Assembling Your Tiller, Before Assembly | White Outdoor 393 manual

SECTION 2: ASSEMBLING YOUR TILLER

NOTE: References to right or left side of the tiller are determined from behind the unit in the operating position.

Removing Unit From Carton

•Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.

•Remove all loose parts included with unit (i.e., operator’s manual, etc.)

•Cut corners and lay carton down flat.

•Remove packing material.

•Roll or slide unit out of carton. Check carton thoroughly for loose parts.

•Extend control cable(s) to the rear of the tiller and lay them on the floor. Be careful not to bend or kink control cable(s).

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your machine.

Before Assembly

WARNING: Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

Attaching Tailpiece And Depth Stake

Remove the two self-tapping screws on the frame. Slide the tailpiece into the frame with the lower hole in the tailpiece toward the front. Secure with screws just removed. See Figure 1.

Tailpiece

Depth

Stake

Self-Tapping

Screws

Figure 1

	Handle	Spark	Hex Lock Nut
	Brace	Spark
Hand Knob		Plug


Handle
Hex Bolt &
Cupped Washer
Frame Half			Shoulder Bolt

Figure 2

•Insert the handle assembly between the two frame halves. Insert the hex bolt just removed through the frame halves, handle assembly, and into the cable guide bracket (notch in cable guide bracket goes over the flange on the frame). Tighten securely.

•Loosen the hand knob which secures the handle brace to the handle assembly.

•Remove the hex lock nut from on top of the engine, just to the left of the spark plug. Attach the curved end of the handle brace to the top of the engine, using hex lock nut just removed. Tighten securely. See Figure 3.

•Select one of the three handle height positions (three notches in welded bracket), and tighten the hand knob to secure the handle in desired position. Make certain carriage bolt is seated securely into one of the three positions provided.

Spark

Plug

Handle

Brace

Hex Lock

Nut

Tecumseh Engine

Figure 3

Attaching Handle Assembly

•Remove the hex bolt and cupped washer from the top right side of the frame halves. Hold the cable guide bracket on the left side of the frame as it will fall when the bolt is removed. See Figure 2.

393 specifications

The White Outdoor 393 is a robust and reliable lawn mower that has garnered attention for its durability and performance in residential and commercial landscaping. Designed for users seeking efficiency and ease of use, the 393 features a powerful engine and advanced technology that make lawn maintenance a breeze.

At the heart of the White Outdoor 393 is its powerful engine, which provides ample horsepower to handle various cutting conditions. This high-performance engine is designed to deliver optimal torque and speed, enabling users to tackle thick grass and uneven terrains with ease. The inclusion of a reliable starting system ensures that users can fire up the mower without hassle, even in colder weather.

One of the standout features of the White Outdoor 393 is its precision cutting system. Equipped with sharp, durable blades that can be easily adjusted, this mower allows for precise cutting height settings. Users can choose from various height options to suit their lawn's needs, ensuring a clean and professional cut every time. The mower's wide cutting deck enhances its productivity, allowing users to cover more ground in less time.

The White Outdoor 393 also prioritizes comfort and user experience. The mower comes equipped with an ergonomic handle that provides a secure grip, reducing fatigue during extended use. Additionally, its lightweight construction makes it easy to maneuver, even in tight spaces. The compact design allows for easy storage, making it an ideal choice for homeowners with limited space.

In terms of technology, the White Outdoor 393 integrates smart design features such as a mulching option, which finely chops grass clippings and distributes them back onto the lawn, promoting healthy growth and reducing waste. This eco-friendly feature not only saves users time but also benefits the environment.

Safety is another essential aspect of the White Outdoor 393. It is designed with safety mechanisms that ensure the mower operates only when all safety conditions are met. This provides peace of mind for users while operating the machine.

In summary, the White Outdoor 393 is a well-rounded lawn mower that combines power, efficiency, and user-friendly features. With its dependable engine, precision cutting capabilities, and safety measures, it stands out as a reliable choice for those seeking a high-performing lawn care solution. Whether for residential use or light commercial applications, the White Outdoor 393 continues to impress users with its performance and ease of operation.