2.Disconnect the following the cables from the system board:
●Power button board cable (included in the power button board spare part kit, spare part number
●TouchPad cable (included in the Cable Kit, spare part number
●Function board cable (included in the function board spare part kit, spare part number
●Power connector cable (included in the Cable Kit, spare part number
3.Turn the top cover upside down, with the rear panel toward you.
4.Remove the three Phillips PM2.5×4.2 screws that secure the system board to the top cover.
5.Lift the left side of the system board (1) until it rests at an angle.
66 | Chapter 4 Removal and replacement procedures |