White Outdoor 393 manual Removing End Caps, Wheel Yoke Adjustment, Depth Stake Adjustment

Page 9

Removing End Caps

The end cap, which are used to avoid tilled soil from overflowing onto unwanted areas, are removable from the outer axle. Remove the hairpin clip and clevis pin that is securing each end cap and slide end cap off the axle. See Figure 8.

 

End Cap

Clevis Pin

Hairpin Clip

 

Figure 8

Controlling Speed And Tilling Depth

Wheel Yoke Adjustment

Place wheel yoke so that the wheels are forward (nearest point between wheels and tines) for shallow tilling, cultivating and transport. The forward speed will increase. Turn yoke around (farthest point between wheels and tines) for deep tilling. Forward speed will decrease. See Figure 9.

Position Wheel Yoke

Position Wheel Yoke

For Shallow Tilling

For Deep Tilling

Figure 9

Depth Stake Adjustment

The depth stake acts as a brake for the tiller and controls the depth and speed at which the machine will operate. Remove the clevis pin and hairpin clip to raise or lower depth stake. See Figure 7.

.

 

Transport

 

Position

 

Depth Stake

 

Shallow Tilling

Wheel Setting For

Deep Tilling

Deep Tilling

 

Figure 10

By increasing the depth of the depth stake, the forward speed of the machine is reduced and the working depth is increased. When the depth stake is raised, the working depth of the machine is reduced and the forward speed is increased. The working depth of the machine may be predetermined by setting the depth stake and wheels so that the wheels are about four inches from the ground when the tines and depth stake are resting on the ground. This setting will permit a working depth of about four inches. When presetting the working depth, the handles should be adjusted so the hand grips are a little above waist. The tiller will be lower when the tines and depth stake penetrate the ground.

Figure 11

When tilling, leave approximately 8 inches of untilled soil between the first and second tilling paths, then make the third path between the first and second. In some soils, the desired depth is obtained the first time over the garden. In other soils, the desired depth is obtained by going over the garden two or three times. In the latter case, the depth stake should be lowered before each succeeding pass over the garden. Passes should be made across the length and width of the garden alternately. Rocks which are turned up should be removed from the garden area. See Figure 12.

9

Image 9
Contents OPERATOR’S Manual Table of Contents Training Important Safe Operation PracticesPreparation OperationYour Responsibility Maintenance & StorageAttaching Handle Assembly Before AssemblyAssembling Your Tiller Removing Unit From CartonAttaching Clutch Control Cables Final Clutch AdjustmentForward Cable Reverse CableChoke Lever Throttle ControlReverse Tine Drive Clutch Lever Depth StakeOperating Your Tiller Wheel Yoke Adjustment Depth Stake AdjustmentRemoving End Caps Handle Pressure Transporting The TillerCultivating Maintaining Your Tiller Belt Replacement Cleaning Tine AreaReverse Drive Belt Forward Drive BeltOff-Season Storage Trouble Shooting GuideModel Description Model25 26 Model Page Page MANUFACTURER’S Limited Warranty for

393 specifications

The White Outdoor 393 is a robust and reliable lawn mower that has garnered attention for its durability and performance in residential and commercial landscaping. Designed for users seeking efficiency and ease of use, the 393 features a powerful engine and advanced technology that make lawn maintenance a breeze.

At the heart of the White Outdoor 393 is its powerful engine, which provides ample horsepower to handle various cutting conditions. This high-performance engine is designed to deliver optimal torque and speed, enabling users to tackle thick grass and uneven terrains with ease. The inclusion of a reliable starting system ensures that users can fire up the mower without hassle, even in colder weather.

One of the standout features of the White Outdoor 393 is its precision cutting system. Equipped with sharp, durable blades that can be easily adjusted, this mower allows for precise cutting height settings. Users can choose from various height options to suit their lawn's needs, ensuring a clean and professional cut every time. The mower's wide cutting deck enhances its productivity, allowing users to cover more ground in less time.

The White Outdoor 393 also prioritizes comfort and user experience. The mower comes equipped with an ergonomic handle that provides a secure grip, reducing fatigue during extended use. Additionally, its lightweight construction makes it easy to maneuver, even in tight spaces. The compact design allows for easy storage, making it an ideal choice for homeowners with limited space.

In terms of technology, the White Outdoor 393 integrates smart design features such as a mulching option, which finely chops grass clippings and distributes them back onto the lawn, promoting healthy growth and reducing waste. This eco-friendly feature not only saves users time but also benefits the environment.

Safety is another essential aspect of the White Outdoor 393. It is designed with safety mechanisms that ensure the mower operates only when all safety conditions are met. This provides peace of mind for users while operating the machine.

In summary, the White Outdoor 393 is a well-rounded lawn mower that combines power, efficiency, and user-friendly features. With its dependable engine, precision cutting capabilities, and safety measures, it stands out as a reliable choice for those seeking a high-performing lawn care solution. Whether for residential use or light commercial applications, the White Outdoor 393 continues to impress users with its performance and ease of operation.