c.Optical drive (see Optical drive on page 38)
d.Keyboard (see Keyboard on page 47) Remove the base enclosure:
1.Remove the Torx8 TM2.5×9.0 screw that secures the base enclosure to the computer.
2.Close the computer.
3.Turn the computer upside down, with the rear panel toward you.
4.Remove the following:
●Four Torx8 TM2.5×9.0 screws (1) from the computer rear panel
●Two rubber screw covers (2) (available in the Rubber Kit, spare part number
●Two Torx8 TM2.5×9.0 screws (3) from the surface of the base enclosure
●Three Phillips PM2.0×3.0 (4) screws from the battery bay
Component replacement procedures | 53 |