of power and eco-friendliness caters to today’s environmentally conscious consumers.

The chainsaw comes equipped with a side-access chain tensioning system. This allows users to adjust the chain tension without needing to remove the guide bar, resulting in quick and hassle-free adjustments in the field. This essential feature minimizes downtime and keeps the user focused on their task.

Safety is another priority in the design of the McCulloch Aug-42. It includes an automatic chain brake that halts the chain’s motion when unexpected movements occur, protecting the user from possible accidents. Additionally, the chainsaw has a comfortable grip handle designed to provide optimum control, even in wet conditions.

In summary, the McCulloch Aug-42 fuses power, efficiency, and safety into a robust, user-friendly package. Its advanced technologies, including anti-vibration systems, fuel efficiency features, and safety mechanisms, position it as a preferred choice for those needing a dependable chainsaw. Whether used for general yard work, tree trimming, or more significant outdoor projects, the Aug-42 stands as a testament to McCulloch’s commitment to quality and innovation in outdoor power equipment.