Troy-Bilt 604 manual Operation, Cruise Control Button, Seat Adjustment Lever, CUP Holder

Page 11

CRUISE CONTROL BUTTON

The cruise control button is located on

the tractor dash panel to the left of the ignition switch. Push the cruise control

button while traveling forward at a desired speed. While holding the

button in, release pressure from the AutoDrive™ pedal. This will engage the cruise control and allow the tractor to remain at that speed without applying pressure to the AutoDrive™ pedal. Depress the brake pedal or the AutoDrive™ pedal to deactivate cruise

control. Refer to the OPERATION section of this manual for detailed instructions regarding the cruise control feature.

SEAT ADJUSTMENT LEVER

To adjust the seat forward or backward, slide the seat adjustment lever to the left and reposition the seat to the desired position. Once a comfortable position is found, release the seat adjustment lever to lock the seat in place. Refer to the ADJUSTMENTS section of this manual for more detailed instructions.

CUP HOLDER

The tractor’s cup holder is located on the fender to the left of the seat, just to the rear of the shift lever.

WARNING: Never operate the tractor under the influence of alcoholic beverages or drugs of any kind. Doing so can result in serious personal injury or death.

SECTION 8: OPERATION

SAFETY INTERLOCK SWITCHES

This tractor is equipped with a safety interlock system for the protection of the operator. If the interlock system should ever malfunction, do not operate the tractor. Contact an authorized MTD Service Dealer in your area. The safety interlock system prevents the engine from cranking or starting unless the brake pedal is fully depressed, and the PTO lever is in the disengaged (OFF) position.

•The safety interlock system will automatically shut off the engine if the operator leaves the seat before engaging the brake lock.

•The safety interlock system will automatically shut off the engine if the operator leaves the seat with the PTO lever in the engaged (ON) position, regardless of whether the brake lock is engaged. The PTO lever must be in the disengaged (OFF) position to restart the engine.

•The safety interlock system will automatically shut off the engine if the PTO lever is moved into the engaged (ON) position with the shift lever in the REVERSE position.

WARNING: Do NOT attempt to bypass or disconnect the tractor’s safety interlock. Doing so could result in serious personal injury or death.

IMPORTANT: Tampering with or attempting to bypass the tractors Safety Interlock Switches in any way WILL void your warranty.

WARNING

AVOID SERIOUS INJURY OR DEATH

•GO UP AND DOWN SLOPES, NOT ACROSS.

•AVOID SUDDEN TURNS.

•DO NOT OPERATE THE UNIT WHERE IT COULD SLIP OR TIP.

•IF MACHINE STOPS GOING UPHILL, STOP BLADE(S) AND BACK DOWNHILL SLOWLY.

•DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.

•NEVER CARRY CHILDREN.

•LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING.

•KEEP SAFETY DEVICES (GUARDS, SHIELDS, AND SWITCHES) IN PLACE AND WORKING.

•REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE(S).

•KNOW LOCATION AND FUNCTION OF ALL CONTROLS.

•BE SURE BLADE(S) AND ENGINE ARE STOPPED BEFORE PLAC- ING HANDS OR FEET NEAR BLADE(S).

•BEFORE LEAVING OPERATOR’S POSITION, DISENGAGE

BLADE(S), PLACE THE SHIFT LEVER IN NEUTRAL, ENGAGE BRAKE LOCK, SHUT ENGINE OFF AND REMOVE KEY.

READ OPERATOR’S MANUAL

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OPERATOR’S Manual Calling Customer Support Table of ContentsFinding Your Model Number General Operation Important Safe Operation PracticesChildren ServiceSlope Operation Do notSafety Labels found on your unit Or a Fence Post Slope GaugeTractor SET-UP Attachments & AccessoriesAttaching the Battery Cables Installing the Mulch KITControls Choke Control Ignition SwitchIndicator Monitor / Hour Meter Throttle Control LeverParking Brake Button PTO Power TAKE-OFF LeverLift Lever Autodrive PedalCruise Control Button Seat Adjustment LeverSafety Interlock Switches OperationStopping the Engine Setting the Cutting HeightSetting the Cruise Control Starting the EngineOperating the Headlights Using the Lift LeverEngaging the PTO Power TAKE-OFF Lever Driving on SlopesLeveling the Deck AdjustmentsMowing Front to Rear Seat AdjustmentSteering Adjustment PTO Power TAKE-OFF Adjustment Brake AdjustmentCarburetor Adjustment Changing Engine Oil MaintenanceEngine Front of Tractor Cleaning the Engine and DeckTo Lift Assembly Cutting Deck RemovalInch decks Changing the Deck BeltsLower Drive Belt Changing the Transmission Drive BeltsUpper Drive Belt Transmission Hole Cutting BladesCharging BatteryFuse Lubrication Trouble Possible Corrective Action Causes Troubleshooting GuidePart Description ModelElectrical System/Tractor Body Model Lift Assembly Model Steering Assembly Model Drive System 447 Power Take-off System Inch Deck Cutting Decks Briggs & Stratton Intek Twin Briggs & Stratton Intek Single Engine AccessoriesMANUFACTURER’S Limited Warranty for

604 specifications

The Troy-Bilt 604 is a versatile and reliable piece of equipment designed to meet the needs of homeowners and landscapers alike. Known for its robust performance and innovative features, this model stands out in the market for those requiring efficient yard maintenance.

One of the standout characteristics of the Troy-Bilt 604 is its powerful engine. Equipped with a reliable 4-cycle engine, it offers ample power for tackling various outdoor tasks, including cultivating, tilling, and soil preparation. This strong engine not only ensures performance but also translates into longevity, allowing users to depend on it for several seasons.

Another notable feature of the Troy-Bilt 604 is its patented front-tine design. This design provides excellent maneuverability in tight spaces, making it easier to work around garden beds and landscaping features. The adjustable tilling width is also a significant advantage, allowing users to switch between a narrow and wide tilling path based on their specific project needs. This flexibility helps optimize efficiency while minimizing time spent on each task.

The Troy-Bilt 604 incorporates advanced technologies that further enhance its functionality. For instance, the model is outfitted with easy-to-use controls, ensuring a user-friendly experience for both seasoned professionals and novice gardeners. The adjustable handlebars can be tailored to different heights, promoting comfort and reducing fatigue during operation.

Durability is a key attribute of the Troy-Bilt 604. Built with high-quality materials and reinforced components, this tiller is designed to withstand the rigors of frequent use in diverse environments. Users can have confidence in the machine's ability to handle tough soil conditions, as well as its resistance to wear and tear.

In addition to its impressive performance, the Troy-Bilt 604 is also designed with maintenance in mind. Features like easy-access air filters and oil drain ports simplify routine maintenance tasks, ensuring that the equipment runs smoothly for years to come.

Overall, the Troy-Bilt 604 combines power, versatility, and durability, making it an excellent choice for anyone looking to enhance their landscaping efforts. Whether you are preparing a new garden bed, tilling soil for planting, or maintaining an existing landscape, the Troy-Bilt 604 provides a reliable solution that meets various gardening needs with ease and efficiency.
Top Page Image Contents