Troy-Bilt LS275 manual Know Your LOG Splitter, Stopping Engine, Control Handle, Beam Locks

Page 7

SECTION 3: KNOW YOUR LOG SPLITTER

Compare the illustration in Figure 7 below with the controls on your log splitter, and get familiar with its features before starting to operate. Know how to stop the machine quickly in the event of an emergency.

Cylinder

Tongue

Jack Stand

Horizontal

Beam Lock

Control Handle

Wedge

Beam Assembly

Log Cradle

Vertical Beam Lock

Reservoir Tank

Tail Light

How it works

 

Reverse

 

To return wedge

 

Neutral To stop

 

To split wood

Control

Forward

Handle

Horizontal

Vertical

Beam Lock

Beam Lock

Figure 7

Control Handle

The control handle has three positions. See Figure 7.

•Move control handle FORWARD or DOWN to move wedge down to split wood.

NOTE: Control handle will return to neutral position as soon as handle is released.

•Release the control handle to stop the wedge movement.

•Move control handle BACK or UP to return the wedge toward the cylinder. The control handle will lock in the disengaged position. It will return to neutral automatically when the return stroke is complete.

Beam Locks

These two locks, as their name suggests, are used to secure the beam in the horizontal or the vertical position. The vertical beam lock is located next to the oil filter. The horizontal beam lock is located on the beam support latch bracket. See Figure 7.

Engine Controls

See the accompanying engine manual for the location and function of the controls on the engine.

Stopping Engine

•Move throttle control lever to STOP or OFF position.

•Turn off the fuel valve.

•Disconnect spark plug wire and ground against the engine to prevent unintended starting.

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the accompanying engine manual before operating your machine.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operator’s Manual Table of Contents General Practices Important Safe Operation PracticesPreparation Operation Maintenance and StorageYour Responsibility Assembling Your LOG Splitter Preparing the Log Splitter Beam Locks Know Your LOG SplitterStopping Engine Control HandleStarting Engine Using the Log SplitterOperating Your LOG Splitter Gas and Oil Fill-UpTransporting the Log Splitter Operating TipsRaising and Lowering Beam Maintaining Your LOG Splitter Adjusting Your LOG SplitterFlexible Pump Coupler Beam and Splitting WedgeHose Clamps EngineStoring Your LOG Splitter TroubleshootingHydraulic Troubleshooting Parts List for Model LS275 Model LS275 MANUFACTURER’S Limited Warranty for

LS275 specifications

The Troy-Bilt LS275 is a versatile and efficient rear-tine tiller designed to make gardening and landscaping tasks more manageable. This machine is particularly suited for homeowners with larger gardens who require reliable tilling and soil preparation capabilities.

One of the standout features of the LS275 is its powerful engine. Equipped with a 208cc OHV engine, this tiller offers ample power for breaking up tough soil, ensuring that you can tackle even the most challenging garden plots. Its reliable starting system allows users to get to work quickly, minimizing downtime.

A key aspect of the LS275 is its rear-tine design, which provides stability and allows for deeper tilling. This configuration offers improved control and maneuverability, particularly in tight spaces or when working in uneven terrain. The tilling width of 18 inches is ideal for typical garden sizes, while the adjustable tilling depth, ranging from 3 to 7 inches, enables users to customize the tilling process according to specific garden needs.

The Troy-Bilt LS275 is designed with user comfort and convenience in mind. Its adjustable handle can be tailored to suit users of varying heights, reducing strain during extended use. The lightweight construction, combined with the counter-rotating tines, ensures that the tiller can glide through the soil with ease, allowing for efficient operation and less fatigue.

The tines themselves are made from durable materials that are built to withstand the rigors of tough soil conditions. The counter-rotating action of the tines helps to break up hard-packed soil and incorporates organic matter effectively, contributing to healthier garden beds.

Another notable feature of the LS275 is its robust 6-inch rear wheels. These provide excellent traction and stability, making it easier to maneuver across different terrains while maintaining control over tilling depth and width.

Safety is also a priority with the LS275, featuring an easy-access throttle control and a safety guard that helps protect the user from debris.

Overall, the Troy-Bilt LS275 stands out for its power, efficiency, and user-friendly features, making it a great choice for both novice and experienced gardeners looking to optimize their soil preparation efforts. With its combination of reliability and performance, this tiller can help transform any garden into a thriving, productive space.
Top Page Image Contents