Operating Your LOG Splitter, Gas and Oil Fill-Up

SECTION 4: OPERATING YOUR LOG SPLITTER

WARNING: Read, understand, and follow all instructions and warnings on the machine and in this manual before operating.

WARNING: Wear leather work gloves, safety shoes, ear protection, and safety glasses when operating log splitter. Ensure safe footing.

Gas and Oil Fill-Up

•Service the engine with gasoline and oil as instructed in the engine manual packed with your log splitter. Read instructions carefully.

WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel machine indoors or while the engine is hot or running.

NOTE: Gasoline can be added to the engine when the log splitter is in either the horizontal or vertical position. However, there are less obstructions when the unit is in the vertical position.

Starting Engine

•Attach spark plug wire to spark plug. Make certain the metal cap on the end of the spark plug wire is fastened securely over metal tip of the spark plug.

•Turn the fuel valve to the ON position.

•Move choke lever to CHOKE position.

•Turn the throttle control lever to the FAST position.

•Grasp starter handle and pull rope out slowly until engine reaches start of compression cycle (rope will pull slightly harder at this point).

•Pull rope with a rapid, full arm stroke. Keep firm grip on starter handle. Let rope rewind slowly. Repeat until engine cranks.

•After engine starts, move choke lever to OFF position. Place throttle lever to the speed desired. For best performance, the engine is designed to be operated at the FAST throttle position.

•If weather is cold, run wedge up or down beam 6 to 8 times to circulate the hydraulic fluid.

WARNING: When starting a warm engine, the muffler and surrounding areas are hot and can cause a burn. Do not touch.

Before Each Use

•Remove the dipstick and check hydraulic fluid level. Refill if necessary.

•Check engine oil level. Refill if necessary.

•Fill up gasoline if necessary.

•Lubricate with engine oil the beam area where splitting wedge will slide. Do not use grease to lubricate. Make sure to lubricate both the front and the back of the beam face.

•Attach spark plug wire to the spark plug.

Using the Log Splitter

•Place the log splitter on level, dry ground.

•Place the beam in either the horizontal or vertical position and lock in place with the appropriate locking rod.

•Block the front and back of both wheels.

•Place the log against the end plate and only split wood in the direction of the grain.

•To stabilize the log, place your hand only on sides of log. Never place hand on the end between the log and the splitting wedge.

•Only one adult should stabilize the log and operate the control handle, so the operator has full control over the log and the splitting wedge.

Control Handle

1.Move control handle FORWARD or DOWN to split wood.

2.Release the control handle to stop the wedge movement.

3.Move control handle BACK or UP to return the wedge.

Vertical Position

•Pull the horizontal beam lock out to release the beam and pivot the beam to the vertical position.

•To lock the beam in the vertical position, pull out on the vertical beam lock and rotate it to secure the beam. See Figure 7.

•Stand in front of the unit to operate the control handle and to stabilize the log. See Figure 8A.

Figure 8

LS275 specifications

The Troy-Bilt LS275 is a versatile and efficient rear-tine tiller designed to make gardening and landscaping tasks more manageable. This machine is particularly suited for homeowners with larger gardens who require reliable tilling and soil preparation capabilities.

One of the standout features of the LS275 is its powerful engine. Equipped with a 208cc OHV engine, this tiller offers ample power for breaking up tough soil, ensuring that you can tackle even the most challenging garden plots. Its reliable starting system allows users to get to work quickly, minimizing downtime.

A key aspect of the LS275 is its rear-tine design, which provides stability and allows for deeper tilling. This configuration offers improved control and maneuverability, particularly in tight spaces or when working in uneven terrain. The tilling width of 18 inches is ideal for typical garden sizes, while the adjustable tilling depth, ranging from 3 to 7 inches, enables users to customize the tilling process according to specific garden needs.

The Troy-Bilt LS275 is designed with user comfort and convenience in mind. Its adjustable handle can be tailored to suit users of varying heights, reducing strain during extended use. The lightweight construction, combined with the counter-rotating tines, ensures that the tiller can glide through the soil with ease, allowing for efficient operation and less fatigue.

The tines themselves are made from durable materials that are built to withstand the rigors of tough soil conditions. The counter-rotating action of the tines helps to break up hard-packed soil and incorporates organic matter effectively, contributing to healthier garden beds.

Another notable feature of the LS275 is its robust 6-inch rear wheels. These provide excellent traction and stability, making it easier to maneuver across different terrains while maintaining control over tilling depth and width.

Safety is also a priority with the LS275, featuring an easy-access throttle control and a safety guard that helps protect the user from debris.

Overall, the Troy-Bilt LS275 stands out for its power, efficiency, and user-friendly features, making it a great choice for both novice and experienced gardeners looking to optimize their soil preparation efforts. With its combination of reliability and performance, this tiller can help transform any garden into a thriving, productive space.