3.Remove the two Phillips PM2.5×4.0 screws (2) that secure the speakers to the computer.

4.Slide the right speaker (3) to the right to disengage it from the tabs (4) built into the base enclosure.

5.Remove the speakers (5).

Reverse this procedure to install the speakers.

ExpressCard assembly

Description

Spare part number

 

 

ExpressCard assembly

639479-001

NOTE: The ExpressCard assembly spare part kit does not include the ExpressCard assembly cable.

 

The ExpressCard assembly cable is included in the Cable Kit, spare part number 639473-001.

 

 

 

Before removing the ExpressCard assembly, follow these steps:

1.Shut down the computer.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 33).

a.Service cover (see Solid-state module on page 34)

b.Solid-state module (see Solid-state module on page 34)

c.Optical drive (see Optical drive on page 38)

56

Chapter 4 Removal and replacement procedures