Display assembly
Description | Spare part number |
The display assembly is spared at the subcomponent level only
Before removing the display assembly, follow these steps:
1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 33), and then remove the following components:
a.Service cover (see
b.
c.Optical drive (see Optical drive on page 38)
d.Keyboard (see Keyboard on page 47)
e.Base enclosure (see Base enclosure on page 52)
Remove the display assembly:
1.Turn the computer right side up, with the front toward you.
2.Open the computer.
3.Disconnect the display panel cable (1) from the system board.
58 | Chapter 4 Removal and replacement procedures |