Troy-Bilt 604 manual Slope Operation, Do not, Children, Service

Page 4

Disengage all attachment clutches, thoroughly depress the brake pedal, and shift into neutral before attempting to start engine.

Your mower is designed to cut normal residential grass of a height no more than 10". Do not attempt to mow through unusually tall, dry grass (e.g., pasture) or piles of dry leaves. Debris may build up on the mower deck or contact the engine exhaust presenting a potential fire hazard.

2.SLOPE OPERATION

Slopes are a major factor related to loss of control and tip- over accidents which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

For your safety, use the slope gauge included as part of this manual to measure slopes before operating this unit on a sloped or hilly area. If the slope is greater than 15° as shown on the slope gauge, do not operate this unit on that area or serious injury could result.

DO:

Mow up and down slopes, not across.

Remove obstacles such as rocks, limbs, etc.

Watch for holes, ruts or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Use slow speed. Always keep machine in gear when going down slopes to take advantage of engine braking action.

Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability.

Use extra care with grass catchers or other attachments. These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction. Rapid engagement or braking could cause the front of the machine to lift and rapidly flip over backwards which could cause serious injury.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blade(s) and proceed slowly straight down the slope.

DO NOT:

Do not turn on slopes unless necessary; then, turn slowly and gradually downhill, if possible.

Do not mow near drop-offs, ditches or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

Do not use grass catcher on steep slopes.

3. CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that chil- dren will remain where you last saw them.

Keep children out of the mowing area and in watchful care of an adult other than the operator.

Be alert and turn machine off if children enter the area.

Before and when backing, look behind and down for small children.

Never carry children, even with the blades off. They may fall off and be seriously injured or interfere with the safe machine operation.

Never allow children under 14 years old to operate the machine. Children 14 years and over should only operate machine under close parental supervision and proper instruction.

Remove key when machine is unattended to prevent unauthorized operation.

Use extra care when approaching blind corners, shrubs, trees or other objects that may obscure your vision of a child or other hazard.

4.SERVICE

Use extreme care in handling gasoline and other fuels. They are extremely flammable and the vapors are explosive.

Use only an approved container.

Never remove fuel cap or add fuel with the engine running. Allow engine to cool at least two minutes before refueling.

Replace fuel cap securely and wipe off any spilled fuel before starting the engine as it may cause a fire or explosion.

Extinguish all cigarettes, cigars, pipes and other sources of ignition.

Never refuel the machine indoors because fuel vapors will accumulate in the area.

Never store the fuel container or machine inside where there is an open flame or spark, such as a gas hot water heater, space heater or furnace.

Never run a machine inside a closed area.

To reduce fire hazard, keep the machine free of grass, leaves or other debris build-up. Clean up oil or fuel spillage. Allow machine to cool at least 5 minutes before storing.

Before cleaning, repairing or inspecting, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the spark plug to prevent accidental starting.

Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e.g., excessive wear, bent, cracked). Replace with blade which meets original equipment specifications.

4

Image 4
Contents OPERATOR’S Manual Finding Your Model Number Table of ContentsCalling Customer Support Important Safe Operation Practices General OperationService Slope OperationDo not ChildrenSafety Labels found on your unit Slope Gauge Or a Fence PostAttachments & Accessories Attaching the Battery CablesInstalling the Mulch KIT Tractor SET-UPControls Ignition Switch Indicator Monitor / Hour MeterThrottle Control Lever Choke ControlPTO Power TAKE-OFF Lever Lift LeverAutodrive Pedal Parking Brake ButtonSeat Adjustment Lever Safety Interlock SwitchesOperation Cruise Control ButtonSetting the Cutting Height Setting the Cruise ControlStarting the Engine Stopping the EngineUsing the Lift Lever Engaging the PTO Power TAKE-OFF LeverDriving on Slopes Operating the HeadlightsMowing AdjustmentsLeveling the Deck Steering Adjustment Seat AdjustmentFront to Rear Carburetor Adjustment Brake AdjustmentPTO Power TAKE-OFF Adjustment Engine MaintenanceChanging Engine Oil Cleaning the Engine and Deck To Lift AssemblyCutting Deck Removal Front of TractorChanging the Deck Belts Inch decksUpper Drive Belt Changing the Transmission Drive BeltsLower Drive Belt Transmission Cutting Blades HoleFuse BatteryCharging Lubrication Troubleshooting Guide Trouble Possible Corrective Action CausesModel Part DescriptionElectrical System/Tractor Body Model Lift Assembly Model Steering Assembly Model Drive System 447 Power Take-off System Inch Deck Cutting Decks Briggs & Stratton Intek Twin Engine Accessories Briggs & Stratton Intek SingleMANUFACTURER’S Limited Warranty for

604 specifications

The Troy-Bilt 604 is a versatile and reliable piece of equipment designed to meet the needs of homeowners and landscapers alike. Known for its robust performance and innovative features, this model stands out in the market for those requiring efficient yard maintenance.

One of the standout characteristics of the Troy-Bilt 604 is its powerful engine. Equipped with a reliable 4-cycle engine, it offers ample power for tackling various outdoor tasks, including cultivating, tilling, and soil preparation. This strong engine not only ensures performance but also translates into longevity, allowing users to depend on it for several seasons.

Another notable feature of the Troy-Bilt 604 is its patented front-tine design. This design provides excellent maneuverability in tight spaces, making it easier to work around garden beds and landscaping features. The adjustable tilling width is also a significant advantage, allowing users to switch between a narrow and wide tilling path based on their specific project needs. This flexibility helps optimize efficiency while minimizing time spent on each task.

The Troy-Bilt 604 incorporates advanced technologies that further enhance its functionality. For instance, the model is outfitted with easy-to-use controls, ensuring a user-friendly experience for both seasoned professionals and novice gardeners. The adjustable handlebars can be tailored to different heights, promoting comfort and reducing fatigue during operation.

Durability is a key attribute of the Troy-Bilt 604. Built with high-quality materials and reinforced components, this tiller is designed to withstand the rigors of frequent use in diverse environments. Users can have confidence in the machine's ability to handle tough soil conditions, as well as its resistance to wear and tear.

In addition to its impressive performance, the Troy-Bilt 604 is also designed with maintenance in mind. Features like easy-access air filters and oil drain ports simplify routine maintenance tasks, ensuring that the equipment runs smoothly for years to come.

Overall, the Troy-Bilt 604 combines power, versatility, and durability, making it an excellent choice for anyone looking to enhance their landscaping efforts. Whether you are preparing a new garden bed, tilling soil for planting, or maintaining an existing landscape, the Troy-Bilt 604 provides a reliable solution that meets various gardening needs with ease and efficiency.