Matsushita CF-18NHHZXBM Removing the DU Lid Unit Wireless Module Port PCB and Modem, Du Lid

7.1.6. Removing the DU Lid Unit		7.1.8. Removing		the Wireless Module,
<G>	<G><G>	Port PCB and Modem
	<G>	<J>
DU LID Angle	<G>	<K> <J>	<I> <I>
		<K>		<I>
		Modem		Port PCB
	DU LID	Bat Con Angle		Wireless Module

Connector (J5)

Connector (J6)

1. Remove the five Screws <G>.

2. Remove the DU Lid Angle and DU Lid.

Screws <G>:DRHM5025YA

7.1.7.Removing the Audio PCB

Audio PCB <H>

Connector (CN901)

1.Remove the two Screws <H>.

2.Disconnect the Cable from a Connector (CN901).

3.Remove the Audio PCB.

Screws <H>:DRSB2+5FKL

Note:

This procedure is not necessary if the computer is not equipped with Wireless Module or Modem PCB.

1.Disconnect the two Antenna Cables from two Connectors (J5, J6).

2.Remove the Wireless Module.

3.Remove the three Screws <I>.

4.Remove the Port PCB.

5.Remove the two Screws <J>.

6.Remove the Modem.

7.Disconnect the Modem cable from the connector.

8.Remove the two Screws <K>.

9.Remove the BAT CON angle.

Screws <I>:DRSB2+5FKL

Screws <J>:XSB2+4FNL

Screws <K>:DRSB2+5FKL

7.1.9.Removing the SD PCB

<h>

<h> <h>

SD PCB

Connector (CN21)

1.Disconnect the Cable from Connector(CN21).

2.Remove the three Screws <h>

3.Remove the SD PCB.

Screws <h>:DXQN2+A22FNL

7-3