Matsushita CF-18NHHZXBM service manual Setting the PAD PCB and the I/O PCB, Assembly of PAD PCB

7.2.9.Setting the PAD PCB and the I/O PCB

1.Fix the I/O PCB using the four Screws<P> and the two Screws<Q>.

2.Fix the PAD PCB using the three Screws<O>.

3.Connect the SW Cable to the Connector (CN801) of the

PAD PCB.

Screws <O>:DFHE5025XA

Screws <P>:DFHE5058ZB

Screws <Q>:DRSB2+5FKL

	<O><O>		<Q> I/O PCB
Connector	<O>	PAD PCB	<Q>
(CN801)

<P>

!Assembly of PAD PCB

PAD PCB

SW FFC

Sub material:

PET TAPE 1

(19 mm width x 3 cm) For models with measures against whiskers, use

the Tape of

19 mm width x 2 cm

PAD FFC

Connector surface

		0~1mm
	Fold back and attach.
	Allowable misalignment
	of the edges
	0~1.5mm
		FFC CN Stopper
Connector surface		Match to the center
		of the Connector.

7-20