Hydraulic Troubleshooting

Problem		Cause		Remedy

Cylinder rod will not move	1.	Broken drive shaft.	1.	See authorized service dealer.
	2.	Shipping plugs left in hydraulic	2.	Disconnect hydraulic hoses, remove
		hoses.		shipping plugs, reconnect hoses.
	3.	Set screws in coupling not adjusted	3.	See operator’s manual for correct
		properly.		adjustment.
	4.	Loose shaft coupling.	4.	Correct engine/pump alignment as
				necessary.
	5.	Gear sections damaged.	5.	See authorized service dealer.
	6.	Damaged relief valve.	6.	See authorized service dealer.
	7.	Hydraulic lines blocked.	7.	Flush and clean hydraulic system.
	8.	Incorrect oil level.	8.	Check oil level.
	9.	Damaged directional valve.	9.	See authorized service dealer.
	10.	Blocked directional valve.	10.	Flush and clean hydraulic system.
Slow cylinder shaft speed	1.	Gear sections damaged.	1.	See authorized service dealer.
while extending and	2.	Excessive pump inlet vacuum.	2.	Make certain pump inlet hoses are clear
retracting.				and unblocked-use short, large
				diameter inlet hoses.
	3.	Slow engine speed.	3.	See authorized service dealer.
	4.	Damaged relief valve.	4.	See authorized service dealer.
	5.	Incorrect oil level.	5.	Check oil level.
	6.	Contaminated oil.	6.	Drain oil, clean reservoir, and refill.
	7.	Directional valve leaking internally.	7.	See authorized service dealer.
	8.	Internally damaged cylinder.	8.	See authorized service dealer.
Leaking cylinder	1.	Broken seals.	1.	See authorized service dealer.
	2.	Scored cylinder.	2.	See authorized service dealer.
Engine runs but wood will	1.	Small gear section damaged.	1.	See authorized service dealer.
not split or wood splits too	2.	Pump check valve leaking.	2.	See authorized service dealer.
slowly	3.	Excessive pump inlet vacuum.	3.	Make certain pump inlet hoses are clear
				and unblocked.
	4.	Incorrect oil level.	4.	Check oil level.
	5.	Contaminated oil.	5.	Drain oil, clean reservoir, and refill.
	6.	Directional valve leaking internally.	6.	See authorized service dealer.
	7.	Overloaded cylinder.	7.	Do not attempt to split wood against the
				grain.
	8.	Internally damaged cylinder.	8.	See authorized service dealer.
Engine stalls during	1.	Low horsepower/weak engine.	1.	See authorized service dealer.
splitting	2.	Overloaded cylinder.	2.	Do not attempt to split wood against the
				grain or see authorized service dealer.
Engine will not turn or	1.	Engine/pump misalignment.	1.	Correct alignment as necessary.
stalls under low load	2.	Frozen or seized pump.	2.	See authorized service dealer.
conditions	3.	Low horsepower/weak engine.	3.	See authorized service dealer.
	4.	Hydraulic lines blocked.	4.	Flush and clean hydraulic system.
	5.	Blocked directional valve.	5.	Flush and clean hydraulic system.
Leaking pump shaft seal	1.	Broken drive shaft.	1.	See authorized service dealer.
	2.	Engine/pump misalignment.	2.	Correct alignment as necessary.
	3.	Gear sections damaged.	3.	See authorized service dealer.
	4.	Poorly positioned shaft seal.	4.	See authorized service dealer.
	5.	Plugged oil breather.	5.	Make certain reservoir is properly
				vented.

NOTE: For repairs beyond those listed here, contact your nearest authorized service center.

LS275 specifications

The Troy-Bilt LS275 is a versatile and efficient rear-tine tiller designed to make gardening and landscaping tasks more manageable. This machine is particularly suited for homeowners with larger gardens who require reliable tilling and soil preparation capabilities.

One of the standout features of the LS275 is its powerful engine. Equipped with a 208cc OHV engine, this tiller offers ample power for breaking up tough soil, ensuring that you can tackle even the most challenging garden plots. Its reliable starting system allows users to get to work quickly, minimizing downtime.

A key aspect of the LS275 is its rear-tine design, which provides stability and allows for deeper tilling. This configuration offers improved control and maneuverability, particularly in tight spaces or when working in uneven terrain. The tilling width of 18 inches is ideal for typical garden sizes, while the adjustable tilling depth, ranging from 3 to 7 inches, enables users to customize the tilling process according to specific garden needs.

The Troy-Bilt LS275 is designed with user comfort and convenience in mind. Its adjustable handle can be tailored to suit users of varying heights, reducing strain during extended use. The lightweight construction, combined with the counter-rotating tines, ensures that the tiller can glide through the soil with ease, allowing for efficient operation and less fatigue.

The tines themselves are made from durable materials that are built to withstand the rigors of tough soil conditions. The counter-rotating action of the tines helps to break up hard-packed soil and incorporates organic matter effectively, contributing to healthier garden beds.

Another notable feature of the LS275 is its robust 6-inch rear wheels. These provide excellent traction and stability, making it easier to maneuver across different terrains while maintaining control over tilling depth and width.

Safety is also a priority with the LS275, featuring an easy-access throttle control and a safety guard that helps protect the user from debris.

Overall, the Troy-Bilt LS275 stands out for its power, efficiency, and user-friendly features, making it a great choice for both novice and experienced gardeners looking to optimize their soil preparation efforts. With its combination of reliability and performance, this tiller can help transform any garden into a thriving, productive space.

Hydraulic Troubleshooting

Problem

LS275 specifications