White Outdoor 393 Cleaning Tine Area, Belt Replacement, Reverse Drive Belt, Forward Drive Belt

Page 12

Cleaning Tine Area

Clean the underside of the tine shield after each use. The dirt washes off the tines easier if rinsed off immediately instead of after it dries. Always towel dry the tiller afterwards and apply a light coat of oil or silicone to prevent rusting or water damage.

IMPORTANT: Never use a "pressure washer” to clean your tiller. Water can penetrate tight areas of the tiller and its chain case and cause serious damage to the unit.

Belt Replacement

Your tiller has been engineered with belts made of special material (Kevlar Tensile). They should not be replaced with an off-the-shelf belt. If belt replacement is required, order belt or belts by part number from your nearest authorized service dealer. See parts list.

Reverse Drive Belt

Disconnect and ground the spark plug wire against the engine. Remove the belt cover from the left side of the tiller as follows.

Remove two self-tapping screws and flat washers from the front of belt cover. See Figure 14.

Remove the hex stop nut and flat washer from the side of the belt cover. Remove belt cover.

Remove the hex nut which secures the reverse idler pulley to the idler bracket. Slide idler pulley out and remove the belt. See Figure 15.

Reverse Idler

Forward

Pulley

Belt

Hex Nut

 

Engine Pulley

Reverse Belt

 

Transmission

 

Pulley

Figure 15

Reassemble the new belt, following instructions in reverse order. Make certain the reverse drive belt is assembled with the wide side of the belt against the transmission and engine pulleys.

Be certain to adjust the clutch control as instructed in the final clutch adjustment section of assembly instructions.

Hex Washer

Lock Nut &

 

Forward Drive Belt

Screw

Flat Washer

Belt Cover

• Remove the reverse drive belt as instructed in the

 

 

previous section.

 

 

 

 

 

 

• Remove the belt keeper from the idler pulley by

 

 

 

removing the idler pulley nut.

 

 

 

• Lift belt off the idler pulley and transmission pulley.

 

 

 

See Figure 15.

 

 

 

• Using a 9/16" wrench, remove bolt from engine

 

 

 

pulley.

 

 

 

• Push reverse idler pulley bracket forward, and

 

 

 

remove engine pulley and belt. See Figure 16.

 

 

 

• Reassemble the new belt, following instructions in

 

Figure 14

 

reverse order. Make certain the forward drive belt is

• Lift the belt off the transmission pulley.

assembled with the wide side of the belt away from

the transmission and engine pulleys.

 

 

 

12

Image 12
Contents OPERATOR’S Manual Table of Contents Important Safe Operation Practices TrainingPreparation OperationMaintenance & Storage Your ResponsibilityBefore Assembly Attaching Handle AssemblyAssembling Your Tiller Removing Unit From CartonFinal Clutch Adjustment Attaching Clutch Control CablesForward Cable Reverse CableThrottle Control Choke LeverReverse Tine Drive Clutch Lever Depth StakeOperating Your Tiller Wheel Yoke Adjustment Depth Stake AdjustmentRemoving End Caps Handle Pressure Transporting The TillerCultivating Maintaining Your Tiller Cleaning Tine Area Belt ReplacementReverse Drive Belt Forward Drive BeltTrouble Shooting Guide Off-Season StorageModel Model Description25 26 Model Page Page MANUFACTURER’S Limited Warranty for

393 specifications

The White Outdoor 393 is a robust and reliable lawn mower that has garnered attention for its durability and performance in residential and commercial landscaping. Designed for users seeking efficiency and ease of use, the 393 features a powerful engine and advanced technology that make lawn maintenance a breeze.

At the heart of the White Outdoor 393 is its powerful engine, which provides ample horsepower to handle various cutting conditions. This high-performance engine is designed to deliver optimal torque and speed, enabling users to tackle thick grass and uneven terrains with ease. The inclusion of a reliable starting system ensures that users can fire up the mower without hassle, even in colder weather.

One of the standout features of the White Outdoor 393 is its precision cutting system. Equipped with sharp, durable blades that can be easily adjusted, this mower allows for precise cutting height settings. Users can choose from various height options to suit their lawn's needs, ensuring a clean and professional cut every time. The mower's wide cutting deck enhances its productivity, allowing users to cover more ground in less time.

The White Outdoor 393 also prioritizes comfort and user experience. The mower comes equipped with an ergonomic handle that provides a secure grip, reducing fatigue during extended use. Additionally, its lightweight construction makes it easy to maneuver, even in tight spaces. The compact design allows for easy storage, making it an ideal choice for homeowners with limited space.

In terms of technology, the White Outdoor 393 integrates smart design features such as a mulching option, which finely chops grass clippings and distributes them back onto the lawn, promoting healthy growth and reducing waste. This eco-friendly feature not only saves users time but also benefits the environment.

Safety is another essential aspect of the White Outdoor 393. It is designed with safety mechanisms that ensure the mower operates only when all safety conditions are met. This provides peace of mind for users while operating the machine.

In summary, the White Outdoor 393 is a well-rounded lawn mower that combines power, efficiency, and user-friendly features. With its dependable engine, precision cutting capabilities, and safety measures, it stands out as a reliable choice for those seeking a high-performing lawn care solution. Whether for residential use or light commercial applications, the White Outdoor 393 continues to impress users with its performance and ease of operation.