Matsushita CF-18NHHZXBM service manual Display Unit, Assembly of LCD Front Case

7.2.5.Assembling the Anntena Cover, the Tablet Latch Cover and the LCD Rear Case

1. Fix the LCD Rear Case using the 10 Screws <X> and the

2 Screws <W>.

<X>

2.	Attach the Antenna Covers and the Tablet Latch Cover to
	the Display Unit.
3.	Tighten the 8 Screws <V> on the back of the Display Unit.
4.	Turn the Display Unit over, and tighten the 8 Screws. <V>

Screws <V> : DRQT26+E5FKL

Screws <W> : DXYN3+J10FNL

Screws <X> : DXYN2+J6FNL

<X>

<X><X> <X>

Antenna Cover<V>

<V>

<V>

<V>

<V> <V>

<V>

<V> <V> <V>

<W> LCD Rear Case <W>

<X>

<X><X> <X> <X>

<V>

<V> <V>

<V>	<V> Antenna Cover
<V>
Tablet Latch Cover

!Assembly of LCD Front Case

LCD Front Assy

Magnet Assy

0~0.5mm

Magnet Tape 0~1mm Magnet

–1mm(Both on the top and the side)

Be free of overhang..

Be free of overhang..

Be free of overhang.

TS Tape

Note for attachment

Ensure it does not come over the display part. Don’t get into a LCD indication range.

Attach and apply the load 30 to 40N (3.0 to 4.0 Kgf).

Position of pasting TS Tape. 0~0.5mm

0~0.5mm

Place this to the ribs. 0~0.5mm

7-14