White Outdoor 393 manual Attaching Clutch Control Cables, Final Clutch Adjustment, Forward Cable

Page 6

Attaching Clutch Control Cable(s)

Forward Cable

Attach the end of the forward cable to the bracket underneath the handle assembly as follows. The forward clutch cable is the cable which is attached closer to the rear of the tiller.

•Loosen the hex nut on the threaded rod near the end of the cable, and move it up the rod as far as it will go.

•Unthread the rod from the rest of the cable. Hook the “Z” end of the rod into the bracket underneath the handle assembly from the right hand side.

•Thread the rod back into the cable until the cable is straight. Do not tighten it enough to put any tension on the spring.

•Thread the hex nut down against the end of cable. Use a pair of pliers and a wrench to lock the nut against the rod.

NOTE: Do not overtighten control cable. Too much tension may cause it to break when engaged.

Reverse Cable

The reverse clutch cable is the cable which is attached closer to the front of the tiller. Attach the end of the reverse cable to the reverse tine drive clutch lever, above the handle assembly, in the same manner as you attached the forward cable. See Figure 4.

Figure 4

Z End Hooked

Reverse Tine

in Bracket

Engagement Lever

Threaded

 

Forward Tine

Rod

 

Engagement Handle

Hex Nut

 

 

 

 

Z End Hooked

 

 

in Bracket

 

 

Threaded

 

Hex Nut

Rod

 

 

Final Clutch Adjustment

To check the clutch cable adjustment, proceed as follows.

•Disconnect the spark plug wire and move it away from the spark plug to prevent accidental starting.

•Engage and release the tine engagement handle, then the reverse tine engagement lever. If an excessive noise is heard when releasing either the tine drive clutch handle or lever, the cable may be

too loose. Adjust either the forward or reverse clutch cable by loosening the hex nut, threading the rod into the cable one or two turns, then retightening the nut.

•With tine engagement handle in neutral (released) as shown in Figure 5, pull the starter rope several times. The tines should not turn. If they turn forward, loosen the hex nut on the forward cable (underneath the handle assembly). If they turn toward the rear, loosen the hex nut on the reverse cable (above the handle assembly). Unthread the rod from the cable 2 or 3 turns. Retighten the hex nut, and check again for correct adjustment. See Figure 5.

Forward Tine

Engagement Lever

Reverse Tine

Engagement Lever

Figure 5

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents OPERATOR’S Manual Table of Contents Preparation Important Safe Operation PracticesTraining OperationMaintenance & Storage Your ResponsibilityAssembling Your Tiller Before AssemblyAttaching Handle Assembly Removing Unit From CartonForward Cable Final Clutch AdjustmentAttaching Clutch Control Cables Reverse CableReverse Tine Drive Clutch Lever Throttle ControlChoke Lever Depth StakeOperating Your Tiller Wheel Yoke Adjustment Depth Stake AdjustmentRemoving End Caps Handle Pressure Transporting The TillerCultivating Maintaining Your Tiller Reverse Drive Belt Cleaning Tine AreaBelt Replacement Forward Drive BeltTrouble Shooting Guide Off-Season StorageModel Model Description25 26 Model Page Page MANUFACTURER’S Limited Warranty for

393 specifications

The White Outdoor 393 is a robust and reliable lawn mower that has garnered attention for its durability and performance in residential and commercial landscaping. Designed for users seeking efficiency and ease of use, the 393 features a powerful engine and advanced technology that make lawn maintenance a breeze.

At the heart of the White Outdoor 393 is its powerful engine, which provides ample horsepower to handle various cutting conditions. This high-performance engine is designed to deliver optimal torque and speed, enabling users to tackle thick grass and uneven terrains with ease. The inclusion of a reliable starting system ensures that users can fire up the mower without hassle, even in colder weather.

One of the standout features of the White Outdoor 393 is its precision cutting system. Equipped with sharp, durable blades that can be easily adjusted, this mower allows for precise cutting height settings. Users can choose from various height options to suit their lawn's needs, ensuring a clean and professional cut every time. The mower's wide cutting deck enhances its productivity, allowing users to cover more ground in less time.

The White Outdoor 393 also prioritizes comfort and user experience. The mower comes equipped with an ergonomic handle that provides a secure grip, reducing fatigue during extended use. Additionally, its lightweight construction makes it easy to maneuver, even in tight spaces. The compact design allows for easy storage, making it an ideal choice for homeowners with limited space.

In terms of technology, the White Outdoor 393 integrates smart design features such as a mulching option, which finely chops grass clippings and distributes them back onto the lawn, promoting healthy growth and reducing waste. This eco-friendly feature not only saves users time but also benefits the environment.

Safety is another essential aspect of the White Outdoor 393. It is designed with safety mechanisms that ensure the mower operates only when all safety conditions are met. This provides peace of mind for users while operating the machine.

In summary, the White Outdoor 393 is a well-rounded lawn mower that combines power, efficiency, and user-friendly features. With its dependable engine, precision cutting capabilities, and safety measures, it stands out as a reliable choice for those seeking a high-performing lawn care solution. Whether for residential use or light commercial applications, the White Outdoor 393 continues to impress users with its performance and ease of operation.
Top Page Image Contents