Troy-Bilt 030245 When Adding or Draining Fuel, When Starting Equipment, When Operating Equipment

Page 3

Section 1: Safety Rules

Using a generator indoors WILL KILL YOU IN MINUTES.

Exhaust contains carbon monoxide, a poison gas you cannot see or smell.

NEVER use in the home ONLY use outdoors and

or in partly enclosed far from open windows, areas such as garages. doors, and vents.

WARNING

Running generator gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide can cause nausea, fainting or death.

•Operate generator ONLY outdoors.

•Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

•DO NOT operate generator inside any building or enclosure (even if doors or windows are open), including the generator compartment of a recreational vehicle (RV).

WARNING

Generator produces powerful voltage.

Failure to isolate generator from power utility can result in death or injury to electric utility workers due to backfeed of electrical energy.

•When using generator for backup power, notify utility company. Use approved transfer equipment to isolate generator from electric utility.

•Use a ground fault circuit interrupter (GFCI) in any damp or highly conductive area, such as metal decking or steel work.

•DO NOT touch bare wires or receptacles.

•DO NOT use generator with electrical cords which are worn, frayed, bare or otherwise damaged.

•DO NOT operate generator in the rain or wet weather.

•DO NOT handle generator or electrical cords while standing in water, while barefoot, or while hands or feet are wet.

•DO NOT allow unqualified persons or children to operate or service generator.

WARNING

Fuel and its vapors are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

WHEN ADDING OR DRAINING FUEL

•Turn generator OFF and let it cool at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.

•Fill or drain fuel tank outdoors.

•DO NOT overfill tank. Allow space for fuel expansion.

•If fuel spills, wait until it evaporates before starting engine.

•Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources.

•DO NOT light a cigarette or smoke.

WHEN STARTING EQUIPMENT

•Ensure spark plug, muffler, fuel cap and air cleaner are in place.

•DO NOT crank engine with spark plug removed.

WHEN OPERATING EQUIPMENT

•Do not tip engine or equipment at angle which causes fuel to spill.

•This generator is not for use in mobile equipment or marine applications.

WHEN TRANSPORTING OR REPAIRING EQUIPMENT

•Transport/repair with fuel tank EMPTY or with fuel shutoff valve OFF.

•Disconnect spark plug wire.

WHEN STORING FUEL OR EQUIPMENT WITH FUEL IN TANK

•Store away from furnaces, stoves, water heaters, clothes dryers or other appliances that have pilot light or other ignition source because they can ignite fuel vapors.

WARNING

•This generator does not meet U. S. Coast Guard Regulation 33CFR-183 and should not be used on marine applications.

•Failure to use the appropriate U. S. Coast Guard approved generator could result in death or serious injury and/or property damage.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Questions? Preguntas? Helpline 1-888-611-6708 M-F8-5 CT Operator’s Manual / Manual del OperarioTable of Contents Safety RulesEquipment Description When Transporting or Repairing Equipment When Adding or Draining FuelWhen Starting Equipment When Operating EquipmentWhen Testing for Engine Spark When Adjusting or Making Repairs to Your GeneratorKnow Your Generator Features and Controls SectionUnpack the Generator AssemblyInstall Wheel Kit Refer to and install the wheel kit as followsAdd Engine Oil AssemblyWhen Adding Fuel Before Starting the EngineSystem Ground Using the GeneratorConnecting to a Building’s Electrical System Section OperationStarting the Engine Connecting Electrical LoadsOperation Operating Generator120/240 Volt AC, 30 Amp, Locking Receptacle ReceptaclesGenerator Adapter Cord SET Stopping the EngineExample Power ManagementDont Overload Generator CapacityMaintenance SpecificationsGeneral Maintenance Recommendations Engine Storage Storage SectionStorage Generator StorageSection Troubleshooting TroubleshootingProblem Cause Correction TROY-BILT Portable Generator Owner Warranty Policy Limited WarrantyConserve Estas Instrucciones Reglas de SeguridadCuando Opere EL Equipo Sección 1 Reglas de SeguridadCuando Añada Combustible O Vacíe EL Depósito Cuando Ponga EN Funcionamiento EL EquipoPrecaución Cuando Ajuste O Haga Reparaciones a SU GeneradorCuando Pruebe LA Bujía DEL Motor Tomacorriente con Dispositivo de Seguridad de Características y ControlesConozca SU Generador Tomacorriente Dobles de 120 Voltios AC, 20 AmpInstale el Juego de Ruedas MontajeMontaje Desembalaje del GeneradorAgregue Combustible Sección 3 MontajeAntes DE Darle Arranque AL Motor Agregar Aceite al MotorConexión al Sistema Eléctrico de un Edificio OperaciónUSO DEL Generador Tierra del SistemaConexion De Cargas Electricas Sección 4 OperaciónOperando EL Generador Encienda el MotorVolt AC, 20 Amp, Receptáculos Dobles Receptáculos PrecauciónJuego DE Cables DEL Adaptador DEL Generador Parado Del MotorEjemplo No Sobrecargue GeneradorCapacidad Control de la EnergíaMantenimiento EspecificacionesRecomendaciones Generales DE Mantenimiento Almacenando el Motor Diagnositicos DE AveríasAlmacenamiento Almacenando el GeneradorGarantía Limitada Período DE Garantía

030245 specifications

The Troy-Bilt 030245 is a highly regarded garden tiller, designed to meet the needs of both amateur gardeners and seasoned horticulturists. It combines power, innovation, and user-friendly features to make soil preparation an efficient and effective process.

One of the standout features of the Troy-Bilt 030245 is its robust engine. Equipped with a dependable 208cc OHV engine, it delivers the power necessary to tackle tough soil conditions. This engine not only provides ample torque but also ensures easy starts, allowing users to begin their gardening tasks without delay.

The tiller is designed with a versatile 16-inch tilling width, making it ideal for various gardening needs, from small gardens to larger plots. This width allows for efficient coverage while still being manageable in tighter spaces. Additionally, the adjustable tilling depth feature gives users control over their tilling operations, allowing them to prepare soil for seed planting or to aerate existing gardens effectively.

Another significant characteristic of the Troy-Bilt 030245 is its patented Forward and Reverse Tilling technology. This feature enables users to reverse the tiller easily, making it simpler to maneuver and providing excellent soil turning capabilities. The rear-tine tiller design is particularly beneficial for breaking new ground and turning compacted soil, ensuring an improved planting environment.

User comfort and ease of operation are also focal points of the Troy-Bilt 030245. The tiller comes with ergonomic handlebars that reduce fatigue during extended use. The adjustable handle design allows for customization to suit the user's height, enhancing control and comfort. Additionally, the heavy-duty, self-propelled tines facilitate movement through tough soil, reducing the physical strain on the operator.

The durable construction of the Troy-Bilt 030245 ensures longevity and reliable performance in various soil types. The reinforced steel frame and high-performance tines are built to withstand rigorous gardening tasks, making this tiller a long-term investment for any garden enthusiast.

In summary, the Troy-Bilt 030245 is a powerful and versatile tiller that combines advanced features and technologies aimed at enhancing the gardening experience. Its reliable engine, adjustable tilling width and depth, innovative tilling technology, and ergonomic design make it an excellent choice for gardeners seeking efficiency and effectiveness in their soil preparation tasks.
Top Page Image Contents